A rigorous solution for the stability of polyhedral rock blocks

Abstract Block theory has been widely applied to stability analysis of rock engineering due to its clear concept and elegant geometrical theory. For a general block with multiple discontinuity planes, it is assumed that contact is only maintained on a single plane (single-plane sliding) or two intersecting planes (double-plane sliding) in block theory analysis. Since the normal forces and shear resistances acting on the other discontinuity planes are omitted, it can cause unreasonable estimations of block failure modes and incorrect calculation of factors of safety. In this study, a new method is presented that permits to consider the contribution of the normal forces and shear resistances acting on each discontinuity plane to the block stability. The proposed method meets all of the force-equilibrium and moment-equilibrium conditions and provides a rigorous solution for stability of general blocks with any number of faces and any shape. Some typical polyhedral blocks in rock slopes are analyzed using block theory and the proposed method. The results indicate that the traditional block theory may give a misleading conclusion for the predictions of stability and sliding direction of rock blocks when contact occurs on more than two discontinuity planes.

[1]  J. A. Hudson,et al.  A NOVEL AUTOMATIC IDENTIFICATION SYSTEM FOR THREE‐DIMENSIONAL MULTI‐BLOCK SYSTEMS , 1992 .

[2]  Y.-J. Wang,et al.  Wedge Stability Analysis Considering Dilatancy of Discontinuities , 2002 .

[3]  Dawei Zhao,et al.  A fast contact detection algorithm for 3-D discrete element method , 2004 .

[4]  Richard E. Goodman,et al.  Vector Analysis of Keyblock Rotations , 1996 .

[5]  Ömer Aydan,et al.  Dynamic and Static Stability Assessment of Rock Slopes Against Wedge Failures , 2000 .

[6]  Lanru Jing,et al.  Block system construction for three-dimensional discrete element models of fractured rocks , 2000 .

[7]  Jian-Hong Wu,et al.  A new algorithm to identify contact patterns between convex blocks for three-dimensional discontinuous deformation analysis , 2008 .

[8]  Keyblock Stability in Seismically Active Rock Slopes—Snake Path Cliff, Masada , 2003 .

[9]  N. Sitar,et al.  Rock Wedge Stability Analysis Using System Reliability Methods , 2007 .

[10]  Zuyu Chen,et al.  A generalized solution for tetrahedral rock wedge stability analysis , 2004 .

[11]  M. Mauldon,et al.  Stability analysis of rock wedges with multiple sliding surfaces , 1996 .

[12]  Charles Fairhurst,et al.  GEOMETRICAL IDENTIFICATION OF THREE-DIMENSIONAL ROCK BLOCK SYSTEMS USING TOPOLOGICAL TECHNIQUES , 1987 .

[13]  Richard E. Goodman,et al.  Investigations of Blocks in Foundations and Abutments of Concrete Dams , 2003 .

[14]  A. R. Yarahmadi Bafghi,et al.  The probabilistic key‐group method , 2004 .

[15]  Pierre Londe,et al.  Stability of Rock Slopes, A Three-Dimensional Study , 1969 .

[16]  Chuangbing Zhou,et al.  A new method for analyzing the stability of rock wedges , 2013 .

[17]  Herbert H. Einstein,et al.  Approach to complete limit equilibrium analysis for rock wedges — the method of “artificial supports” , 1981 .

[18]  K. W. John.  Graphical Stability Analysis of Slopes in Jointed Rock , 1968 .

[19]  Qinghui Jiang,et al.  Validation of block theory and three-dimensional discontinuous deformation analysis as wedge stability analysis methods , 2003 .

[20]  Marc Elmouttie,et al.  Polyhedral modelling of rock mass structure , 2010 .

[21]  Junxing Wang,et al.  Lower bound limit analysis of wedge stability using block element method , 2017 .

[22]  Richard E. Goodman,et al.  Block theory and its application to rock engineering , 1985 .

[23]  M. Mauldon.  Keyblock probabilities and size distributions: A first model for impersistent 2-D fractures , 1995 .

[24]  C. González-Nicieza,et al.  Analysis of tetrahedral and pentahedral key blocks in underground excavations , 2009 .

[25]  E. Hoek,et al.  Rock slope engineering , 1974 .

[26]  Hong Zheng,et al.  Stability analysis of statically indeterminate blocks in key block theory and application to rock slope in Jinping-I Hydropower Station , 2015 .

[27]  F. Tonon.  Generalization of Mauldon's and Goodman's vector analysis of keyblock rotations , 1998 .

[28]  Hsuan-Teh Hu,et al.  Assessing the impacts of a large slope failure using 3DEC: The Chiu-fen-erh-shan residual slope , 2017 .

[29]  Jun Lu,et al.  Systematic identification of polyhedral rock blocks with arbitrary joints and faults , 2002 .

[30]  F. Tonon,et al.  Validation of General Single Rock Block Stability Analysis , 2008 .

[31]  In Mo Lee,et al.  Stability analysis of tunnel keyblock: a case study , 2000 .

[32]  N. Sitar,et al.  Influence of Stochastic Discontinuity Network Parameters on the Formation of Removable Blocks in Rock Slopes , 2006 .

[33]  Huiming Tang,et al.  Evaluation of rock slope stability for Yujian River dam site by kinematic and block theory analyses , 2011 .

[34]  S. Priest,et al.  Hemispherical Projection Methods in Rock Mechanics , 1985 .