A 3/5 GHz reconfigurable CMOS low-noise amplifier integrated with a four-terminal phase-change RF switch

This paper presents the first reported in-situ reconfiguration of a narrowband CMOS low noise amplifier (LNA) over two widely separated frequency bands using a GeTe phase-change (PC) switch. Previous work has demonstrated the attractiveness of CMOS-PC integration to realize high-performance reconfigurable RF front-end circuits [1-2]. Four-terminal PC switches with small form factor have been recently shown to possess close-to-ideal properties of an RF switch: a high OFF/ON resistance ratio and extremely high figure-of-merit for RF switches (FCO = 1/(2πRONCOFF)) [3-4]. In this work, we present a robust realization of a reconfigurable 3/5 GHz LNA designed and fabricated in a 0.13 μm CMOS process and flip-chip integrated with a four-terminal PC switch fabricated using an in-house process.

[1]  J. Paramesh,et al.  A phase-change via-reconfigurable on-chip inductor , 2010, 2010 International Electron Devices Meeting.

[2]  Dongsik Kim,et al.  Thermal Conductivity of AlN and SiC Thin Films , 2006 .

[3]  Cheng-Yuan Wen,et al.  A Phase-Change Via-Reconfigurable CMOS $LC$ VCO , 2013, IEEE Transactions on Electron Devices.

[4]  Robert M. Young,et al.  12.5 THz Fco GeTe Inline Phase-Change Switch Technology for Reconfigurable RF and Switching Applications , 2014, 2014 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS).

[5]  Robert M. Young,et al.  A Four-Terminal, Inline, Chalcogenide Phase-Change RF Switch Using an Independent Resistive Heater for Thermal Actuation , 2013, IEEE Electron Device Letters.