An impulse-time perturbation approach for enhancing the robustness of extra-insensitive input shapers

In this paper, perturbation-based extra-insensitive input shapers (PEI-ISs) are proposed to enhance the robustness of the input shaping technique. The extra-insensitive input shaper (EI-IS) has been known to be more robust than the so-called derivative input shapers such as ZVD, ZVDD, and ZVDDD shapers. However, the robustness of the known EI-IS is restricted by the symmetric property in the sensitivity curve. To address this, the PEI-IS is devised by multiplying a series of input shapers in the Laplace domain, of which the impulse times are slightly perturbed from those of the zero vibration (ZV) shaper. For a single-hump case, a closed-form solution to the PEI-IS is provided. For two- and three-hump cases, the approximate solutions are presented. The robustness is evaluated by simulations and assessed by means of the insensitivity. It will be shown that the proposed PEI-IS does improve the robustness and that it can be easily designed.

[1]  Chul-Goo Kang Performance Measure of Residual Vibration Control , 2011 .

[2]  Warren P. Seering,et al.  INPUT SHAPING FOR VIBRATION REDUCTION WITH SPECIFIED INSENSITIVITY TO MODELING ERRORS , 1996 .

[3]  William E. Singhose,et al.  Command-induced vibration analysis using input shaping principles , 2008, Autom..

[4]  William Singhose,et al.  Deflection-Limiting Commands for Systems with Velocity Limits , 2008 .

[5]  Joshua Vaughan,et al.  Control of Tower Cranes With Double-Pendulum Payload Dynamics , 2010, IEEE Transactions on Control Systems Technology.

[6]  Kyung-Soo Kim,et al.  Robust Zero Placement for Motion Control of Lightly Damped Systems , 2013, IEEE Transactions on Industrial Electronics.

[7]  U.-H. Park,et al.  DESIGN AND SENSITIVITY ANALYSIS OF AN INPUT SHAPING FILTER IN THE Z -PLANE , 2001 .

[8]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[9]  Vicente Feliu,et al.  Concurrent Design of Multimode Input Shapers and Link Dynamics for Flexible Manipulators , 2010, IEEE/ASME Transactions on Mechatronics.

[10]  Yasuo Tokita,et al.  On the Vibration Reduction , 1978 .

[11]  Keun-Ho Rew,et al.  A practically efficient method for motion control based on asymmetric velocity profile , 2009 .

[12]  William Singhose,et al.  Vibration Reduction Using Multi-Hump Input Shapers , 1997 .

[13]  Lucy Y. Pao,et al.  Input shaper designs for minimizing the expected level of residual vibration in flexible structures , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[14]  William Singhose,et al.  Performance Measures For Input Shaping and Command Generation , 2006 .

[15]  Vicente Feliú Batlle,et al.  Adaptive input shaping for manoeuvring flexible structures using an algebraic identification technique , 2009, Autom..

[16]  P.H. Meckl,et al.  Optimized s-curve motion profiles for minimum residual vibration , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[17]  Kyung-Soo Kim,et al.  A Closed-Form Solution to Asymmetric Motion Profile Allowing Acceleration Manipulation , 2010, IEEE Transactions on Industrial Electronics.

[18]  William Singhose,et al.  Performance studies of human operators driving double-pendulum bridge cranes , 2010 .

[19]  Warren P. Seering,et al.  Slewing Flexible Spacecraft with Deflection-Limiting Input shaping , 1997 .

[20]  Lucy Y. Pao,et al.  Discrete time-optimal command shaping , 2007, Autom..

[21]  Warren P. Seering,et al.  Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs , 1994 .

[22]  Lucy Y. Pao,et al.  Robust minimum time control of flexible structures , 1998, Autom..