Tensile properties and strengthening effects of 6061Al/12 wt%B4C composites reinforced with nano-Al2O3 particles

Abstract Aluminum matrix Boron carbide composites is an important thermal neutron shielding material. In order to prepare 12 wt% B4C/6061Al composite with higher mechanical properties by powder metallurgy method, the new composite reinforced by Nano-Al2O3 particles was fabricated by hot isostatic pressing in the semi-solid temperature range. The tensile properties and strengthening effects of the composite were investigated in this research. The tensile stress-strain curve of the composites was tested by material testing machine, and the microstructure and tensile fracture morphology of composites were analyzed by scanning electron microscopy (SEM) and transmission electron microscopes (TEM). The results indicated that the tensile strength of the composite was greatly improved by the addition of Nano-Al2O3, but the elongation decreased obviously. Nano-Al2O3 particles had seriously affected the microstructure and fracture morphology of the composite and lead to the more obvious brittle fracture characteristics. Strengthening mechanisms of Nano-Al2O3 particles reinforced 6061Al/B4C composite have been discussed, which reveals that grain boundary strengthening mainly plays the most important role.

[1]  Wang Bingzhu,et al.  Effects of reinforcement volume fraction on tensile behaviors of laminated Ti–TiBw/Ti composites , 2014 .

[2]  Wei Wang,et al.  Microstructure and Mechanical Properties of Al6061-31vol.% B4C Composites Prepared by Hot Isostatic Pressing , 2015, Journal of Materials Engineering and Performance.

[3]  C. Yang,et al.  Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB 2 particles , 2018 .

[4]  S. Nutt,et al.  Microstructural investigation on B4C/Al-7093 composite , 2001 .

[5]  Q. Zhang,et al.  A model for predicting the particle size dependence of the low cycle fatigue life in discontinuously reinforced MMCs , 2004 .

[6]  Y. Han,et al.  Galvanic corrosion associated with Al–B4C composites/SS304 and Al–B4C composites/AA6061 couples in NaCl and H3BO3 solutions , 2013 .

[7]  J. Schoenung,et al.  The absence of thermal expansion mismatch strengthening in nanostructured metal―matrix composites , 2009 .

[8]  M. Alizadeh,et al.  Strength prediction of the ARBed Al/Al2O3/B4C nano-composites using Orowan model , 2014 .

[9]  F. Bergner,et al.  Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9%Cr and Fe-14%Cr extruded bars , 2017 .

[10]  Jian Zhou,et al.  Strengthening mechanism of aluminum on elastic properties of NbVTiZr high-entropy alloys , 2018 .

[11]  K. T. Ramesh,et al.  Strengthening mechanisms in cryomilled ultrafine-grained aluminum alloy at quasi-static and dynamic rates of loading , 2009 .

[12]  K. Balasubramanian,et al.  Boron carbide-reinforced alumnium 1100 matrix composites: Fabrication and properties , 2008 .

[13]  David R. Clarke,et al.  The influence of particle size and particle fracture on the elastic/plastic deformation of metal matrix composites , 1996 .

[14]  I. Matsui,et al.  Relationship between grain boundary relaxation strengthening and orientation in electrodeposited bulk nanocrystalline Ni alloys , 2017 .

[15]  X. M. Zhang,et al.  Strengthening mechanisms of graphene sheets in aluminium matrix nanocomposites , 2015 .

[16]  W. Metwally,et al.  The effect of eccentric loading in spent fuel pool criticality safety analyses , 2018 .

[17]  S. Ahmadi,et al.  Neutron irradiation tests on B4C/epoxy composite for neutron shielding application and the parameters assay , 2016 .

[18]  H. Hu,et al.  High temperature mechanical properties of as-extruded TiBw/Ti60 composites with ellipsoid network architecture , 2016 .

[19]  B. C. Pai,et al.  Effect of alumina nanoparticle on strengthening of Al-Si alloy through dendrite refinement, interfacial bonding and dislocation bowing , 2017 .

[20]  Weizhen Zeng,et al.  Suppressing Al2O3 nanoparticle coarsening and Cu nanograin growth of milled nanostructured Cu-5vol.%Al2O3 composite powder particles by doping with Ti , 2017 .

[21]  N. Kumar,et al.  Dry sliding Wear Behavior of Hybrid aluminum Metal Matrix composite reinforced with Boron carbide and graphite particles , 2017 .

[22]  J. Onõro,et al.  High-temperature mechanical properties of aluminium alloys reinforced with boron carbide particles , 2009 .

[23]  E. Lavernia,et al.  Synthesis and mechanical behavior of nanostructured materials via cryomilling , 2006 .

[24]  C. Rhee,et al.  Enhancement in the microstructure and neutron shielding efficiency of sandwich type of 6061Al–B4C composite material via hot isostatic pressing , 2015 .

[25]  Gang Chen,et al.  Compression Mechanical Behaviour of 7075 Aluminium Matrix Composite Reinforced with Nano-sized SiC Particles in Semisolid State , 2016 .

[26]  R. Ansari,et al.  A comprehensive predicting model for thermomechanical properties of particulate metal matrix nanocomposites , 2018 .

[27]  K. Easterling,et al.  On the interaction and pinning of grain boundaries by cubic shaped precipitate particles , 1989 .

[28]  Christopher D. Haines,et al.  Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles , 2011 .

[29]  Yu Cao,et al.  Influence of Ag addition on the microstructure and properties of copper-alumina composites prepared by internal oxidation , 2017 .

[30]  T. Lillo.  Enhancing ductility of AL6061 + 10 wt.% B4C through equal-channel angular extrusion processing , 2005 .

[31]  C. Boehlert,et al.  Assessment of in situ TiB whisker tensile strength and optimization of TiB-reinforced titanium alloy design , 2009 .

[32]  Wang Bingzhu,et al.  Compressive behaviors and mechanisms of TiB whiskers reinforced high temperature Ti60 alloy matrix composites , 2015 .

[33]  L. Jia,et al.  Length effect of carbon nanotubes on the strengthening mechanisms in metal matrix composites , 2017 .

[34]  B. Devincre,et al.  Orowan strengthening at low temperatures in bcc materials studied by dislocation dynamics simulations , 2011 .

[35]  W. X. Wang,et al.  The design, microstructure and tensile properties of B4C particulate reinforced 6061Al neutron absorber composites , 2015 .

[36]  Zhongwu Zhang,et al.  Processing and strengthening mechanisms of boron-carbide-reinforced aluminum matrix composites , 2017 .

[37]  T. V. Arjunan,et al.  Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites – A Review , 2018 .

[38]  Hongmei Zhang,et al.  Investigation on the microstructure, room and high temperature mechanical behaviors and strengthening mechanisms of the (TiB+TiC)/TC4 composites , 2017 .

[39]  Ki-young Kim,et al.  Performance evaluation of METAMIC neutron absorber in spent fuel storage rack , 2018 .

[40]  Dingfei Zhang,et al.  Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases , 2017, Journal of Materials Science & Technology.

[41]  E. Taheri-nassaj,et al.  Preparation and investigation of Al–4 wt % B4C nanocomposite powders using mechanical milling , 2011 .

[42]  D. Gosset,et al.  Mechanical behaviour at high temperature of spark plasma sintered boron carbide ceramics , 2017 .

[43]  S. C. Vettivel,et al.  Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites , 2014 .

[44]  Kyu C. Cho,et al.  Quantification of nitrogen impurity and estimated Orowan strengthening through secondary ion mass spectroscopy in aluminum cryomilled for extended durations , 2015 .

[45]  J. Schoenung,et al.  Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation strengthened Al alloy matrix composites , 2016 .

[46]  J. Hogan,et al.  Damage evolution of hot-pressed boron carbide under confined dynamic compression , 2017 .

[47]  Yumin Zhang,et al.  Constitutive behavior of aluminum alloy in a wide temperature range from warm to semi-solid regions , 2016 .