Development of three-dimensional inductors using plastic deformation magnetic assembly (PDMA)

On-chip inductors are critical for enabling portable power-efficient wireless communication systems. Existing on-chip spiral inductors based on conventional planar integrated-circuit fabrication technology suffer from substrate loss and parasitics, and have relatively large footprints. In this paper, we discuss the development of two types of on-chip three-dimensional (3-D) inductors-a vertical spiral inductor and a solenoid inductor-by using a 3-D assembly process called plastic deformation magnetic assembly. Prototype vertical spiral inductors and solenoid inductors have been fabricated and tested. Experimental results show that the vertical spiral inductors can achieve better performance and a smaller footprint than the in-plane ones.

[1]  Mona E. Zaghloul,et al.  High Q backside micromachined CMOS inductors , 1999, ISCAS'99. Proceedings of the 1999 IEEE International Symposium on Circuits and Systems VLSI (Cat. No.99CH36349).

[2]  D.J. Young,et al.  Monolithic high-performance three-dimensional coil inductors for wireless communication applications , 1997, International Electron Devices Meeting. IEDM Technical Digest.

[3]  Kow-Ming Chang,et al.  The enhanced Q spiral inductors with MEMS technology for RF applications , 2000, 2000 Asia-Pacific Microwave Conference. Proceedings (Cat. No.00TH8522).

[4]  Jun-Bo Yoon,et al.  High-performance three-dimensional on-chip inductors fabricated by novel micromachining technology for RF MMIC , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[5]  Mark G. Allen,et al.  Surface micromachined solenoid inductors for high frequency applications , 1997 .

[6]  Jun-Bo Yoon,et al.  Surface micromachined solenoid on-Si and on-glass inductors for RF applications , 1999, IEEE Electron Device Letters.

[7]  Mark G. Allen,et al.  Packaging-compatible high Q microinductors and microfilters for wireless applications , 1999, ECTC 1999.

[8]  C. Balanis.  Advanced Engineering Electromagnetics , 1989 .

[9]  V. Lubecke,et al.  Integrated RF MEMS for Single Chip Radio , 2001 .

[10]  Chang Liu,et al.  Development of vertical planar coil inductors using plastic deformation magnetic assembly (PDMA) , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[11]  S. Moinian,et al.  High Q inductors for wireless applications in a complementary silicon bipolar process , 1996 .

[12]  A. Abidi,et al.  Large suspended inductors on silicon and their use in a 2- mu m CMOS RF amplifier , 1993, IEEE Electron Device Letters.

[13]  Jose E. Schutt-Aine,et al.  Plastic deformation magnetic assembly (PDMA) of out-of-plane microstructures: Technology and application , 2001 .

[14]  K. Shenai,et al.  A CMOS monolithic 5-MHz, 5-V, 250-mA, 56% efficiency DC/DC switch-mode boost converter with dynamic PWM for embedded power management , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[15]  N. M. Ibrahim,et al.  Analysis of current crowding effects in multiturn spiral inductors , 2001 .

[16]  E. Beyne,et al.  High-Q integrated spiral inductors for high performance wireless front-end systems , 2000, RAWCON 2000. 2000 IEEE Radio and Wireless Conference (Cat. No.00EX404).

[17]  Josep Samitier,et al.  A physical frequency-dependent compact model for RF integrated inductors , 2002 .

[18]  Liang-Hung Lu,et al.  High-Q X-band and K-band micromachined spiral inductors for use in Si-based integrated circuits , 2000, 2000 Topical Meetings on Silicon Monolithic Integrated Circuits in RF Systems. Digest of Papers (Cat. No.00EX397).

[19]  E. Yeatman,et al.  MEMS high Q microwave inductors using solder surface tension self-assembly , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[20]  J. Long,et al.  The modeling, characterization, and design of monolithic inductors for silicon RF IC's , 1997, IEEE J. Solid State Circuits.

[21]  Bonkee Kim,et al.  Monolithic planar RF inductor and waveguide structures on silicon with performance comparable to those in GaAs MMIC , 1995, Proceedings of International Electron Devices Meeting.

[22]  J. Leclercq,et al.  Micromachined microwave planar spiral inductors and transformers , 2000 .

[23]  Hongrui Jiang,et al.  On-chip spiral inductors suspended over deep copper-lined cavities , 2000 .

[24]  P.L. Chapman,et al.  Optimization issues for fully-integrated CMOS DC-DC converters , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[25]  S. Wong,et al.  Physical modeling of spiral inductors on silicon , 2000 .

[26]  D. Kossives,et al.  Investigation of current crowding effect on spiral inductors , 1997, 1997 IEEE MTT-S Symposium on Technologies for Wireless Applications Digest.

[27]  Chang Liu,et al.  Silicon micromachined sensors and actuators for fluid mechanics applications , 1996 .