Comparison of yield strength, ultimate tensile strength and shear strength on the annealed and heat-treated composites of stainless steel with fly ash and ZnO

[1]  Melvin Victor Depoures,et al.  Characterization of Natural Cellulosic Fibers from Stem of Symphirema Involucratum Plant , 2021, Journal of Natural Fibers.

[2]  T. Sathish.  Performance Improvement of Base Fluid Heat Transfer Medium Using Nano Fluid Particles , 2020, Journal of New Materials for Electrochemical Systems.

[3]  Sathish Thanikodi,et al.  Performance and emission characteristics of biodiesel-blend in diesel engine: A review , 2020 .

[4]  V. Mohanavel,et al.  Microstructural and tribological characteristics of AA6351/Si3N4 composites manufactured by stir casting , 2020 .

[5]  B. R. Kumar,et al.  Collective influence of 1-decanol addition, injection pressure and EGR on diesel engine characteristics fueled with diesel/LDPE oil blends , 2020 .

[6]  T. Sathish,et al.  Machining parameters optimization of surface roughness analysis for AA5083 – Boron carbide (B4C) composites , 2020 .

[7]  S. Shalini,et al.  Optimization of stir casting parameters for corrosion rate analysis of AA7068 – Boron carbide composites , 2020 .

[8]  T. Sathish,et al.  Microstructural analysis of Friction stir welded AA 7010 – Titanium Diboride (TiB2) reinforced Composites , 2020 .

[9]  T. Sathish,et al.  Characterization of hybrid Aloe Vera/Bamboo/Palm/Kevlar fibers for better mechanical properties , 2020 .

[10]  V. Dhinakaran,et al.  Experimental study of chemical composition of aluminium alloys , 2020 .

[11]  V. Dhinakaran,et al.  Experimental investigation of hybrid fibre reinforced polymer composite material and its microstructure properties , 2020 .

[12]  T. Sathish,et al.  Microstructural and mechanical properties of copper matrix composites , 2020 .

[13]  A. P. Sathiyagnanam,et al.  Prediction and optimization of engine characteristics of a DI diesel engine fueled with cyclohexanol/diesel blends , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[14]  V. Dhinakaran,et al.  Mechanical properties and microstructural analysis of friction stir processed AA6056-zirconium dioxide (ZrO2) , 2020 .

[15]  A. P. Sathiyagnanam,et al.  Comparative account of the effects of two high carbon alcohols (C5 & C6) on combustion, performance and emission characteristics of a DI diesel engine , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[16]  T. Sathish,et al.  Wear behaviour analysis on aluminium alloy 7050 with reinforced SiC through taguchi approach , 2020 .

[17]  T. Sathish,et al.  Machining parameters optimization of Aluminium Alloy 6063 with reinforcement of SiC composites , 2020 .

[18]  B. Sethuramasamyraja,et al.  Utilization of waste plastic oil in diesel engines: a review , 2019, Reviews in Environmental Science and Bio/Technology.

[19]  T. Sathish.  Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining , 2019, Journal of Materials Research and Technology.

[20]  T. Sathish,et al.  Profit maximization in reverse logistics based on disassembly scheduling using hybrid bee colony and bat optimization , 2019 .

[21]  A. P. Sathiyagnanam,et al.  Performance and emission study of a single cylinder diesel engine fuelled with n-octanol/WPO with some modifications , 2018, International Journal of Ambient Energy.

[22]  B. Sethuramasamyraja,et al.  Using renewable n-octanol in a non-road diesel engine with some modifications , 2018, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[23]  A. P. Sathiyagnanam,et al.  1-Hexanol as a sustainable biofuel in DI diesel engines and its effect on combustion and emissions under the influence of injection timing and exhaust gas recirculation (EGR) , 2017 .

[24]  M. A. M. Shah,et al.  Enhancement of Stainless Steel's Mechanical Properties via Carburizing Process , 2016 .

[25]  T. Sathish,et al.  Investigation of thermal conductivity and thermal resistance analysis on different combination of natural fiber composites of Banana, Pineapple and Jute , 2020 .