Amorphization of silicon by femtosecond laser pulses

We have used femtosecond laser pulses to drill submicron holes in single crystal silicon films in silicon-on-insulator structures. Cross-sectional transmission electron microscopy and energy dispersive x-ray analysis of material adjacent to the ablated holes indicates the formation of a layer of amorphous Si. This demonstrates that even when material is ablated using femtosecond pulses near the single pulse ablation threshold, sufficient heating of the surrounding material occurs to create a molten zone which solidifies so rapidly that crystallization is bypassed.

[1]  Xinbing Liu,et al.  Photonic bandpass filter for 1550 nm fabricated by femtosecond direct laser ablation , 2003 .

[2]  Edward T. Knobbe,et al.  Femtosecond study of surface structure and composition and time-resolved spectroscopy in metals , 2003 .

[3]  G. Weatherly,et al.  Transmission and scanning electron microscopy studies of single femtosecond- laser-pulse ablation of silicon , 2003 .

[4]  S. Mao,et al.  Imaging femtosecond laser-induced electronic excitation in glass , 2003 .

[5]  K. Sasaki,et al.  Observation of continuum optical emission from laser-ablation carbon plumes , 2002 .

[6]  Eric Audouard,et al.  Comparison of heat-affected zones due to nanosecond and femtosecond laser pulses using transmission electronic microscopy , 2002 .

[7]  J. McCaffrey,et al.  Surface damage formation during ion-beam thinning of samples for transmission electron microscopy. , 2001, Ultramicroscopy.

[8]  B. Luther-Davies,et al.  Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics , 2001, physics/0102046.

[9]  Klaus Sokolowski-Tinten,et al.  Transient States of Matter during Short Pulse Laser Ablation , 1998 .

[10]  G. Mourou,et al.  Laser ablation and micromachining with ultrashort laser pulses , 1997 .

[11]  P. Simon,et al.  Machining of submicron structures on metals and semiconductors by ultrashort UV-laser pulses , 1996 .

[12]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[13]  Gerard Mourou,et al.  Machining of sub-micron holes using a femtosecond laser at 800 nm , 1995 .

[14]  Michael C. Downer,et al.  Femtosecond imaging of melting and evaporation at a photoexcited silicon surface , 1985 .

[15]  Michael O. Thompson,et al.  Silicon Melt, Regrowth, and Amorphization Velocities During Pulsed Laser Irradiation , 1983 .

[16]  R. Yen,et al.  Picosecond laser‐induced melting and resolidification morphology on Si , 1979 .