Adsorption of anionic and cationic dyes on activated carbons with different surface chemistries.

The influence of the surface chemical groups of an activated carbon on the removal of different classes of dyes is evaluated. Starting from the same material (NORIT GAC 1240 PLUS), the following treatments were carried out in order to produce a series of samples with different surface chemical properties but with no major differences in their textural properties: oxidation in the liquid phase with 6M HNO(3) and 10 M H(2)O(2) (acid materials) and heat treatment at 700 degrees C in H(2) or N(2) flow (basic materials). The specific micropores volume and mesopores surface area of the materials were obtained from N(2) adsorption equilibrium isotherms at 77K. The surface chemistry was characterised by temperature programmed desorption, by the determination of the point of zero charge (pH(pzc)) and by the evaluation of the acidity/basicity of the samples. Elemental and proximate analyses were also carried out. Equilibrium isotherms of selected dyes (an acid, a basic and a reactive dye) on the mentioned samples were obtained and the results discussed in relation to their surface chemistry. In general, the Langmuir model provided the best fit for the adsorption data. It is shown that the surface chemistry of the activated carbon plays a key role in dye adsorption performance. The basic sample obtained by thermal treatment under H(2) flow at 700 degrees C is the best material for the adsorption of all the tested dyes.

[1]  Á. Linares-Solano.  Textural Characterization of Porous Carbons by Physical Adsorption of Gases , 1986 .

[2]  F. Rodríguez-Reinoso,et al.  The role of carbon materials in heterogeneous catalysis , 1998 .

[3]  S. Allen,et al.  Effect of carbon surface chemistry on the removal of reactive dyes from textile effluent , 2000 .

[4]  P. Dutta,et al.  PHYSICO-CHEMICAL ADSORPTION PROPERTIES ON CHITOSAN FOR DYEHOUSE EFFLUENT , 1999 .

[5]  L. Ballerini,et al.  On the evolution of micropore widths and areas in the course of activation , 1989 .

[6]  J. A. Menéndez,et al.  An experimental and theoretical study of the adsorption of aromatics possessing electron-withdrawing and electron-donating functional groups by chemically modified activated carbons , 1997 .

[7]  J. A. Menéndez,et al.  On the Modification and Characterization of Chemical Surface Properties of Activated Carbon: In the Search of Carbons with Stable Basic Properties , 1996 .

[8]  F. Carrasco-Marín,et al.  Changes in surface chemistry of activated carbons by wet oxidation , 2000 .

[9]  Gavin Walker,et al.  Adsorption of acid dyes on to granular activated carbon in fixed beds , 1997 .

[10]  C. Moreno-Castilla,et al.  Activated carbon surface modifications by adsorption of bacteria and their effect on aqueous lead adsorption , 2001 .

[11]  Xiao-dong Shen,et al.  Removal of coloured organic matter by adsorption onto low-cost waste materials , 1997 .

[12]  T. Karanfil,et al.  Role of Granular Activated Carbon Surface Chemistry on the Adsorption of Organic Compounds. 1. Priority Pollutants , 1999 .

[13]  U. Rott,et al.  Overview of wastewater treatment and recycling in the Textile Processing Industry , 1999 .

[14]  O. Marmagne,et al.  COLOR REMOVAL FROM TEXTILE PLANT EFFLUENTS , 1996 .

[15]  J. Figueiredo,et al.  Modification of the surface chemistry of activated carbons , 1999 .

[16]  J. Donnet,et al.  Contribution to the study of basic surface groups on carbons , 1987 .

[17]  Ljubisa R. Radovic,et al.  Evidence for the protonation of basal plane sites on carbon , 1992 .

[18]  J. F. Porter,et al.  Sorption of acid dyes from effluents using activated carbon , 1999 .

[19]  José L. Figueiredo,et al.  Adsorption of dyes on activated carbons: influence of surface chemical groups , 2003 .

[20]  F. Rodríguez-Reinoso,et al.  A standard adsorption isotherm for the characterization of activated carbons , 1987 .

[21]  G. Walker,et al.  COD removal from textile industry effluent: pilot plant studies , 2001 .