Hydrogen Production and Carbon Formation during the Steam Reformer of Heptane in a Novel Circulating Fluidized Bed Membrane Reformer

Hydrogen production and carbon formation during the steam reforming of heptane over nickel-based catalyst are investigated in a circulating fluidized bed membrane reformer (CFBMR) at 723−823 K and 101.3−2026 kPa. A random carbon deposition and catalyst deactivation model is developed to account for the effect of carbon deposition on the overall reforming kinetics. The results show that the deposited carbon can be efficiently gasified by steam, hydrogen, carbon dioxide, or oxygen in this novel CFBMR, making carbon-free operation practically possible, especially when steam to carbon feed ratio is higher than 2.5 mol/mol. The use of hydrogen permselective membranes breaks the equilibrium barriers associated with the reversible re-forming reactions and increases the hydrogen yield significantly. The introduction of oxygen into the adiabatic reformer can efficiently supply the heat necessary for the endothermic steam reforming through the exothermic oxidation, making an autothermal condition possible for the e...

[1]  Giuseppe Barbieri,et al.  Simulation of the methane steam re-forming process in a catalytic Pd-membrane reactor , 1997 .

[2]  C. H. Bartholomew.  Mechanisms of catalyst deactivation , 2001 .

[3]  Tadeusz Borowiecki,et al.  Effects of small MoO3 additions on the properties of nickel catalysts for the steam reforming of hydrocarbons , 1997 .

[4]  D. L Trimm,et al.  Catalysts for the control of coking during steam reforming , 1999 .

[5]  Said S.E.H. Elnashaie,et al.  Modelling, Simulation and Optimization of Industrial Fixed Bed Catalytic Reactors , 1994 .

[6]  Jens R. Rostrup-Nielsen,et al.  Industrial relevance of coking , 1997 .

[7]  Bernard P. A. Grandjean,et al.  Methane steam reforming in asymmetric Pd- and Pd-Ag/porous SS membrane reactors , 1994 .

[8]  Gilbert F. Froment,et al.  Kinetic Study of the Carbon Filament Formation by Methane Cracking on a Nickel Catalyst , 1997 .

[9]  T. Borowiecki.  Nickel catalysts for steam reforming of hydrocarbons: Direct and indirect factors affecting the coking rate , 1987 .

[10]  Said S.E.H. Elnashaie,et al.  THE COUPLING OF CATALYTIC STEAM REFORMING AND OXIDATIVE REFORMING OF METHANE TO PRODUCE PURE HYDROGEN IN A NOVEL CIRCULATING FAST FLUIDIZATION BED MEMBRANE REFORMER , 2002 .

[11]  Caixia Chen,et al.  Numerical simulation of entrained flow coal gasifiers. Part I: modeling of coal gasification in an entrained flow gasifier , 2000 .

[12]  Kaoru Fujimoto,et al.  Development of highly stable nickel catalyst for methane-steam reaction under low steam to carbon ratio , 1996 .

[13]  John R. Grace,et al.  The fluidized bed membrane reactor system: a pilot scale experimental study , 1994 .

[14]  Thomas Sandahl Christensen,et al.  Adiabatic prereforming of hydrocarbons — an important step in syngas production , 1996 .

[15]  C. Tsai.  Dense perovskite membrane reactors for partial oxidation of methane to syngas , 1997 .

[16]  Wanqin Jin,et al.  Experimental and simulation study on a catalyst packed tubular dense membrane reactor for partial oxidation of methane to syngas , 2000 .

[17]  Octave Levenspiel,et al.  Circulating fluidized-bed reactors , 1997 .

[18]  Dan Luss,et al.  Ceramic membrane reactor for synthesis gas production , 2001 .

[19]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[20]  Said S.E.H. Elnashaie,et al.  Modeling and optimization of a novel membrane reformer for higher hydrocarbons , 2003 .

[21]  Octave Levenspiel,et al.  Entrainment of solids from fluidized beds I. Hold-up of solids in the freeboard II. Operation of fast fluidized beds , 1990 .

[22]  W. Scholz.  Processes for industrial production of hydrogen and associated environmental effects , 1993 .

[23]  U. Olsbye,et al.  An investigation of the coking properties of fixed and fluid bed reactors during methane-to-synthesis gas reactions , 2002 .

[24]  A. Datye,et al.  Sintering of Nickel Steam-Reforming Catalysts on MgAl2O4 Spinel Supports , 2001 .

[25]  D. Do,et al.  A unified theory of coking deactivation in a catalyst pellet , 1987 .

[26]  Jamal Chaouki,et al.  Scaling considerations for circulating fluidized bed risers , 1992 .

[27]  A. M. Adris,et al.  Fluidized-bed steam methane reforming with oxygen input , 1999 .

[28]  Peter B. Tøttrup,et al.  Evaluation of intrinsic steam reforming kinetic parameters from rate measurements on full particle size , 1982 .

[29]  P. B. Tottrup,et al.  Kinetics of decomposition of carbon monoxide on a supported nickel catalyst. [Effects of temperature, water, and hydrogen; competition for methanation] , 1976 .

[30]  J. Rostrup-Nielsen.  Coking on nickel catalysts for steam reforming of hydrocarbons , 1974 .