Shear Cracking of Prestressed Girders with High Strength Concrete

Prestressed concrete (PC) is the predominant material in highway bridge construction. The use of high-strength concrete has gained wide acceptance in the PC industry. The main target in the highway industry is to increase the durability and the life-span of bridges. Cracking of elements is one aspect which affects durability. Recently, nine 7.62 meter long PC I-beams made with different concrete strength were designed according to a simple, semi-empirical equation developed at the University of Houston (UH) (Laskar et al., ACI Journal 107(3): 330–339, 2010). The UH Method is a function of shear span-to-depth ratio (a/d), concrete strength $$ \sqrt {{f}_{c}' } $$, web area $$ b_{w} d $$, and amount of transverse steel. Based on testing these girders, the shear cracking strength of girders with different concrete strength and different shear span-to-depth ratio was investigated and compared to the available approaches in current codes such as ACI 318-11 (2011) and AASHTO LRFD Specifications (2010).

[1]  Arthur H. Nilson,et al.  Spirally Reinforced High-Strength Concrete Columns , 1984 .

[2]  TENSION STIFFENING BEHAVIOR OF HIGH-STRENGTH CONCRETE TENSION MEMBERS , 2011 .

[3]  Adel ElSafty,et al.  Investigation of Likelihood of Cracking in Reinforced Concrete Bridge Decks , 2013 .

[4]  J A Ramirez,et al.  RE-EVALUATION OF THE ULTIMATE STRENGTH AND BEHAVIOR OF HIGH STRENGTH CONCRETE PRESTRESSED I-BEAM SECTIONS. PRODUCTION AND ENGINEERING PROPERTIES OF CONCRETE USED IN PRECAST PRESTRESSED I-BEAMS FOR THE STATE OF INDIANA. VOLUME I. FINAL REPORT , 1988 .

[5]  D. Svecova,et al.  Evaluation of Elastic Modulus for High-Strength Concrete , 2012 .

[6]  Amir Mirmiran,et al.  Proposal for Concrete Compressive Strength up to 18 ksi (124 MPa) for Bridge Design , 2009 .

[7]  P H Kaar,et al.  STRESS-STRAIN CHARACTERISTICS OF HIGH-STRENGTH CONCRETE , 1978 .

[8]  Bryan E. Little,et al.  American Association of State Highway and Transportation Officials. Highway Drainage Guidelines American Association of State Highway and Transportation Officials. LRFD Bridge Design Specifications , 2000 .

[9]  Mohsen A. Shahawy,et al.  Shear behavior of full-scale prestressed concrete girders : Comparison between AASHTO specifications and LRFD code , 1996 .

[10]  T. Hsu,et al.  Shear Strengths of Prestressed Concrete Beams Part 1: Experiments and Shear Design Equations , 2010 .

[11]  A. H. Nilson,et al.  Shear Capacity of Prestressed Concrete Beams Using High-Strength Concrete , 1986 .

[12]  Jack P. Moehle,et al.  "BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-11) AND COMMENTARY" , 2011 .

[13]  B. S. Lynberg.  Ultimate shear resistance of partially prestressed reinforced concrete I-beams : 12F, 4T, 20R. J. AM. CONCR. INST., V73, N4, APR. 1976, P214–222 , 1976 .

[14]  Arthur H. Nilson,et al.  PROPERTIES OF HIGH - STRENGTH CONCRETE SUBJECT TO SHORT - TERM LOADS , 1981 .

[15]  William E. Piper,et al.  Editor's Note 3 , 1999 .

[16]  Ian N. Robertson,et al.  Shear Strength of Prestressed Concrete T Beams With Welded Wire Fabric As Shear , 1987 .

[17]  A. Belarbi,et al.  Constitutive Laws of Softened Concrete in Biaxial Tension Compression , 1995 .

[18]  Aci Committe.  State-of-the-Art Report on High Strength Concrete , 1984 .

[19]  Daniel A. Kuchma,et al.  Application of LRFD Bridge Design Specifications to High-Strength Structural Concrete: Shear Provisions , 2007 .

[20]  Julio A. Ramirez,et al.  Re-Evaluation of the Ultimate Shear Behavior of High-Strength Concrete Prestressed I-Beams , 1988 .