Modeling of oxygen mass transfer in a gas–liquid airlift reactor

This article focuses on the physical modeling and numerical simulation of mass transfer in two-phase bubbly flow in an airlift internal loop reactor. The objective of this article is to show the ability of computational fluid dynamics (CFD) to correctly simulate mass transfer in such a bubbly reactor. The modeling of two-phase bubbly flow is based on the socalled two-fluid model derived from Reynolds-averaged Navier–Stokes equations in twophase flow. From the hydrodynamic perspective, the flow is steady state. Given the steadystate distributions of phases, interfacial area, and velocity field in the whole volume of the airlift, mass transfer is computed and the evolution of oxygen concentration in the two phases is predicted. Numerical simulations are discussed after comparison to experimental data. The simulations are validated in terms of oxygen concentration in the liquid vs. time. Then, different points are discussed, in particular, the perfectly mixed reactor assumption in the liquid phase and the spatial and temporal heterogeneity of oxygen concentration in the gas arising from oxygen impoverishment in bubbles in the downcomer. This leads to heterogeneity of the transfer driving force between the gas and the liquid. Bubble age or residence time in the airlift loop reactor has been calculated to show the weak renewal of oxygen in bubbles in the downcomer. This discussion generates questions on the estimation of a global mass transfer coefficient from experiments in such a heterogeneous airlift reactor. 2007 American Institute of Chemical Engineers AIChE J, 53: 316–326, 2007

[1]  R. Higbie,et al.  The Rate of Absorption of a Pure Gas into a Still Liquid during Short Periods of Exposure , 1935 .

[2]  Bin Zhao,et al.  Mathematical models for macro-scale mass transfer in airlift loop reactors , 2006 .

[3]  J. Magnaudet,et al.  The structure of the axisymmetric high‐Reynolds number flow around an ellipsoidal bubble of fixed shape , 1995 .

[4]  Y. Chisti,et al.  Comparative evaluation of hydrodynamic and gas—liquid mass transfer characteristics in bubble column and airlift slurry reactors , 1996 .

[5]  M.C.M. van Loosdrecht,et al.  Bubble recirculation regimes in an internal-loop airlift reactor , 1999 .

[6]  Z. Do-Quang,et al.  Computational fluid dynamics applied to water and wastewater treatment facility modeling , 1998 .

[7]  K. H. Choi,et al.  Circulation liquid velocity, gas holdup and volumetric oxygen transfer coefficient in external-loop airlift reactors , 2007 .

[8]  Donald S. Scott,et al.  An eddy cell model of mass transfer into the surface of a turbulent liquid , 1970 .

[9]  Gabriel Wild,et al.  Mass transfer in an external-loop airlift reactor : experiments and modeling , 1997 .

[10]  Z. Do-Quang,et al.  Use of computational fluid dynamics for simulating hydrodynamics and mass transfer in industrial ozonation towers , 1999 .

[11]  Alain Liné,et al.  Modeling hydrodynamics of gas–liquid airlift reactor , 2007 .

[12]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .

[13]  Z. Do-Quang,et al.  Global and local mass transfer coefficients in waste water treatment process by computational fluid dynamics , 2001 .

[14]  D. Darmana,et al.  Detailed modeling of hydrodynamics, mass transfer and chemical reactions in a bubble column using a discrete bubble model , 2005 .