Elevated temperature tensile and bending strength of ultra-high temperature ceramic matrix composites obtained by different processes

[1]  Lai-fei Cheng,et al.  Significant improvement of ultra-high temperature oxidation resistance of C/SiC composites upon matrix modification by SiHfBCN ceramics , 2023, Composites Part B: Engineering.

[2]  D. Sciti,et al.  A novel approach for manufacturing of layered, ultra-refractory composites using pliable, short fibre-reinforced ceramic sheets , 2022, Journal of Advanced Ceramics.

[3]  D. Sciti,et al.  Disclosing residual thermal stresses in UHT fibre-reinforced ceramic composites and their effect on mechanical behaviour and damage evolution , 2022, Composites Part B: Engineering.

[4]  D. Sciti,et al.  Processing and characterization of ultra-high temperature ceramic matrix composites via water based slurry impregnation and polymer infiltration and pyrolysis , 2022, Ceramics International.

[5]  D. Sciti,et al.  A systematic approach for horizontal and vertical scale up of sintered Ultra-High Temperature Ceramic Matrix Composites for aerospace – Advances and perspectives , 2022, Composites Part B: Engineering.

[6]  D. Sciti,et al.  Preparation of UHTCMCs by hybrid processes coupling Polymer Infiltration and Pyrolysis with Hot Pressing and vice versa , 2021, Journal of the European Ceramic Society.

[7]  Ke Peng,et al.  Mechanical and ablation properties of a C/C-HfB2-SiC composite prepared by high-solid-loading slurry impregnation combined with precursor infiltration and pyrolysis , 2021 .

[8]  Wei Sun,et al.  Comparative insights into C/C–ZrC–SiC composites with different substrate carbon on microstructures, mechanical properties, and ablation behaviors , 2021 .

[9]  Dongyang Zhang,et al.  Ablation behavior and mechanisms of 3D Cf/ZrB2-SiC composite applied in long-term temperature up to 2400 °C , 2021 .

[10]  S. Kalidindi,et al.  Direct ink writing of ZrB2-SiC chopped fiber ceramic composites , 2021 .

[11]  S. Dong,et al.  Fabrication and properties of C f /Ta 4 HfC 5 ‐SiC composite via precursor infiltration and pyrolysis , 2021, Journal of the American Ceramic Society.

[12]  T. Okabe,et al.  Micromechanical modeling for the in-plane mechanical behavior of orthogonal three-dimensional woven ceramic matrix composites with transverse and matrix cracking , 2021, International Journal of Damage Mechanics.

[13]  J. Ahmad,et al.  A polymer infiltration and pyrolysis (PIP) process model for ceramic matrix composites (CMCs) , 2021, Journal of the American Ceramic Society.

[14]  J. Binner,et al.  Retained strength of UHTCMCs after oxidation at 2278 K , 2021 .

[15]  D. Sciti,et al.  Insight into microstructure and flexural strength of ultra-high temperature ceramics enriched SICARBON™ composite , 2021 .

[16]  Xiaomeng Fan,et al.  Effect of SiC content on the mechanical behaviour of a three-dimensional needled C/SiC composite , 2021 .

[17]  Longbiao Li.  A micromechanical loading/unloading constitutive model of fiber‐reinforced ceramic‐matrix composites considering matrix crack closure , 2021 .

[18]  S. Dong,et al.  Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C , 2021 .

[19]  Lai-fei Cheng,et al.  Damage behavior of atomic oxygen on a hafnium carbide-modified C/SiC composite , 2021 .

[20]  G. Fang,et al.  Study on toughening mechanisms of pyrolytic carbon interface layer in Cf/ZrB2-SiC composites using in-situ tensile experimental and numerical methods , 2021 .

[21]  Yingjun Liu,et al.  Microstructure and mechanical properties of continuous carbon fiber-reinforced ZrB2-based composites via combined electrophoretic deposition and sintering , 2021 .

[22]  D. Sciti,et al.  Properties of large scale ultra-high temperature ceramic matrix composites made by filament winding and spark plasma sintering , 2021, Composites Part B: Engineering.

[23]  Anurag Kamal,et al.  Development of C/SiC Fasteners for High-Temperature Applications , 2021 .

[24]  Xinghong Zhang,et al.  Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration , 2020, Journal of the European Ceramic Society.

[25]  S. Dong,et al.  Long-term ablation behavior and mechanisms of 2D-Cf/ZrB2-SiC composites at temperatures up to 2400 °C , 2020 .

[26]  J. Zou,et al.  Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review , 2019, International Materials Reviews.

[27]  Mehdi Shahedi Asl,et al.  Characterization of ZrB2–TiC composites reinforced with short carbon fibers , 2020 .

[28]  Tianbao Cheng.  Understanding the ultra-high-temperature mechanical behaviors of advanced two-dimensional carbon-carbon composites , 2020 .

[29]  D. Sciti,et al.  Off-axis damage tolerance of fiber-reinforced composites for aerospace systems , 2020 .

[30]  D. Sciti,et al.  Influence of Y2O3 addition on the mechanical and oxidation behaviour of carbon fibre reinforced ZrB2/SiC composites , 2020 .

[31]  A. Mukhopadhyay,et al.  Review on ultra-high temperature boride ceramics , 2020, Progress in Materials Science.

[32]  D. Sciti,et al.  Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs , 2020 .

[33]  Longbiao Li.  Modeling Temperature-Dependent Vibration Damping in C/SiC Fiber-Reinforced Ceramic-Matrix Composites , 2020, Materials.

[34]  D. Fang,et al.  Tensile properties of two-dimensional carbon fiber reinforced silicon carbide composites at temperatures up to 2300 °C , 2020 .

[35]  Hejun Li,et al.  Effects of ZrC/SiC ratios on mechanical and ablation behavior of C/C–ZrC–SiC composites prepared by carbothermal reaction of hydrothermal co-deposited oxides , 2020 .

[36]  D. Fang,et al.  A damage-induced short-circuit diffusion model applied to the oxidation calculation of ceramic matrix composites (CMCs) , 2019 .

[37]  Xinghong Zhang,et al.  Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing , 2019 .

[38]  J. Binner,et al.  Development of a slurry injection technique for continuous fibre ultra-high temperature ceramic matrix composites , 2019, Journal of the European Ceramic Society.

[39]  S. Du,et al.  From ferroconcrete to Cf/UHTC-SiC: A totally novel densification method and mechanism at 1300 °C without pressure , 2019, Composites Part B: Engineering.

[40]  T. Tonnesen,et al.  Evaluation of dynamic modulus measurement for C/C‐SiC composites at different temperatures , 2019, International Journal of Applied Ceramic Technology.

[41]  Y. Kogo,et al.  Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review , 2019, Ceramics International.

[42]  J. Binner,et al.  Materials characterisation and mechanical properties of Cf-UHTC powder composites , 2019, Journal of the European Ceramic Society.

[43]  D. Fang,et al.  Thermal protection system integrating graded insulation materials and multilayer ceramic matrix composite cellular sandwich panels , 2019, Composite structures.

[44]  D. Sciti,et al.  Impact of residual stress on thermal damage accumulation, and Young's modulus of fiber-reinforced ultra-high temperature ceramics , 2018, Materials & Design.

[45]  D. Sciti,et al.  On the thermal shock resistance and mechanical properties of novel unidirectional UHTCMCs for extreme environments , 2018, Scientific Reports.

[46]  Qizhong Huang,et al.  Fabrication and performance of micro-diamond modified C/SiC composites via precursor impregnation and pyrolysis process , 2018, Ceramics International.

[47]  D. Sciti,et al.  Tough salami-inspired C f /ZrB 2 UHTCMCs produced by electrophoretic deposition , 2018 .

[48]  S. Du,et al.  Thermal stress analysis of the FGLCS in hypersonic vehicles: Their application to fuel injection struts in scramjets , 2017 .

[49]  Q. Fu,et al.  Ablation resistance of wedge-shaped C/C-ZrB2-ZrC-SiC composites exposed to an oxyacetylene torch , 2016 .

[50]  W. Krenkel,et al.  Improved microstructure and fracture properties of short carbon fiber-toughened ZrB2-based UHTC composites via colloidal process , 2016 .

[51]  Liping Wang,et al.  Ablation mechanism of C/C–ZrB2–ZrC–SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB2 , 2015 .

[52]  Jacob Fish,et al.  Multi-scale constitutive modeling of Ceramic Matrix Composites by Continuum Damage Mechanics , 2014 .

[53]  Hui‐Ming Cheng,et al.  Ablation and mechanical behavior of a sandwich-structured composite with an inner layer of Cf/SiC between two outer layers of Cf/SiC–ZrB2–ZrC , 2014 .

[54]  Jun Koyanagi,et al.  A Comprehensive Model for Determining Tensile Strengths of Various Unidirectional Composites , 2009 .

[55]  C. Sauder,et al.  Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300–2500 K) , 2008 .

[56]  Yongdong Xu,et al.  Tensile behavior and microstructural evolution of a carbon/silicon carbide composite in simulated re-entry environments , 2008 .

[57]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[58]  J. Yang,et al.  Effects of Thermal Aging on the Mechanical Properties of a Porous‐Matrix Ceramic Composite , 2004 .

[59]  Hermann Hald,et al.  Operational limits for reusable space transportation systems due to physical boundaries of C/SiC materials , 2003 .

[60]  P. Balaguru,et al.  Comparative study of high temperature composites , 2001 .

[61]  Carlos G. Levi,et al.  Effects of Matrix Porosity on the Mechanical Properties of a Porous‐Matrix, All‐Oxide Ceramic Composite , 2001 .

[62]  A. Evans,et al.  Concept for a Damage‐Tolerant Ceramic Composite with “Strong” Interfaces , 1996 .

[63]  A. Evans,et al.  Tensile and flexural ultimate strength of fiber-reinforced ceramic-matrix composites. , 1994 .

[64]  A. Kelly,et al.  Theory of multiple fracture of fibrous composites , 1973 .

[65]  Mehdi Shahedi Asl,et al.  Thermo-mechanical simulation of ultrahigh temperature ceramic composites as alternative materials for gas turbine stator blades , 2021 .

[66]  L. Rueschhoff,et al.  Processing of fiber‐reinforced ultra‐high temperature ceramic composites: A review , 2019 .

[67]  Jingyi Deng,et al.  Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites , 2009 .

[68]  W. Krenkel.  Carbon Fibre Reinforced Silicon Carbide Composites (C/SiC, C/C-SiC) , 2005 .

[69]  C. Sauder,et al.  The tensile behavior of carbon fibers at high temperatures up to 2400 °C , 2004 .

[70]  R. Rice.  Evaluation and extension of physical property-porosity models based on minimum solid area , 1996 .

[71]  P. Steif,et al.  Bend Strength versus Tensile Strength of Fiber‐Reinforced Ceramics , 1994 .