Realization and performance evaluation of a machine tool vibration monitoring module by multiple MEMS accelerometer integrations

[1]  T.G. Habetler,et al.  Fault classification and fault signature production for rolling element bearings in electric machines , 2004, IEEE Transactions on Industry Applications.

[2]  Miguel A. Alonso,et al.  A Reliable Turning Process by the Early Use of a Deep Simulation Model at Several Manufacturing Stages , 2017 .

[3]  H. L. Chan,et al.  Vibration-based fault diagnostic platform for rotary machines , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[4]  Junz Jiunn-jyh Wang,et al.  Analytical Prediction of the Critical Depth of Cut and Worst Spindle Speeds for Chatter in End Milling , 2014 .

[5]  Jose Antonio Sanchez,et al.  Simultaneous measurement of forces and machine tool position for diagnostic of machining tests , 2005, IEEE Transactions on Instrumentation and Measurement.

[6]  Jui-Pin Hung,et al.  Analysis of the machining stability of a milling machine considering the effect of machine frame structure and spindle bearings: experimental and finite element approaches , 2013 .

[7]  Guillem Quintana,et al.  Chatter in machining processes: A review , 2011 .

[8]  P. V. Mohanram,et al.  The Effect of Spindle Vibration on Surface Roughness of Workspiece in Dry Turning Using Ann , 2011 .

[9]  Yang Lu,et al.  Industry 4.0: A survey on technologies, applications and open research issues , 2017, J. Ind. Inf. Integr..

[10]  F.A. Levinzon,et al.  Fundamental noise limit of piezoelectric accelerometer , 2004, IEEE Sensors Journal.

[11]  Alex Iglesias,et al.  Optimum Selection of Variable Pitch for Chatter Suppression in Face Milling Operations , 2018, Materials.

[12]  Yun-Hui Liu,et al.  Design of a Novel Sensing Module for Machine Tool Vibration Monitoring by Integrating Multiple MEMS Accelerometers , 2018 .

[13]  Ciro A. Rodríguez,et al.  Determination of the stability lobes in milling operations based on homotopy and simulated annealing techniques , 2014 .

[14]  Kuo-Shen Chen,et al.  Design and control of a cascaded piezoelectric actuated two-degrees-of-freedom positioning compliant stage , 2016 .

[15]  Y. G. Srinivasa,et al.  A back-propagation algorithm applied to tool wear monitoring , 1994 .

[16]  Alan V. Oppenheim,et al.  Discrete-Time Signal Pro-cessing , 1989 .

[17]  Jokin Munoa,et al.  Hybrid Edge–Cloud-Based Smart System for Chatter Suppression in Train Wheel Repair , 2019, Applied Sciences.

[18]  C. Sidney Burrus,et al.  Generalized digital Butterworth filter design , 1998, IEEE Trans. Signal Process..

[19]  George Chryssolouris,et al.  Monitoring and Control of Manufacturing Processes: A Review☆ , 2013 .

[20]  Alaa Abdulhady Jaber,et al.  Design of a Wireless Sensor Node for Vibration Monitoring of Industrial Machinery , 2016 .

[21]  M. Siddhpura,et al.  A review of chatter vibration research in turning , 2012 .

[22]  G. Urbikain,et al.  Stability and vibrational behaviour in turning processes with low rotational speeds , 2015 .

[23]  L. N. López de Lacalle,et al.  Spindle speed variation technique in turning operations: Modeling and real implementation , 2016 .

[24]  L. N. López de Lacalle,et al.  Regenerative vibration avoidance due to tool tangential dynamics in interrupted turning operations , 2014 .

[25]  L. N. López de Lacalle,et al.  Stability lobes for general turning operations with slender tools in the tangential direction , 2013 .

[26]  Kuo-Shen Chen,et al.  Design, Analysis, and Experimental Studies of a Novel PVDF-Based Piezoelectric Energy Harvester With Beating Mechanisms , 2014 .

[27]  Aitor Arnaiz,et al.  Ball bearing damage detection using traditional signal processing algorithms , 2013, IEEE Instrumentation & Measurement Magazine.

[28]  L. N. López de Lacalle,et al.  Prediction Methods and Experimental Techniques for Chatter Avoidance in Turning Systems: A Review , 2019, Applied Sciences.

[29]  L. N. López de Lacalle,et al.  Improved predictions of the stability lobes for milling cutting operations of thin-wall components by considering ultra-miniature accelerometer mass effects , 2016 .

[30]  K. M. Kohlstrand,et al.  Mind the Gap: Using Wireless Sensors to Measure Gaps Efficiently , 2003 .

[31]  Klaus-Dieter Thoben,et al.  "Industrie 4.0" and Smart Manufacturing - A Review of Research Issues and Application Examples , 2017, Int. J. Autom. Technol..

[32]  Sohyung Cho,et al.  achine ensemble approach for simultaneous detection of transient and radual abnormalities in end milling using multisensor fusion , 2009 .