Efficient sizing and optimization of multirotor drones based on scaling laws and similarity models

Abstract In contrast to the current overall aircraft design techniques, the design of multirotor vehicles generally consists of skill-based selection procedures or is based on pure empirical approaches. The application of a systemic approach provides better design performance and the possibility to rapidly assess the effect of changes in the requirements. This paper proposes a generic and efficient sizing methodology for electric multirotor vehicles which allows to optimize a configuration for different missions and requirements. Starting from a set of algebraic equations based on scaling laws and similarity models, the optimization problem representing the sizing can be formulated in many manners. The proposed methodology shows a significant reduction in the number of function evaluations in the optimization process due to a thorough suppression of inequality constraints when compared to initial problem formulation. The results are validated by comparison to characteristics of existing multirotors. In addition, performance predictions of these configurations are performed for different flight scenarios and payloads.

[1]  Volker Bertram.  Chapter 2 – Propellers , 2012 .

[2]  Scott Delbecq,et al.  Knowledge-Based Multidisciplinary Sizing and Optimization of Embedded Mechatronic Systems - Application to Aerospace Electro-Mechanical Actuation Systems , 2018 .

[3]  Nicholas J. Daras.  Applications of mathematics and informatics in science and engineering , 2014 .

[4]  J. De Schutter,et al.  Influence of propeller configuration on propulsion system efficiency of multi-rotor Unmanned Aerial Vehicles , 2016, 2016 International Conference on Unmanned Aircraft Systems (ICUAS).

[5]  Giulio Avanzini,et al.  Optimal performance and sizing of a battery-powered aircraft , 2016 .

[6]  Quan Quan,et al.  A Practical Performance Evaluation Method for Electric Multicopters , 2017, IEEE/ASME Transactions on Mechatronics.

[7]  Douglass J. Wilde,et al.  Monotonicity and Dominance in Optimal Hydraulic Cylinder Design , 1975 .

[8]  Xavier Roboam,et al.  Optimal design of the Integrated Modular Power Electronics Cabinet , 2016 .

[9]  Mark Voskuijl,et al.  Mechatronic Design and Optimization Using Knowledge-Based Engineering Applied to an Inherently Unstable and Unmanned Aerial Vehicle , 2016, IEEE/ASME Transactions on Mechatronics.

[10]  M Budinger,et al.  Estimation models for the preliminary design of electromechanical actuators , 2012 .

[11]  Jean-Charles Maré,et al.  Computer-aided definition of sizing procedures and optimization problems of mechatronic systems , 2015, Concurr. Eng. Res. Appl..

[12]  Cristina Cuerno-Rejado,et al.  Remotely Piloted Aircraft Systems conceptual design methodology based on factor analysis , 2019, Aerospace Science and Technology.

[13]  Jun-Hyuk Choi,et al.  Temperature Estimation of Stator Winding in Permanent Magnet Synchronous Motors Using d-Axis Current Injection , 2018 .

[14]  Antonios Tsourdos,et al.  Sizing of hybrid electric propulsion system for retrofitting a mid-scale aircraft using non-dominated sorting genetic algorithm , 2018 .

[15]  Panos Y. Papalambros,et al.  Optimal Partitioning and Coordination Decisions in Decomposition-Based Design , 2007, DAC 2007.

[16]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[17]  Eric N. Johnson,et al.  Electric Multirotor UAV Propulsion System Sizing for Performance Prediction and Design Optimization , 2016 .

[18]  Marc Budinger,et al.  Scaling laws and similarity models for the preliminary design of multirotor drones , 2020, Aerospace Science and Technology.

[19]  Ohad Gur,et al.  Optimizing Electric Propulsion Systems for Unmanned Aerial Vehicles , 2009 .

[20]  Jasbir S. Arora,et al.  18 – Global Optimization Concepts and Methods for Optimum Design , 2004 .

[21]  C.E.D. Riboldi,et al.  An optimal approach to the preliminary design of small hybrid-electric aircraft , 2018, Aerospace Science and Technology.

[22]  Samir Bouabdallah,et al.  Design and control of quadrotors with application to autonomous flying , 2007 .

[23]  Stephen P. Boyd,et al.  Convex Optimization , 2004, Algorithms and Theory of Computation Handbook.

[24]  Evangelos Papadopoulos,et al.  Parametric design and optimization of multi-rotor aerial vehicles , 2014, ICRA 2014.

[25]  Jean-Charles Maré,et al.  Optimal preliminary design of electromechanical actuators , 2014 .

[26]  Jasbir S. Arora,et al.  Introduction to Optimum Design , 1988 .

[27]  Christina Bloebaum,et al.  Ordering design tasks based on coupling strengths , 1994 .

[28]  P. J. Richards,et al.  Preliminary design of multirotor UAVs with tilted-rotors for improved disturbance rejection capability , 2019, Aerospace Science and Technology.

[29]  Pan Wei,et al.  The Design of Quadcopter Frame Based On Finite Element Analysis , 2015, ICM 2015.

[30]  Marc Budinger.  Preliminary design and sizing of actuation systems , 2014 .

[31]  C. Gogu,et al.  Optimal design of computer experiments for surrogate models with dimensionless variables , 2017 .

[32]  Panos Y. Papalambros,et al.  Principles of Optimal Design: Author Index , 2000 .

[33]  Jérôme Piaton,et al.  A framework for sizing embedded mechatronic systems during preliminary design , 2017 .

[34]  Tong Heng Lee,et al.  Systematic Design and Implementation of a Micro Unmanned Quadrotor System , 2014 .

[35]  Roman Czyba,et al.  Modeling and identification of electric propulsion system for multirotor unmanned aerial vehicle design , 2014, 2014 International Conference on Unmanned Aircraft Systems (ICUAS).

[36]  Marc Budinger,et al.  Dimensional analysis and surrogate models for the thermal modeling of Multiphysics systems , 2017 .

[37]  Hyeonsoo Yeo,et al.  Design and aeromechanics investigation of compound helicopters , 2019, Aerospace Science and Technology.

[38]  Joaquim R. R. A. Martins,et al.  Extensions to the design structure matrix for the description of multidisciplinary design, analysis, and optimization processes , 2012, Structural and Multidisciplinary Optimization.

[39]  Marc Budinger,et al.  Benchmarking of monolithic MDO formulations and derivative computation techniques using OpenMDAO , 2020, Structural and Multidisciplinary Optimization.