A Mesh-Geometry Based Approach for Mixed-Dimensional Analysis

When conducting a finite element analysis, the total number of degrees of freedom can be dramatically decreased using finite elements such as beams and shells. Because of geometric complexities, entire models (or portions of models) must be meshed using volume elements in order to obtain accurate simulation results. If however some parts of these models fit the description of shells or beams, then a mixed-dimensional model containing shell, beam and volume elements side by side can be used. This approach can significantly reduce the time needed to mesh and solve the system. Unfortunately, problems arise when trying to connect elements of different dimensions in part due to the incompatible degrees of freedom and the independently created meshes. This paper presents a solution to these problems based on the generation of a compatible mesh composed solely of basic elements and without the requirement of constraint equations.

[1]  Jean-Christophe Cuillière,et al.  Generation of a finite element MESH from stereolithography (STL) files , 2002, Comput. Aided Des..

[2]  Cecil G. Armstrong,et al.  Coupling 1D Beams to 3D Bodies , 1998, IMR.

[3]  Cecil G. Armstrong,et al.  Mixed Dimensional Coupling in Finite Element Stress Analysis , 2002, Engineering with Computers.

[4]  Stephen Bridgett,et al.  Dimensional Reduction of Analysis Models , 2006 .

[5]  Jean-Christophe Cuillière.  An adaptive method for the automatic triangulation of 3D parametric surfaces , 1998, Comput. Aided Des..

[6]  Dr. K. R. Suresh.  Generalization of the Kantorovich Method of Dimensional Reduction , 2003 .

[7]  K. Y. Sze,et al.  Hybrid stress tetrahedral elements with Allman's rotational D.O.F.s , 2000 .

[8]  Jean-Christophe Cuillière,et al.  Automatic mesh pre-optimization based on the geometric discretization error , 2000 .

[9]  D. Allman.  A compatible triangular element including vertex rotations for plane elasticity analysis , 1984 .

[10]  Vincent François,et al.  An a Priori Adaptive 3D Advancing Front Mesh Generator Integrated to Solid Modeling , 2003 .

[11]  Cecil Armstrong,et al.  Mixed‐dimensional coupling in finite element models , 2000 .

[12]  A. Senthil Kumar,et al.  Automatic solid decomposition and reduction for non-manifold geometric model generation , 2004, Comput. Aided Des..

[13]  Stefan Gumhold,et al.  Generalization of the Kantorovich Method of Dimensional Reduction , 2003, IMR.

[14]  T. P. Pawlak,et al.  Solid elements with rotational degress of freedom. II Tetrahedron elements , 1991 .

[15]  Jean-Christophe Cuillière,et al.  Automatic and a priori refinement of three-dimensional meshes based on feature recognition techniques , 1999 .