Effects of PTFE on operational characteristics and diffusible H and O contents of weld metal in underwater wet welding

[1]  A. Bracarense,et al.  The Effect of Polarity and Hydrostatic Pressure on Operational Characteristics of Rutile Electrode in Underwater Welding , 2020, Materials.

[2]  A. M. Moreno,et al.  Formation of TiC by the application of Ti6Al4V machining chips as flux compounds of tubular wires , 2018, Journal of Physics: Conference Series.

[3]  Andrés Mauricio Moreno Uribe,et al.  Influência da Polaridade Sobre a Estabilidade do Processo de Soldagem Subaquática Molhada com Eletrodo Revestido , 2017 .

[4]  D. Fydrych,et al.  Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding , 2017 .

[5]  K. Bang,et al.  Effects of Fluoride in the Flux on Hydrogen Content in Weld Metal and Operating Behavior in FCAW-S , 2017 .

[6]  Jianfeng Wang,et al.  Investigation on dynamic behaviors of bubble evolution in underwater wet flux-cored arc welding , 2017 .

[7]  C. Mcintosh.  Experimental Measurements of Fall Voltages and Droplet Temperature in GMAW , 2017 .

[8]  Z. Deng,et al.  Effects of welding velocity on metal transfer mode and weld morphology in underwater flux-cored wire welding , 2017 .

[9]  Alexandre Queiroz Bracarense,et al.  The influence of PTFE used as basic covered electrode binder on weld metal acicular ferrite formation* , 2016 .

[10]  Paulo Villani Marques,et al.  Algumas equações úteis em soldagem , 2014 .

[11]  Américo Scotti,et al.  Modelo descritivo do fluxo de calor em soldagem a arco visando o conceito de calor imposto efetivo , 2012 .

[12]  Lorenzo Perdomo González,et al.  Perspectiva de uso del poliestireno expandido, como alternativa de impermeabilizante, para electrodos empleados en la soldadura subacuática mojada , 2012 .

[13]  Ivan José de Santana,et al.  Modelagem matemática do processo de soldagem GMAW: transferência por vôo livre , 2011 .

[14]  João Paulo Pereira,et al.  Estudo de alguns parâmetros básicos da soldagem GMAW com transferência por curto-circuito (Evaluation of Basic Parameters of Short-Circuit GMA Welding) , 2011 .

[15]  A. Scotti,et al.  A qualitative model to explain the polarity influence on the fusion rate in the MIG/MAG process , 2010 .

[16]  J. C. Dutra,et al.  The influence of positive polarity time on GTAW AC of aluminium , 2010 .

[17]  K. Bang,et al.  Comparison of the effects of fluorides in rutile-type flux cored wire , 2010 .

[18]  Lorenzo Perdomo González,et al.  Consideraciones termodinámicas entre la formación de poros y la presión hidrostática durante la soldadura subacuatica mojada , 2009 .

[19]  P. Chapelle,et al.  Effects of flux containing fluorides on TIG welding process , 2007 .

[20]  A. Scotti,et al.  A methodology for voltage drop determination in GMA welding: arcs with short-circuiting metal transfer , 2006 .

[21]  L.-E. Stridh,et al.  5 – Flux cored arc welding , 2006 .

[22]  S. Liu,et al.  Hydrogen control in steel weld metal by means of fluoride additions in welding flux , 2000 .

[23]  Stephen Liu,et al.  A Predictive Electrochemical Model for Weld Metal Hydrogen Pickup in Underwater Wet Welds , 1998 .

[24]  Stephen Liu,et al.  Hydrogen content of underwater wet welds deposited by rutile and oxidizing electrodes , 1996 .

[25]  Y. Hirata.  Physics of welding (III) ‐ Melting rate and temperature distribution of electrode wire , 1995 .

[26]  A. Hasui,et al.  The Effect of Pressure on Welding Results and Welding Phenomena in Gravity Arc Welding , 1990 .

[27]  J. H. Kim,et al.  Effect of electrochemical reactions on submerged arc weld metal compositions , 1990 .

[28]  T. Asahina,et al.  A Study on the Metallurgical Properties of Steel Welds with Underwater Gravity Welding , 1983 .

[29]  A. E. Guile,et al.  Arc-electrode phenomena , 1971 .