3D Modeling for Propagation of UHF-RFID Tags’ Signals in an Indoor Environment

Indoor positioning systems are used to locate people or objects inside buildings. Several technologies are used for this purpose like Infrared, Global Navigation Satellite System (GNSS), Inertial Measurement Unit (IMU), Radio Frequencies, etc. Radio Frequency IDentification (RFID) is one of these technologies. Further, interference, multipath, obstacles lead to a complex spatial propagation of the signal. This paper aims to examine the coverage of RFID tags operating at 433 MHz in two different scenarios. The first one includes a single UHF RFID tag. The second introduces a constellation of tags which is a group of tags placed over a circle. The improvement in (tag-reader) distance error while using constellation is presented. Moreover, the measurement’s procedure characterized the propagation of signals in a complex indoor environment. According to experimental validations, performance of simulations based on the 3D ray-tracing method is obviously illustrated. The measured and simulated data present a good agreement between each other; this encourages the use of the simulated propagation model for indoor localization algorithms.

[1]  C. Oestges,et al.  Directional Spreads of Dense Multipath Components in Indoor Environments: Experimental Validation of a Ray-Tracing Approach , 2012, IEEE Transactions on Antennas and Propagation.

[2]  J. Costa e Silva,et al.  Characterization of coverage of signals in 700 MHz band in indoor environments , 2015, 2015 SBMO/IEEE MTT-S International Microwave and Optoelectronics Conference (IMOC).

[3]  Theodore S. Rappaport,et al.  Site-specific propagation prediction for wireless in-building personal communication system design , 1994 .

[4]  Sergio Fortes Rodriguez,et al.  Enhancing localization accuracy with multi-antenna UHF RFID fingerprinting , 2015, 2015 International Conference on Indoor Positioning and Indoor Navigation (IPIN).

[5]  Kamal Sarabandi,et al.  Wave-propagation management in indoor environments using micro-radio-repeater systems , 2014, IEEE Antennas and Propagation Magazine.

[6]  M. Salazar-Palma,et al.  A survey of various propagation models for mobile communication , 2003 .

[7]  Karoliina Koski,et al.  Electro-textile UHF RFID patch antennas for positioning and localization applications , 2014, 2014 IEEE RFID Technology and Applications Conference (RFID-TA).

[8]  Jae Jin Jeong,et al.  Mathematical formulation of RFID tag floor based localization and performance analysis for tag placement , 2010, 2010 11th International Conference on Control Automation Robotics & Vision.

[9]  Youngbin Chang,et al.  A novel dual-slope mm-Wave channel model based on 3D ray-tracing in urban environments , 2014, 2014 IEEE 25th Annual International Symposium on Personal, Indoor, and Mobile Radio Communication (PIMRC).