Identification of a pseudo-ternary intermetallic compound in the stirred zone of friction-stir-welded 5083 aluminum alloy with 316L steel

[1]  O. Grydin,et al.  Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet , 2021, Materials.

[2]  Xiangchen Meng,et al.  Interface stability and fracture mechanism of Al/Steel friction stir lap joints by novel designed tool , 2021, Journal of Materials Processing Technology.

[3]  C. Shen,et al.  Formation of Fe5Si3 precipitate in the Fe2Al5 intermetallic layer of the Al/steel dissimilar arc welding joint: A transmission electron microscopy (TEM) study , 2021 .

[4]  J. Robson,et al.  Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution , 2020 .

[5]  Tsutomu Tanaka,et al.  Mechanism of intermetallic compound formation during the dissimilar friction stir welding of aluminum and steel , 2019, Journal of Materials Science.

[6]  P. Russo Spena,et al.  Main Issues in Quality of Friction Stir Welding Joints of Aluminum Alloy and Steel Sheets , 2019, Metals.

[7]  X. Si,et al.  Achieving High-Quality Al/Steel Joint with Ultrastrong Interface , 2018, Metallurgical and Materials Transactions A.

[8]  Clément Keller,et al.  Influence of intermetallic compounds on the electrical resistivity of architectured copper clad aluminum composites elaborated by a restacking drawing method , 2018, Materials & Design.

[9]  E. Hug,et al.  A Correlation between the Ultimate Shear Stress and the Thickness Affected by Intermetallic Compounds in Friction Stir Welding of Dissimilar Aluminum Alloy–Stainless Steel Joints , 2018 .

[10]  R. Kaibyshev,et al.  Hall-Petch relationship for austenitic stainless steels processed by large strain warm rolling , 2017 .

[11]  A. Shan,et al.  Intermetallic Compounds in the Banded Structure and Their Effect on Mechanical Properties of Al/Mg Dissimilar Friction Stir Welding Joints , 2017 .

[12]  Vajinder Singh,et al.  An investigation of microstructural evolution in 304L austenitic stainless steel warm deformed by cyclic channel die compression , 2017 .

[13]  Gunnar Bolmsjö,et al.  Temperature measurements during friction stir welding , 2017 .

[14]  Fei-hu Zhang,et al.  Prediction model of form error influenced by grinding wheel wear in grinding process of large-scale aspheric surface with SiC ceramics , 2017 .

[15]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[16]  A. Heidarzadeh,et al.  Effect of friction stir welding on microstructure and mechanical properties of dissimilar Al 5083-H321 and 316L stainless steel alloy joints , 2016 .

[17]  R. Kaibyshev,et al.  Deformation microstructures and tensile properties of an austenitic stainless steel subjected to multiple warm rolling , 2016 .

[18]  A. Heidarzadeh,et al.  Dissimilar butt friction stir welding of Al 5083-H321 and 316L stainless steel alloys , 2016 .

[19]  J. Ni,et al.  Microstructural evolution during friction stir welding of dissimilar aluminum alloy to advanced high-strength steel , 2016 .

[20]  M. Elyasi,et al.  Analysis of process parameters effects on dissimilar friction stir welding of AA1100 and A441 AISI steel , 2015 .

[21]  Antonino Squillace,et al.  Microstructural aspects in Al–Cu dissimilar joining by FSW , 2015 .

[22]  K. Chung,et al.  Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel , 2015 .

[23]  Yoshiaki Morisada,et al.  Dissimilar FSW of immiscible materials: Steel/magnesium , 2015 .

[24]  Makoto Takahashi,et al.  Formation of interfacial microstructure in a friction stir welded lap joint between aluminium alloy and stainless steel , 2014 .

[25]  T. Pal,et al.  Study on the Formation and Characterization of the Intermetallics in Friction Stir Welding of Aluminum Alloy to Coated Steel Sheet Lap Joint , 2014, Metallurgical and Materials Transactions A.

[26]  R. Kaibyshev,et al.  Strain-induced grain evolution in an austenitic stainless steel under warm multiple forging , 2013 .

[27]  Z. W. Chen,et al.  Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds , 2013, Journal of Materials Science.

[28]  A. Kostka,et al.  Friction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructure , 2012 .

[29]  Jinglong Li,et al.  Joining aluminum to titanium alloy by friction stir lap welding with cutting pin , 2012 .

[30]  J. F. Santos,et al.  Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys , 2011 .

[31]  A. H. Kokabi,et al.  Mechanical and Microstructural Characterization of Al-5083/St-12 lap joints made by friction stir welding , 2011 .

[32]  A. Echeverría,et al.  Material flow and mixing patterns during dissimilar FSW , 2010 .

[33]  G. Grant,et al.  Friction Stir Lap Welding of Magnesium Alloy to Steel: A Preliminary Investigation , 2010 .

[34]  A. Pilchak,et al.  Corrosion behaviour of investment cast and friction stir processed Ti-6Al-4V , 2010 .

[35]  B. Criqui,et al.  Intermetallic compounds in Al 6016/IF-steel friction stir spot welds , 2010 .

[36]  J. Lacaze,et al.  Thermodynamic Assessment of the Aluminum Corner of the Al-Fe-Mn-Si System , 2010 .

[37]  T. Sakai,et al.  Dynamic recrystallization mechanisms operating in a Ni-20%Cr alloy under hot-to-warm working , 2010 .

[38]  J. Lacaze,et al.  Assessment of the Al Corner of the Ternary Al–Fe–Si System , 2010 .

[39]  A. Masoumi,et al.  Experimental investigation of onion ring structure formation in friction stir butt welds of copper plates produced by non-threaded tool pin , 2010 .

[40]  L. D. Filippis,et al.  Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints , 2009 .

[41]  Thaiping Chen,et al.  Process parameters study on FSW joint of dissimilar metals for aluminum–steel , 2009, Journal of Materials Science.

[42]  Honghui Xu,et al.  Phase equilibria of the Al–Fe–Ni system at 850 °C and 627 °C , 2008 .

[43]  J. Schuster,et al.  On the Reaction Scheme and Liquidus Surface in the Ternary System Al-Fe-Si , 2007 .

[44]  K. Frisk,et al.  Assessment of the Fe–Ni–Al system , 2006 .

[45]  Hyuck-Mo Lee,et al.  Effects of Mn on the crystal structure of α-Al(Mn,Fe)Si particles in A356 alloys , 2006 .

[46]  Tracy W. Nelson,et al.  Microstructure evolution during FSW/FSP of high strength aluminum alloys , 2005 .

[47]  Takehiko Watanabe,et al.  Lap Joint of A5083 Aluminum Alloy and SS400 Steel by Friction Stir Welding , 2005 .

[48]  K. Ikeuchi,et al.  Characterization of aluminum/steel lap joint by friction stir welding , 2005 .

[49]  Carla Gambaro,et al.  Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel , 2005 .

[50]  R Kovacevic,et al.  Feasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel , 2004 .

[51]  M. Koçak,et al.  Residual stress in friction stir-welded Al sheets , 2004 .

[52]  I. Hurtado,et al.  Thermodynamic assessment of the quaternary system Al–Fe–Mn–Si in the Al-rich corner , 2003 .

[53]  Rajiv S. Mishra,et al.  Microstructural investigation of friction stir welded 7050-T651 aluminium , 2003 .

[54]  M. Palm,et al.  Assessment of the Al–Fe–Ti system , 2004 .

[55]  K. N. Krishnan,et al.  On the formation of onion rings in friction stir welds , 2002 .

[56]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[57]  L. Murr,et al.  Corrosion of friction-stir welded aluminum alloys 2024 and 2195 , 2000 .

[58]  L. Murr,et al.  Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum , 1999 .

[59]  A. Shan,et al.  A study on composition and crystal structure of dispersoids in AlMgSi alloys , 1999 .

[60]  Zi-kui Liu,et al.  Thermodynamic assessment of the Al-Fe-Si system , 1999 .

[61]  W. Thomas,et al.  Friction stir welding for the transportation industries , 1997 .

[62]  B. Verlinden,et al.  An isothermal section at 550 °C in the Al-Rich corner of the Al-Fe-Mn-Si system , 1996 .

[63]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[64]  P. Donnadieu,et al.  Manganese-induced ordering in the α-(Al-Mn-Fe-Si) approximant phase , 1994 .

[65]  M. Tsuchimori,et al.  Crystal structures of small Al-rich Fe alloy particles formed by a gas-evaporation technique , 1992 .

[66]  Pierre Stadelmann,et al.  EMS-A software package for electron diffraction analysis and HREM image simulation in materials science , 1987 .