In situ Analysis of Metal Melts in Metallurgic Vacuum Devices by Laser-Induced Breakdown Spectroscopy

We report on rapid in situ analysis of liquid metal melts under reduced ambient pressure by laser-induced breakdown spectroscopy (LIBS) using a transportable system. LIBS denotes a method in which characteristic optical emission line intensities of excited species in laser-generated plasma plumes are used for a quantitative chemical analysis of target materials. It is a fast, noncontact method that can be carried out under various atmospheric conditions, allowing large working distances between the sample under investigation and the detection system. For these reasons, LIBS is applicable in particular for process control in metallurgy under reduced ambient pressure. This was demonstrated for two types of vacuum devices under production conditions at a steel mill. The results of these experiments, including calibration curves for Cr, Ni, and Mg in liquid steel, are presented. The influence of variations in the ambient pressure on the results of the LIBS analysis is discussed within the frame of a generalized shock-wave model for the expansion of the laser-induced plasma plume.

[1]  Vivi Tornari,et al.  Modern technology in artwork conservation: a laser-based approach for process control and evaluation , 2000 .

[2]  J. A. Aguilera,et al.  A comparison of the temperatures and electron densities of laser-produced plasmas obtained in air, argon, and helium at atmospheric pressure , 1999 .

[3]  Mikhail A. Bolshov,et al.  A comparison of nanosecond and femtosecond laser-induced plasma spectroscopy of brass samples , 2000 .

[4]  Franz Oeters,et al.  Metallurgie der Stahlherstellung , 1989 .

[5]  J. Heitz,et al.  Rapid in-situ analysis of liquid steel by laser-induced breakdown spectroscopy , 2001 .

[6]  R. Noll,et al.  Laser-induced breakdown spectrometry — applications for production control and quality assurance in the steel industry , 2001 .

[7]  D. Bäuerle.  Laser Processing and Chemistry , 1996 .

[8]  D. Crosley,et al.  In uence of ambient conditions on the laser air spark , 1996, Laser Applications to Chemical, Security and Environmental Analysis.

[9]  J. D. Winefordner,et al.  Determination of Cobalt in Soil, Steel, and Graphite Using Excited-State Laser Fluorescence Induced in a Laser Spark , 1997 .

[10]  C. Fotakis,et al.  Laser-Induced Breakdown Spectroscopy for Polymer Identification , 1998 .

[11]  J. A. Aguilera,et al.  Improvements in Quantitative Analysis of Steel Composition by Laser-Induced Breakdown Spectroscopy at Atmospheric Pressure Using an Infrared Nd:YAG Laser , 1999 .

[12]  David A. Cremers,et al.  Determination of Uranium in Solution Using Laser-Induced Breakdown Spectroscopy , 1987 .

[13]  Andrew G. Glen,et al.  APPL , 2001 .

[14]  D. Romero,et al.  Effect of Surface Topography in the Characterization of Stainless Steel Using Laser-induced Breakdown Spectrometry , 1999 .

[15]  N. Arnold,et al.  Spherical expansion of the vapor plume into ambient gas: an analytical model , 1999 .

[16]  Á. G. Ureña,et al.  Laser-Induced Breakdown Spectroscopy of AL-Samples: Application to ChemicalAnalysis of Metallic Elementsf , 1995 .

[17]  Reinhard Noll,et al.  Laser-induced breakdown spectroscopy of steel samples using multiple Q-switch Nd:YAG laser pulses , 1995 .