Maximum Thrust Condition by Compliant Joint of a Caudal Fin for Developing a Robotic Fish

Fish generates large thrust through an oscillating motion with a compliant joint of caudal fin. The compliance of caudal fin affects the thrust generated by the fish. Due to the flexibility of the fish, the fish can generate a travelling wave motion which is known to increase the efficiency of the fish. However, a detailed research on the relationship between the flexible joint and the thrust generation is needed. In this paper, the compliant joint of a caudal fin is implemented in the driving mechanism of a robotic fish. By varying the driving frequency and stiffness of the compliant joint, the relationship between the thrust generation and the stiffness of the flexible joint is investigated. In general, as the frequency increases, the thrust increases. When higher driving frequency is applied, higher stiffness of the flexible joint is needed to maximize the thrust. The bending angles between the compliant joint and the caudal fin are compared with the changes of the thrust in one cycle. This result can be used to design the robotic fish which can be operated at the maximum thrust condition using the appropriate stiffness of the compliant joint.

[1]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[2]  George V. Lauder,et al.  Biorobotic fins for investigations of fish locomotion , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Michael Sfakiotakis,et al.  Review of fish swimming modes for aquatic locomotion , 1999 .

[4]  Kyu-Jin Cho,et al.  The effect of compliant joint and caudal fin in thrust generation for robotic fish , 2010, 2010 3rd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[5]  Sheryl M. Grace,et al.  Modeling the dynamics of spring-driven oscillating-foil propulsion , 1998 .

[6]  J. Gray.  Studies in Animal Locomotion: VI. The Propulsive Powers of the Dolphin , 1936 .

[7]  Hirohisa Morikawa,et al.  Experimental Study on Oscillating Wing for Propulsor with Bending Mechanism Modeled on Caudal Muscle-Skeletal Structure of Tuna , 2001 .

[8]  David Scott Barrett,et al.  Propulsive efficiency of a flexible hull underwater vehicle , 1996 .

[9]  Long Wang,et al.  Dolphin-like propulsive mechanism based on an adjustable Scotch yoke , 2009 .

[10]  I-Saac Kang,et al.  Analysis on the Propulsion Force of an Ostraciiform Fish Robot with Elastically Jointed Double Caudal Fins and Effect of Joint Position on the Propulsion Force , 2011 .

[11]  Li Wen,et al.  Development of a two‐joint robotic fish for real‐world exploration , 2011, J. Field Robotics.

[12]  R. Merz,et al.  Shape Deposition Manufacturing , 1994 .

[13]  Mark R. Cutkosky,et al.  Design by Composition for Layered Manufacturing , 2000 .

[14]  J. Gray.  Studies in Animal Locomotion , 1936 .

[15]  Y. Imaizumi,et al.  Propulsion system with flexible/rigid oscillating fin , 1995 .

[16]  Kamal Youcef-Toumi,et al.  Performance of Machines with Flexible Bodies Designed for Biomimetic Locomotion in Liquid Environments , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[17]  Kamal Youcef-Toumi,et al.  Design of Machines With Compliant Bodies for Biomimetic Locomotion in Liquid Environments , 2006 .

[18]  W. Marsden.  I and J , 2012 .

[19]  A. Savitzky,et al.  Smoothing and Differentiation of Data by Simplified Least Squares Procedures. , 1964 .