Crack profiles under a Vickers indent in silicon nitride ceramics with various microstructures

[1]  S. Sakaguchi,et al.  Influence of Microstructure and Grain Boundary Phase on Tribological Properties of Si3N4 Ceramics , 2008 .

[2]  R. Dauskardt,et al.  Fracture and Subcritical Crack‐Growth Behavior of Y‐Si‐Al‐O‐N Glasses and Si3N4 Ceramics , 2004 .

[3]  T. Lube.  Indentation crack profiles in silicon nitride , 2001 .

[4]  A. Domínguez-Rodríguez,et al.  Analysis of kidney-shaped indentation cracks in 4Y-PSZ , 1996 .

[5]  S. Kanzaki,et al.  Fracture Resistance Behavior of Highly Anisotropic Silicon Nitride , 1995 .

[6]  Y. Akimune,et al.  Effect of Grain Growth of β‐Silicon Nitride on Strength, Weibull Modulus, and Fracture Toughness , 1993 .

[7]  Takeshi Kawashima,et al.  Grain Size Dependence of the Fracture Toughness of Silicon Nitride Ceramics , 1991 .

[8]  P. Becher.  Microstructural design of toughened ceramics , 1991 .

[9]  Toshimitsu Fujii,et al.  Evaluation of Fracture Toughness for Ceramic Materials by a Single‐Edge‐Precracked‐Beam Method , 1988 .

[10]  R. Shahani,et al.  Crack-profile shapes formed under a Vickers indent pyramid , 1987 .

[11]  A. Evans,et al.  Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System , 1980 .

[12]  R. E. Tressler,et al.  Low‐Temperature Suberitical Crack Growth in SiC and Si3N4 , 1976 .

[13]  Y. Yoshizawa,et al.  Relationship between fracture toughness determined by surface crack in flexure and fracture resistance measured by indentation fracture for silicon nitride ceramics with various microstructures , 2009 .

[14]  K. Hirao,et al.  Comparison of fracture resistance as measured by the indentation fracture method and fracture toughness determined by the single-edge-precracked beam technique using silicon nitrides with different microstructures , 2007 .

[15]  R. Steinbrech.  Toughening mechanisms for ceramic materials , 1992 .

[16]  E. Tani,et al.  Gas-pressure sintering of Si3N4 with concurrent addition of Al2O3 and 5 wt% rare, earth oxide: high fracture toughness Si3N4 with fiber-like structure , 1986 .

[17]  D. Hasselman,et al.  Evaluation ofKIc of brittle solids by the indentation method with low crack-to-indent ratios , 1982 .