Integration of the Kohonen's self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply composites

The acoustic emission (AE) technique is a useful way for the investigation of local damage in materials. This study deals with the ability of a Kohonen's map to classify recorded AE signals collected during tensile tests on cross-ply glass/epoxy composites in order to monitor the chronology of the damaging process. An unsupervised clustering analysis shows that AE signals are distributed into three clusters. The proposed two-stage procedure is a combination of the Self-Organising Map (SOM) and the k-means methods. In the present work, Kohonen's map is applied as an unsupervised clustering method for the AE signals generated in cross-ply composite specimens during tensile tests. The input vectors of the signal descriptors used in the clustering procedure are calculated from the signal waveforms. The k-means method is then applied on the neurones of the map in order to delimit the clusters and to visualise the topology of the map.

[1]  A. A. Anastassopoulos,et al.  Clustering methodology for the evaluation of acoustic emission from composites , 1995 .

[2]  Michael K. Ng,et al.  A note on constrained k-means algorithms , 2000, Pattern Recognit..

[3]  Haydn N. G. Wadley,et al.  Acoustic Emission: Establishing the Fundamentals. , 1984, Journal of research of the National Bureau of Standards.

[4]  Nikos A. Vlassis,et al.  The global k-means clustering algorithm , 2003, Pattern Recognit..

[5]  A. G. Beattie,et al.  Acoustic emission, principles and instrumentation , 1983 .

[6]  Nathalie Godin,et al.  Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers , 2004 .

[7]  J. A. Brandon,et al.  Classification of acoustic emission signatures using a self-organization neural network , 1999 .

[8]  K. Homma,et al.  Analysis of artificial acoustic emission waveforms using a neural network , 1991 .

[9]  Theodore P. Philippidis,et al.  Unsupervised pattern recognition techniques for the prediction of composite failure , 1999 .

[10]  R. Gaertner,et al.  Use of acoustic emission to identify damage modes in glass fibre reinforced polyester , 2002 .

[11]  Vassilis Kostopoulos,et al.  Failure mechanisms analysis of 2D carbon/carbon using acoustic emission monitoring , 1998 .

[12]  Anil K. Jain,et al.  Artificial neural networks for feature extraction and multivariate data projection , 1995, IEEE Trans. Neural Networks.

[13]  T. Uenoya,et al.  Acoustic emission analysis on interfacial fracture of laminated fabric polymer matrix composites , 1995 .

[14]  K. Ono,et al.  Pattern recognition analysis of acoustic emission signals , 1997 .

[15]  Donald W. Bouldin,et al.  A Cluster Separation Measure , 1979, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[16]  K E Jackson,et al.  Advanced waveform-based acoustic emission detection of matrix cracking in composites , 1995 .

[17]  V. Kostopoulos,et al.  Toughness characterization and acoustic emission monitoring of a 2-D carbon/carbon composite , 2001 .

[18]  Jian Yang,et al.  Classification of mixed acoustic emission signals via neural networks , 1992, Defense, Security, and Sensing.

[19]  A. A. Anastassopoulos,et al.  Damage characterization of carbon/carbon laminates using neural network techniques on AE signals , 1998 .

[20]  M. Benzeggagh,et al.  On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene , 1994 .

[21]  Mikael Johnson.  Waveform based clustering and classification of AE transients in composite laminates using principal component analysis , 2002 .

[22]  Michael E. Fisher,et al.  Neural network burst pressure prediction in fiberglass epoxy pressure vessels using acoustic emission , 1998 .