Behavior of stratified sand-silt-gravel composites under seismic liquefaction conditions

Abstract Laboratory seismic liquefaction studies have generally dealt with homogeneous soil conditions only, although stratified soils exist for various soil deposits. The main objective of this research project was to compare the behavior of stratified and homogeneous sand–silt–gravel composites during seismic liquefaction conditions for various silt and gravel contents. An experimental program was undertaken in which a total of eighty stress-controlled undrained cyclic triaxial tests were performed. Two methods of sample preparation were used for each soil type. These methods included moist tamping (representing homogeneous soil conditions) and sedimentation (representing layered soil conditions). The silt contents ranged from 0 to 50%, and soils with 10 and 30% gravel contents were tested. The confining pressure in all test series was 100 kPa. The results indicate that the liquefaction resistances of layered and uniform soils are not significantly different, despite the fact that the soil fabric produced by the two methods of sample preparation is totally different. This finding justifies applying the laboratory tests results to the field conditions for the range of variable studied.