A Parametric Study of Trailing Edge Flap Implementation on Three Different Airfoils Through an Artificial Neuronal Network

Trailing edge flaps (TEFs) are high-lift devices that generate changes in the lift and drag coefficients of an airfoil. A large number of 2D simulations are performed in this study, in order to measure these changes in aerodynamic coefficients and to analyze them for a given Reynolds number. Three different airfoils, namely NACA 0012, NACA 64(3)-618, and S810, are studied in relation to three combinations of the following parameters: angle of attack, flap angle (deflection), and flaplength. Results are in concordance with the aerodynamic results expected when studying a TEF on an airfoil, showing the effect exerted by the three parameters on both aerodynamic coefficients lift and drag. Depending on whether the airfoil flap is deployed on either the pressure zone or the suction zone, the lift-to-drag ratio, CL/CD, will increase or decrease, respectively. Besides, the use of a larger flap length will increase the higher values and decrease the lower values of the CL/CD ratio. In addition, an artificial neural network (ANN) based prediction model for aerodynamic forces was built through the results obtained from the research.

[1]  Wei Yu,et al.  Effect of Smart Rotor Control Using a Deformable Trailing Edge Flap on Load Reduction under Normal and Extreme Turbulence , 2012 .

[2]  Christian Bak,et al.  A dynamic stall model for airfoils with deformable trailing edges , 2009 .

[3]  Ekaitz Zulueta,et al.  Microtab Design and Implementation on a 5 MW Wind Turbine , 2017 .

[4]  G.A.M. van Kuik,et al.  State of the art and prospectives of smart rotor control for wind turbines , 2007 .

[5]  Walter Musial,et al.  Trends in the Design, Manufacture and Evaluation of Wind Turbine Blades , 2003 .

[6]  G.A.M. van Kuik,et al.  Model predictive control for wind turbines with distributed active flaps: incorporating inflow signals and actuator constraints , 2012 .

[7]  Ekaitz Zulueta Guerrero,et al.  ESTADO DEL ARTE SOBRE DISPOSITIVOS ACTIVOS Y PASIVOS DE CONTROL DE FLUJO PARA TURBINAS EÓLICAS , 2016 .

[8]  Ahmed Abdelrahman,et al.  Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation: Static Flap Angles Case , 2014 .

[9]  Christian Bak,et al.  Potential load reduction using airfoils with variable trailing edge geometry , 2005 .

[10]  Jens Nørkær Sørensen,et al.  Hybrid Immersed Boundary Method for Airfoils with a Trailing-Edge Flap , 2013 .

[11]  Aitor Saenz-Aguirre,et al.  Parametric Study of a Gurney Flap Implementation in a DU91W(2)250 Airfoil , 2019, Energies.

[12]  Scott J. Johnson,et al.  An overview of active load control techniques for wind turbines with an emphasis on microtabs , 2010 .

[13]  Roeland De Breuker,et al.  Fatigue and extreme load reduction of wind turbine components using smart rotors , 2016 .

[14]  L. D. Kral.  Recent experience with different turbulence models applied to the calculation of flow over aircraft components , 1998 .

[15]  G.A.M. van Kuik,et al.  Review of state of the art in smart rotor control research for wind turbines , 2010 .

[16]  Aitor Saenz-Aguirre,et al.  Artificial Neural Network Based Reinforcement Learning for Wind Turbine Yaw Control , 2019, Energies.

[17]  Diangui Huang,et al.  The research on active flow control method with vibration diaphragm on a NACA0012 airfoil at different stalled angles of attack , 2017 .

[18]  Y. Volkan Pehlivanoglu,et al.  Drag minimization using active and passive flow control techniques , 2012 .

[19]  Ronald D. Joslin,et al.  Issues in active flow control: theory, control, simulation, and experiment , 2004 .

[20]  Ibraheem AlQadi,et al.  Dynamics of laminar separation bubble over NACA-0012 airfoil near stall conditions , 2017 .

[21]  Wen Zhong Shen,et al.  Prediction of the wind turbine performance by using BEM with airfoil data extracted from CFD , 2014 .

[22]  Michael I. Friswell,et al.  Aerodynamic optimisation of a camber morphing aerofoil , 2015 .

[23]  E. William Beans,et al.  Method for Estimating the Aerodynamic Coefficients of Wind Turbine Blades at High Angles of Attack , 1983 .

[24]  Ekaitz Zulueta,et al.  Computational characterization of the vortex generated by a Vortex Generator on a flat plate for different vane angles , 2017 .

[25]  Adrian Ilinca,et al.  Aerodynamic performance analysis of slotted airfoils for application to wind turbine blades , 2016 .

[26]  Michel Verhaegen,et al.  On the proof of concept of a ‘Smart’ wind turbine rotor blade for load alleviation , 2008 .

[27]  Load Alleviation on Wind Turbine Blades Using Variable Airfoil Geometry , 2005 .

[28]  T. Lutz,et al.  CFD code comparison for 2D airfoil flows , 2016 .

[29]  Harald E.N. Bersee,et al.  Smart dynamic rotor control using active flaps on a small-scale wind turbine: aeroelastic modeling and comparison with wind tunnel measurements , 2012 .

[30]  Xiao Sun,et al.  Aerodynamic Analysis of Flow-Control Devices for Wind Turbine Applications Based on the Trailing-Edge Slotted-Flap Concept , 2016 .

[31]  Ekaitz Zulueta,et al.  Five Megawatt Wind Turbine Power Output Improvements by Passive Flow Control Devices , 2017 .

[32]  Michel Doquet,et al.  Offshore transmission for wind: comparing the economic benefits of different offshore network configurations , 2016 .

[33]  Y P Ju,et al.  Multi-point robust design optimization of wind turbine airfoil under geometric uncertainty , 2012 .

[34]  Matthew A. Lackner,et al.  A comparison of smart rotor control approaches using trailing edge flaps and individual pitch control , 2009 .

[35]  W. A. Timmer,et al.  Summary of the Delft University Wind Turbine Dedicated Airfoils , 2003 .