Nondestructive testing potential evaluation of a terahertz frequency-modulated continuous-wave imager for composite materials inspection

Abstract. The sub-terahertz (THz) frequency band has proved to be a noteworthy option for nondestructive testing (NDT) of nonmetal aeronautics materials. Composite structures or laminates can be inspected for foreign objects (water or debris), delaminations, debonds, etc., using sub-THz sensors during the manufacturing process or maintenance. Given the harmless radiation to the human body of this frequency band, no special security measures are needed for operation. Moreover, the frequency-modulated continuous-wave sensor used in this study offers a very light, compact, inexpensive, and high-performing solution. An automated two-dimensional scanner carrying three sensors partially covering the 70- to 320-GHz band is operated, using two complementary measurement approaches: conventional focused imaging, where focusing lenses are used; and synthetic aperture (SA) or unfocused wide-beam imaging, for which lenses are no longer needed. Conventional focused imagery offers finer spatial resolutions but imagery is depth-limited due to the beam waist effect, whereas SA measurements allow imaging of thicker samples with depth-independent but coarser spatial resolutions. The present work is a compendium of a much larger study and describes the key technical aspects of the proposed imaging techniques and reports on results obtained from human-made samples (A-sandwich, C-sandwich, solid laminates) which include diverse defects and damages typically encountered in aeronautics multilayered structures. We conclude with a grading of the achieved results in comparison with measurements performed by other NDT techniques on the same samples.

[1]  Torsten Loffler,et al.  3D-terahertz-tomography for material inspection and security , 2009, 2009 34th International Conference on Infrared, Millimeter, and Terahertz Waves.

[2]  Przemyslaw Lopato,et al.  Testing of glass-fiber reinforced composite materials using terahertz technique , 2010 .

[3]  Robert Bogue,et al.  New NDT techniques for new materials and applications , 2012 .

[4]  I. Amenabar,et al.  In Introductory Review to THz Non-Destructive Testing of Composite Mater , 2013 .

[5]  M. Koch,et al.  Terahertz imaging: a new non-destructive technique for the quality control of plastic weld joints , 2007 .

[6]  Christopher D. Stoik,et al.  Nondestructive evaluation of aircraft composites using transmissive terahertz time domain spectroscopy. , 2008, Optics express.

[7]  N. Palka,et al.  Detailed non-destructive evaluation of UHMWPE composites in the terahertz range , 2014 .

[8]  Peter Hoogeboom,et al.  Modified range-Doppler processing for FM-CW synthetic aperture radar , 2006, IEEE Geoscience and Remote Sensing Letters.

[9]  V. Krozer,et al.  THz Active Imaging Systems With Real-Time Capabilities , 2011, IEEE Transactions on Terahertz Science and Technology.

[10]  J. Schur,et al.  Non-destructive testing of glass fibre reinforced plastics with a synthetic aperture radar in the lower THz region , 2012, 2012 37th International Conference on Infrared, Millimeter, and Terahertz Waves.

[11]  Cunlin Zhang,et al.  Compact continuous-wave subterahertz system for inspection applications , 2005 .

[12]  M. Koch,et al.  TERAHERTZ QUALITY CONTROL OF POLYMERIC PRODUCTS , 2007 .

[13]  Rong-Sheng Lu,et al.  A Review of Optical NDT Technologies , 2011, Sensors.

[14]  Ralf D. Geckeler,et al.  Terahertz profilometry at 600 GHz with 0.5 μm depth resolution , 2008 .

[15]  Christopher D. Stoik,et al.  Nondestructive evaluation of aircraft composites using reflective terahertz time domain spectroscopy , 2010 .

[16]  Masayoshi Tonouchi,et al.  Cutting-edge terahertz technology , 2007 .

[17]  Marijke Vandewal,et al.  High-resolution 3D SAR imaging applied to non-destructive testing of multi-layered materials , 2012 .

[18]  M. Skolnik,et al.  Introduction to Radar Systems , 2021, Advances in Adaptive Radar Detection and Range Estimation.

[19]  Ian G. Cumming,et al.  Digital Processing of Synthetic Aperture Radar Data: Algorithms and Implementation , 2005 .

[20]  Tomasz Chady,et al.  Testing of composite materials using advanced NDT methods , 2009 .

[21]  E. Cristofani,et al.  In-depth high-resolution SAR imaging using Omega-k applied to FMCW systems , 2012, 2012 IEEE Radar Conference.

[22]  N. Karpowicz,et al.  Damage and defect inspection with terahertz waves , 2006 .