Supported Excavations: Observational Method and Inverse Modeling

An inverse analysis procedure that uses construction monitoring data to update predictions of deformations for supported excavation systems is presented. The numerical procedure is used to optimize the finite element model of a 12.2-m-deep excavation through Chicago glacial clays by minimizing the errors between monitoring data and computed displacements. The field observations are obtained from inclinometer data that measured lateral movements of the soil behind the supporting walls on opposite sides of the excavation throughout construction. Five construction stages are defined for the inverse analysis. At every new construction stage, the inclinometer data relative to that stage are added to the observations already available to “recalibrate” the model of the excavation. The constitutive responses of the soils are represented by the hardening-soil (H-S) model. Of the six basic H-S input parameters, only one parameter per layer is optimized, while the other parameters are either kept constant or related...

[1]  Dan Rosbjerg,et al.  A Comparison of Four Inverse Approaches to Groundwater Flow and Transport Parameter Identification , 1991 .

[2]  G. Wayne Clough,et al.  PREDICTION OF MOVEMENTS FOR BRACED CUTS IN CLAY , 1981 .

[3]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[4]  Chang-Yu Ou,et al.  Shape of ground surface settlement profiles caused by excavation , 1998 .

[5]  Richard J. Finno,et al.  Selecting parameters to optimize in model calibration by inverse analysis , 2004 .

[6]  Chang-Yu Ou,et al.  Soil parameter determination for deep excavation analysis by optimization , 1994 .

[7]  Marc S. Caspe,et al.  SURFACE SETTLEMENT ADJACENT TO BRACED OPEN CUTS , 1966 .

[8]  E. Poeter,et al.  Inverse Models: A Necessary Next Step in Ground‐Water Modeling , 1997 .

[9]  R. Finno,et al.  Influence of depositional processes on the geotechnical parameters of Chicago glacial clays , 1992 .

[10]  Mary C. Hill,et al.  Methods and Guidelines for Effective Model Calibration , 2000 .

[11]  Richard J. Finno,et al.  Modeling Excavations in Urban Areas: Effects of Past Activities , 2003 .

[12]  E. Poeter,et al.  Documentation of UCODE; a computer code for universal inverse modeling , 1998 .

[13]  Richard J. Finno,et al.  Calibration of soil models by inverse analysis , 2002 .

[14]  G. Wayne Clough,et al.  Construction Induced Movements of Insitu Walls , 1990 .

[15]  Richard J. Finno,et al.  Performance of a stiff support system in soft clay , 2002 .

[16]  Robert V. Whitman,et al.  Organizing and evaluating uncertainty in geotechnical engineering , 2000 .

[17]  R. Peck.  Deep excavations and tunnelling in soft ground , 1969 .