Simulation aided optimization of a historic window's refurbishment

Abstract A recurring problem in retrofitting historic windows is that most traditional means of improving their energy efficiency, e.g. the use of IG units, is often unavailable due to structural and esthetic concerns. Through a refurbishment project of traditional Central-European box windows we aim to investigate the possibility of using less intrusive methods to improve the windows’ heat balance with comparable results. Many different approaches to calculating the energy balance of windows in historic buildings are reviewed and various modelling assumptions and algorithms analyzed to highlight the depth of modelling needed for fenestration heat balance calculation in a historic context. We introduce our new research program for the task: EPICAC-BE, a MATLAB based dynamic energy simulation software. After a validation with the BESTEST suite it is used to compare different retrofit options for a prototype window with and without controlled shading devices. Results indicate the use of double glazing units is not always required or the most favorable. Utilizing the dynamic window concept by combining higher U value with higher solar transmittance with automatic interpane shading can achieve better overall results. Simulations should have a key role as they can lead to designs better satisfying both energy saving and conservational requirements.

[1]  Stephen Selkowitz,et al.  COMFEN 3.0 - Evolution of an Early Design Tool for Commercial Facades and Fenestration Systems , 2012 .

[2]  Dániel Bakonyi,et al.  Possibilities of Simulations in the Planning of the Retrofit of Historical Double Skin Windows , 2014 .

[3]  Dominique Marchio,et al.  Full scale experimental study of single-sided ventilation: Analysis of stack and wind effects , 2011 .

[4]  J. Klems.  A new method for predicting the solar heat gain of complex fenestration systems: II, Detailed description of the matrix layer calculation , 1993 .

[5]  Arnold Janssens,et al.  Effect of moisture inertia models on the predicted indoor humidity in a room , 2005 .

[6]  Svend Svendsen,et al.  Comparison between ASHRAE and ISO thermal transmittance calculation methods , 2007 .

[7]  Dominique Marchio,et al.  Survey of the existing approaches to assess and design natural ventilation and need for further developments , 2009 .

[8]  J. Kurnitski,et al.  Performance of EN ISO 13790 utilisation factor heat demand calculation method in a cold climate , 2007 .

[9]  Arild Gustavsen,et al.  Developing Low-conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools — State-of-the-Art Review , 2008 .

[10]  Mario Grosso,et al.  Wind Pressure Distribution Around Buildings - a Parametrical Model , 1992 .

[11]  J. H. Klems.  A New Method for Predicting the Solar Heat Gain of Complex Fenestration Systems I. Overview and Derivation of the Matrix Layer Calculation , 1993 .

[12]  José María Sala,et al.  Analysis of different models to estimate energy savings related to windows in residential buildings , 2009 .

[13]  V. Ismet Ugursal,et al.  Effect of window modifications on household energy requirement for heating and cooling in Canada , 2012 .

[14]  Sivert Uvsløkk,et al.  Energy efficient windows with cultural value. Measurements and calculations. Report , 2012 .

[15]  C. Roulet.  prEN-ISO 13790 - A simplified Method to Assess the Annual Heating Energy Use in Buildings , 2002 .

[16]  Elena G. Dascalaki,et al.  Predicting single sided natural ventilation rates in buildings , 1995 .

[17]  Andrew Marsh.  THE APPLICATION OF SHADING MASKS IN BUILDING SIMULATION , 2005 .

[18]  M. Sherman.  INFILTRATION-PRESSURIZATION CORRELATION: SIMPLIFIED PHYSICAL MODELING , 1980 .

[19]  D. Arasteh,et al.  RESFEN: A residential fenestration performance design tool , 1991 .

[20]  Andrea Giovanni Mainini,et al.  Lean Strategies for Window Retrofit of Italian Office Buildings: Impact on Energy Use, Thermal and Visual Comfort , 2015 .

[21]  Svend Svendsen,et al.  Method and simulation program informed decisions in the early stages of building design , 2010 .

[22]  Per Heiselberg,et al.  Single-sided Natural Ventilation Driven by a Combination of Wind Pressure and Temperature Difference: , 2007 .

[23]  J. Michalsky,et al.  Modeling daylight availability and irradiance components from direct and global irradiance , 1990 .

[24]  Christoph F. Reinhart,et al.  DAYLIGHT1-2-3 - A STATE-OF-THE-ART DAYLIGHTING/ENERGY ANALYSIS SOFTWARE FOR INITIAL DESIGN INVESTIGATIONS , 2007 .

[25]  Svend Svendsen,et al.  WinSim: A simple simulation program for evaluating the influence of windows on heating demand and risk of overheating , 1998 .

[26]  Frederick C. Winkelmann,et al.  Modeling Windows in EnergyPlus , 2001 .

[27]  Martin Gough,et al.  Tests performed on ApacheSim in accordance with ANSI/ASHRAE Standard 140-2001 , 2004 .

[28]  Arne Roos,et al.  A simple model for assessing the energy performance of windows , 2001 .

[29]  Von der Fakultät.  Verfahren zur ein- und zweidimensionalen Berechnung des gekoppelten Wärme- und Feuchtetransports in Bauteilen mit einfachen Kennwerten , 1994 .

[30]  Per Heiselberg,et al.  Single-sided natural ventilation driven by wind pressure and temperature difference , 2008 .

[31]  Szymon Firląg,et al.  Control algorithms for dynamic windows for residential buildings , 2015 .

[32]  R. Judkoff,et al.  International Energy Agency building energy simulation test (BESTEST) and diagnostic method , 1995 .

[33]  Paul Torcellini,et al.  Simulation of Energy Management Systems in EnergyPlus , 2008 .