Measurements and modeling to determine the critical temperature for preventing thermal runaway in Li-ion cells

[1]  Guoqing Zhang,et al.  Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system , 2018, Applied Thermal Engineering.

[2]  T. Yokoshima,et al.  Direct observation of internal state of thermal runaway in lithium ion battery during nail-penetration test , 2018, Journal of Power Sources.

[3]  Jean-François Fourmigué,et al.  An innovative practical battery thermal management system based on phase change materials: Numerical and experimental investigations , 2018 .

[4]  Ankur Jain,et al.  Determination of the core temperature of a Li-ion cell during thermal runaway , 2017 .

[5]  Wen Tong Chong,et al.  Computational fluid dynamics simulation on open cell aluminium foams for Li-ion battery cooling system , 2017 .

[6]  Thomas Hanemann,et al.  Preventing Li-ion cell explosion during thermal runaway with reduced pressure , 2017 .

[7]  Zhonghao Rao,et al.  Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface , 2017 .

[8]  Venkatasailanathan Ramadesigan,et al.  State-of-the-art and Future Research Needs for Multiscale Analysis of Li-ion Cells , 2017 .

[9]  Weixiong Wu,et al.  Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system , 2017 .

[10]  Said Al-Hallaj,et al.  Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: An experimental study , 2017 .

[11]  A. Jain,et al.  Non-invasive, transient determination of the core temperature of a heat-generating solid body , 2016, Scientific Reports.

[12]  A. Jain,et al.  Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells , 2016 .

[13]  A. Jain,et al.  Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes , 2016 .

[14]  Weixiong Wu,et al.  An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack , 2016 .

[15]  Guoqing Zhang,et al.  Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins , 2016 .

[16]  Ankur Jain,et al.  Measurement of Multiscale Thermal Transport Phenomena in Li-ion Cells: A Review , 2016 .

[17]  C. Ziebert,et al.  Modeling and Simulation of the Thermal Runaway Behavior of Cylindrical Li-Ion Cells—Computing of Critical Parameters , 2016 .

[18]  Claus Daniel,et al.  Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport , 2015 .

[19]  Ya-Ling He,et al.  Internal cooling of a lithium-ion battery using electrolyte as coolant through microchannels embedded inside the electrodes , 2015 .

[20]  R. McCuen,et al.  Numerical Analysis for Engineers: Methods and Applications, Second Edition , 2015 .

[21]  A. Jain,et al.  Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method , 2014 .

[22]  Jianbo Zhang,et al.  Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries , 2014 .

[23]  David A. Wetz,et al.  Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells , 2014 .

[24]  Donald J. Siegel,et al.  Thermophysical properties of LiFePO4 cathodes with carbonized pitch coatings and organic binders: Experiments and first-principles modeling , 2014 .

[25]  Jeff Dahn,et al.  Building a “smart nail” for penetration tests on Li-ion cells , 2014 .

[26]  John B Goodenough,et al.  The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.

[27]  H. Maleki,et al.  Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells , 2011 .

[28]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[29]  B. Scrosati,et al.  Lithium batteries: Status, prospects and future , 2010 .

[30]  P. Ramadass,et al.  Analysis of internal short-circuit in a lithium ion cell , 2009 .

[31]  Daniel H. Doughty,et al.  Effects of separator breakdown on abuse response of 18650 Li-ion cells , 2007 .

[32]  Mao-Sung Wu,et al.  Correlation between electrochemical characteristics and thermal stability of advanced lithium-ion batteries in abuse tests—short-circuit tests , 2004 .

[33]  D. D. MacNeil,et al.  A comparison of the electrode/electrolyte reaction at elevated temperatures for various Li-ion battery cathodes , 2002 .

[34]  J. Dahn,et al.  Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells , 2001 .

[35]  M. Broussely,et al.  On safety of lithium-ion cells , 1999 .

[36]  J. Dahn,et al.  Accelerating Rate Calorimetry Study on the Thermal Stability of Lithium Intercalated Graphite in Electrolyte. I. Experimental , 1999 .

[37]  Ralph B. Dinwiddie,et al.  Thermal properties of lithium-ion battery and components , 1999 .

[38]  D. Wetz,et al.  Improved Thermal Performance of a Li-Ion Cell through Heat Pipe Insertion , 2017 .

[39]  Lip Huat Saw,et al.  Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packs , 2016 .

[40]  Carlos F. Lopez,et al.  Characterization of Lithium-Ion Battery Thermal Abuse Behavior Using Experimental and Computational Analysis , 2015 .

[41]  Judith Jeevarajan,et al.  Safety of Commercial Lithium-Ion Cells and Batteries , 2014 .

[42]  Viktor Hacker,et al.  Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes , 2014 .

[43]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[44]  R. Spotnitz,et al.  Abuse behavior of high-power, lithium-ion cells , 2003 .

[45]  M. Maeda,et al.  [Heat conduction]. , 1972, Kango kyoshitsu. [Nursing classroom].

[46]  D. A. Frank-Kamenet︠s︡kiĭ.  Diffusion and heat transfer in chemical kinetics , 1969 .