Wear due to relative motion between component surfaces is one of the primary modes of failure for many engineered systems. Unfortunately, it is difficult to accurately predict component life due to wear as reported wear rates generally exhibit large scatter. This paper analyzes a reciprocating tribometer in an attempt to understand the instrument-related sources of the scatter in measured wear rates. To accomplish this, an uncertainty analysis is completed for wear-rate testing of a commercially available virgin polytetrafluoroethylene pin on 347 stainless steel counterface. It is found that, for the conditions selected in this study, the variance in the experimental data can be traced primarily to the experimental apparatus and procedure. Namely, the principal uncertainty sources were found to be associated with the sample mass measurement and volume determination.
[1]
J. Archard.
Contact and Rubbing of Flat Surfaces
,
1953
.
[2]
P. R. Bevington,et al.
Data Reduction and Error Analysis for the Physical Sciences
,
1969
.
[3]
P. R. Bevington,et al.
Data Reduction and Error Analysis for the Physical Sciences, 2nd ed.
,
1993
.
[4]
Barry N. Taylor,et al.
Guidelines for Evaluating and Expressing the Uncertainty of Nist Measurement Results
,
2017
.
[5]
K. Ludema,et al.
Wear models and predictive equations: their form and content
,
1995
.
[6]
William T. Estler,et al.
Displacement Uncertainty in Interferometric Radius Measurements
,
2002
.