Effects of build direction on thermal exposure and creep performance of SLM Ti6Al4V titanium alloy

[1]  T. Lowe,et al.  Fatigue of Laser Powder-Bed Fusion Additive Manufactured Ti-6Al-4V in Presence of Process-Induced Porosity Defects , 2021, Engineering Fracture Mechanics.

[2]  Jutima Simsiriwong,et al.  Fatigue behavior of additive manufactured 316L stainless steel under axial versus rotating-bending loading: Synergistic effects of stress gradient, surface roughness, and volumetric defects , 2021 .

[3]  R. Lancaster,et al.  The effects of thermal exposure on the high temperature behaviour of a Laser Powder Bed Fused nickel based superalloy C263 , 2021, Materials Science and Engineering: A.

[4]  Lanzhang Zhou,et al.  Microstructural evolution and its influence on the impact toughness of GH984G alloy during long-term thermal exposure , 2021 .

[5]  Z. Yang,et al.  Effect of thermal exposure on microstructure and high-temperature fatigue life of Al-Si piston alloys , 2020, Journal of Materials Research and Technology.

[6]  A. Fatemi,et al.  Fatigue life prediction of cast aluminum alloy based on porosity characteristics , 2020 .

[7]  F. Barlat,et al.  A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming , 2020 .

[8]  Padmeya P. Indurkar,et al.  Predicting textural variability effects in the anisotropic plasticity and stability of hexagonal metals: Application to magnesium and its alloys , 2020 .

[9]  P. Withers,et al.  Defect evolution during high temperature tension-tension fatigue of SLM AISi10Mg alloy by synchrotron tomography , 2020, Materials Science and Engineering: A.

[10]  S. Beretta,et al.  Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion , 2020 .

[11]  P. Withers,et al.  A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy , 2020 .

[12]  F. Roters,et al.  Anisotropic polycrystal plasticity due to microstructural heterogeneity: A multi-scale experimental and numerical study on additively manufactured metallic materials , 2020 .

[13]  W. Xiao,et al.  Influences of thermal exposure on the microstructural evolution and subsequent mechanical properties of a near-α high temperature titanium alloy , 2020 .

[14]  Jianrong Liu,et al.  Precipitates and alloying elements distribution in near α titanium alloy Ti65 , 2020 .

[15]  Weihong Zhang,et al.  Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy , 2020 .

[16]  A. Takaichi,et al.  Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting. , 2020, Journal of the mechanical behavior of biomedical materials.

[17]  M. Pletz,et al.  Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites , 2019 .

[18]  Xi Li,et al.  Study on the microstructure and creep behavior of Inconel 718 superalloy fabricated by selective laser melting , 2019, Materials Science and Engineering: A.

[19]  G. Song,et al.  Microstructure and nanoindentation creep behavior of CoCrFeMnNi high-entropy alloy fabricated by selective laser melting , 2019, Additive Manufacturing.

[20]  X. Kong,et al.  Effect of δ-Al3CuNi phase and thermal exposure on microstructure and mechanical properties of Al-Si-Cu-Ni alloys , 2019, Journal of Alloys and Compounds.

[21]  A. Beese,et al.  Anisotropic multiaxial plasticity model for laser powder bed fusion additively manufactured Ti-6Al-4V , 2018, Materials Science and Engineering: A.

[22]  K. Bhattacharya,et al.  A macroscopic strain-space model of anisotropic, cyclic plasticity with hardening , 2018, International Journal of Mechanical Sciences.

[23]  Libo Zhou,et al.  Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting , 2018, Journal of Alloys and Compounds.

[24]  Pei Wei,et al.  Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting , 2018, Progress in Natural Science: Materials International.

[25]  S. Palanisamy,et al.  Effect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy , 2018, Additive Manufacturing.

[26]  Ji-Hun Yu,et al.  Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting , 2018 .

[27]  Shaolin Li,et al.  An improved viscoplastic constitutive model and its application to creep behavior of turbine blade , 2017 .

[28]  U. Ramamurty,et al.  Mechanical behavior of selective laser melted 316L stainless steel , 2017 .

[29]  K. Kakehi,et al.  Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing , 2017 .

[30]  T. L. Yang,et al.  Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting , 2017 .

[31]  Fabrice Pierron,et al.  Application of the virtual fields method to large strain anisotropic plasticity , 2016 .

[32]  T. Niendorf,et al.  Superior creep strength of a nickel-based superalloy produced by selective laser melting , 2016 .

[33]  A. To,et al.  Transversely isotropic hyperelastic-viscoplastic model for glassy polymers with application to additive manufactured photopolymers , 2016 .

[34]  M. L. Nai,et al.  Anisotropic Mechanical Properties in a Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting , 2016 .

[35]  Todd Palmer,et al.  Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing , 2015 .

[36]  B. Van Hooreweder,et al.  Crack propagation and fracture toughness of Ti6Al4V alloy produced by selective laser melting , 2015 .

[37]  C. Tuck,et al.  Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V , 2014 .

[38]  Shan-Tung Tu,et al.  A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction , 2014 .

[39]  Hua-ming Wang,et al.  Effect of thermal exposure on microstructure and tensile properties of laser deposited Ti60A alloy , 2013 .

[40]  Lei Wang,et al.  Effects of thermal exposure on cyclic deformation and fracture behavior of Ti600 titanium alloy , 2012 .

[41]  W. Zeng,et al.  Influence of thermal exposure on the tensile properties and microstructures of Ti60 titanium alloy , 2011 .

[42]  A. Gordon,et al.  An anisotropic tertiary creep damage constitutive model for anisotropic materials , 2011 .

[43]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[44]  C. O. Frederick,et al.  A mathematical representation of the multiaxial Bauschinger effect , 2007 .

[45]  Dong Li,et al.  Preferred precipitation of ordered α2 phase at dislocations and boundaries in near-α titanium alloys , 2003 .

[46]  Sonalisa Ray,et al.  Modeling the anisotropy and creep in orthotropic aluminum–silicon carbide composite rotating disc , 2002 .

[47]  Shan-Tung Tu,et al.  Application of Runge–Kutta–Merson algorithm for creep damage analysis , 2000 .

[48]  C. Ramachandra,et al.  Silicide Precipitation in Alloy Ti-6AI-5Zr-0.5Mo-0.25Si , 1982 .