Data-Driven Dynamic Modeling and Online Monitoring for Multiphase and Multimode Batch Processes with Uneven Batch Durations

Batch processes are often characterized by piecewise linear dynamics due to varying operating conditions. Multiphase and multimode modeling of batch processes is a common technique that offers insight into the process operation and improved online monitoring. However, existing monitoring methods have several drawbacks such as neglecting process dynamics, requiring separate treatment of transient behavior, and relying on uniformity between batches. These challenges are addressed here by proposing a new strategy to construct a dynamic model for monitoring multimode and multiphase batch processes. A linear dynamic system partitions phases and describes local dynamic behavior before modes of operation are clustered based on the global differences between batches. Lastly, an expectation maximization algorithm for multibatch data in the same mode is applied to estimate phase parameters. Process monitoring results on a benchmark penicillin fermentation data set suggest a significant improvement over previous met...

[1]  Zhiqiang Ge,et al.  Supervised linear dynamic system model for quality related fault detection in dynamic processes , 2016 .

[2]  Chunhui Zhao,et al.  An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring , 2016 .

[3]  John F. MacGregor,et al.  Multivariate SPC charts for monitoring batch processes , 1995 .

[4]  Alberto Ferrer,et al.  Real-time synchronization of batch trajectories for on-line multivariate statistical process control using Dynamic Time Warping , 2011 .

[5]  C. E. Schlags,et al.  Multivariate statistical analysis of an emulsion batch process , 1998 .

[6]  Ping Zhang,et al.  Subspace method aided data-driven design of fault detection and isolation systems , 2009 .

[7]  Manabu Kano,et al.  Statistical process monitoring based on dissimilarity of process data , 2002 .

[8]  Junghui Chen,et al.  On-line batch process monitoring using dynamic PCA and dynamic PLS models , 2002 .

[9]  Fuli Wang,et al.  Stage-based soft-transition multiple PCA modeling and on-line monitoring strategy for batch processes , 2007 .

[10]  Furong Gao,et al.  Two-directional concurrent strategy of mode identification and sequential phase division for multimode and multiphase batch process monitoring with uneven lengths , 2018 .

[11]  S. Joe Qin,et al.  Statistical process monitoring: basics and beyond , 2003 .

[12]  Theodora Kourti,et al.  Multivariate dynamic data modeling for analysis and statistical process control of batch processes, start‐ups and grade transitions , 2003 .

[13]  Wei Sun,et al.  A method for multiphase batch process monitoring based on auto phase identification , 2011 .

[14]  Anil K. Jain,et al.  Data clustering: a review , 1999, CSUR.

[15]  Radford M. Neal.  Pattern Recognition and Machine Learning , 2007, Technometrics.

[16]  Fuli Wang,et al.  Two‐dimensional dynamic PCA for batch process monitoring , 2005 .

[17]  Yuan Yao,et al.  Phase and transition based batch process modeling and online monitoring , 2009 .

[18]  Tohru Katayama,et al.  Subspace Methods for System Identification , 2005 .

[19]  Prashant Mhaskar,et al.  Subspace identification for data‐driven modeling and quality control of batch processes , 2016 .

[20]  J. Carstensen,et al.  Aligning of single and multiple wavelength chromatographic profiles for chemometric data analysis using correlation optimised warping , 1998 .

[21]  Youxian Sun,et al.  Step-wise sequential phase partition (SSPP) algorithm based statistical modeling and online process monitoring , 2013 .

[22]  Zhiqiang Ge,et al.  Data‐based linear Gaussian state‐space model for dynamic process monitoring , 2012 .

[23]  John F. MacGregor,et al.  Multi-way partial least squares in monitoring batch processes , 1995 .

[24]  Furong Gao,et al.  Subspace identification for two-dimensional dynamic batch process statistical monitoring , 2008 .

[25]  Fuli Wang,et al.  Sub-PCA Modeling and On-line Monitoring Strategy for Batch Processes (R&D Note) , 2004 .

[26]  Biao Huang,et al.  Parameter estimation in batch process using EM algorithm with particle filter , 2013, Comput. Chem. Eng..

[27]  Junghui Chen,et al.  Development of hidden semi-Markov models for diagnosis of multiphase batch operation , 2011 .

[28]  J. Macgregor,et al.  Monitoring batch processes using multiway principal component analysis , 1994 .

[29]  Furong Gao,et al.  Statistical analysis and online monitoring for handling multiphase batch processes with varying durations , 2011 .

[30]  Furong Gao,et al.  A survey on multistage/multiphase statistical modeling methods for batch processes , 2009, Annu. Rev. Control..

[31]  Ali Cinar,et al.  Statistical monitoring of multistage, multiphase batch processes , 2002 .

[32]  Geert Gins,et al.  An extensive reference dataset for fault detection and identification in batch processes , 2015 .

[33]  Chunhui Zhao,et al.  Concurrent phase partition and between‐mode statistical analysis for multimode and multiphase batch process monitoring , 2014 .

[34]  Furong Gao,et al.  Batch process monitoring based on support vector data description method , 2011 .

[35]  Donghua Zhou,et al.  A New Method of Dynamic Latent-Variable Modeling for Process Monitoring , 2014, IEEE Transactions on Industrial Electronics.

[36]  Biao Huang,et al.  State Estimation in Batch Process Based on Two-Dimensional State-Space Model , 2014 .

[37]  Geert Gins,et al.  Hybrid derivative dynamic time warping for online industrial batch-end quality estimation , 2012 .

[38]  Staffan Folestad,et al.  Real-time alignment of batch process data using COW for on-line process monitoring , 2006 .