A Numerical Study of Firebrands Scattering in Urban Fire Based on CFD and Firebrands Aerodynamics Measurements

Firebrands are found to be an important factor in the spread of large urban fire. In this study, in order to predict the scattering of firebrands in an urban fire, a computational fluid dynamics (CFD), turbulent combustion model, radiation model, and firebrand scattering model are coupled and it is validated by a fire wind tunnel experiment. The density, terminal velocity, and Stokes diameters of firebrands which are necessary for the firebrand scattering model are measured. The ratio of Stokes diameter to equivalent diameter is focused on 0.2—0.7. An urban fire simulation in a modeled urban area has been conducted using the coupled model and the firebrand experimental data. It is found that when the inflow wind velocity is comparatively slow, the size of the thermal plume becomes significant, and when the inflow wind velocity is high, the thermal plume is suppressed and greatly inclines to the leeward side, which increases the risk of the fire spreading to neighboring buildings. Firebrands can be scattered over 400 m. Firebrands are blown up by the thermal plume and the scattering distances are influenced by the background flow field, the magnitude of thermal plume, and the Stokes diameters of firebrands.

[1]  Ryozo Ooka,et al.  Urban thermal environment measurements and numerical simulation for an actual complex urban area covering a large district heating and cooling system in summer , 2005 .

[2]  Y. Hayashi,et al.  STUDY ON FLAMES AND THERMAL PLUMES INDUCED BY FIRES UNDER WINDY CONDITIONS , 2002 .

[3]  Dalton J. E. Harvie,et al.  A Computational Fluid Dynamics study of wood fire extinguishment by water sprinkler , 1997 .

[4]  Zhenghua Yan,et al.  CFD and experimental studies of room fire growth on wall lining materials , 1996 .

[5]  Behdad Moghtaderi,et al.  Computational fluid dynamics modelling of wood combustion , 1996 .

[6]  M. Fairweather,et al.  Predictions of radiative transfer from a turbulent reacting jet in a cross-wind , 1992 .

[7]  Shuzo Murakami,et al.  Numerical simulation of turbulent flowfield around cubic model current status and applications of model and LES , 1990 .

[8]  S. E. Tahry.  K-epsilon equation for compressible reciprocating engine flows , 1983 .

[9]  Takeyoshi Tanaka,et al.  Transport Of Disk-shaped Firebrands In A Turbulent Boundary Layer , 2005 .

[10]  Yoshihiko Hayashi,et al.  CFD Simulation of Thermal Plume and Firebrands Scattering in Urban Fire , 2004 .

[11]  Y. Hayashi,et al.  NUMERICAL ANALYSIS OF SCATTER OF FIREBRANDS(Fire Safety) , 2003 .

[12]  A. Tewarson.  Generation of Heat and Chemical Compounds in Fires , 2002 .

[13]  Shuzo Murakami,et al.  NUMERICAL ANALYSIS OF SCATTER OF FIRE BRAND WITHIN URBAN FIRE SPREAD , 2001 .

[14]  Mitsuru Arai,et al.  A two-dimensional air quality model in an urban street canyon: evaluation and sensitivity analysis , 2000 .

[15]  Yoshifumi Ohmiya,et al.  AN INVESTIGATION ON THE DISTRIBUTION OF FIRE BRANDS ANDSPOT FIRES DUE TO A HOTEL FIRE , 1999 .

[16]  George T. Tamura,et al.  Smoke movement and control in high-rise buildings , 1994 .

[17]  R. W. Bilger,et al.  Computational Field Models In Fire Research And Engineering , 1994 .

[18]  F. Lockwood,et al.  A new radiation solution method for incorporation in general combustion prediction procedures , 1981 .

[19]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .