Design Optimization of a Spoke-Type Variable Flux Motor Using AlNiCo for Electrified Transportation

This paper presents a design optimization method for a spoke-type variable flux motor for electrified transportation application. The proposed optimization method is comprised of analytical and finite-element-based methods to reduce the magnetization current, torque ripple, and maintain a constant torque value. The optimization objectives and the problem are stated based on the characteristics of an existing variable flux motor. A novel analytical criterion is proposed to select the magnet dimensions based on a desired torque and magnetization current of the variable flux motor. Besides the mentioned objectives, the no-load operating point of the AlNiCo magnets is monitored. Due to the complex relationship between the design objectives, the optimization procedure has two levels. The optimized case is finally compared with the existing variable flux machine.

[1]  Kazuaki Yuki,et al.  Principle of the variable-magnetic-force memory motor , 2009, 2009 International Conference on Electrical Machines and Systems.

[2]  Nicola Bianchi,et al.  Salient-rotor PM synchronous motors for an extended flux-weakening operation range , 2000 .

[3]  Matthew J. Kramer,et al.  Prospects for Non-Rare Earth Permanent Magnets for Traction Motors and Generators , 2012 .

[4]  Lin Yang,et al.  Design Optimization of a Permanent Magnet Motor Derived From a General Magnetization Pattern , 2015, IEEE Transactions on Magnetics.

[5]  Robert D. Lorenz,et al.  Operating within dynamic voltage limits during magnetization state increases in variable flux PM synchronous machines , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[6]  Dan M. Ionel,et al.  Optimal Design of IPM Motors With Different Cooling Systems and Winding Configurations , 2016, IEEE Transactions on Industry Applications.

[7]  Henk Polinder,et al.  Power Density Limits and Design Trends of High-Speed Permanent Magnet Synchronous Machines , 2015, IEEE Transactions on Transportation Electrification.

[8]  Jian-Xin Shen,et al.  Analysis and Improvement of a Hybrid Permanent-Magnet Memory Motor , 2016, IEEE Transactions on Energy Conversion.

[9]  Ronghai Qu,et al.  Rotor design considerations for a variable-flux flux-intensifying interior permanent magnet machine with improved torque quality and reduced magnetization current , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[10]  D. D. Reigosa,et al.  Novel Design of Flux-Intensifying Interior Permanent Magnet Synchronous Machine Suitable for Self-Sensing Control at Very Low Speed and Power Conversion , 2011, IEEE Transactions on Industry Applications.

[11]  Pragasen Pillay,et al.  Control strategy of a variable flux machine using AlNiCo permanent magnets , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[12]  Z. Q. Zhu,et al.  A novel variable flux memory machine with series hybrid magnets , 2016 .

[13]  Simone Ferrari,et al.  Two Design Procedures for PM Synchronous Machines for Electric Powertrains , 2017, IEEE Transactions on Transportation Electrification.

[14]  Robert D. Lorenz,et al.  Rare Earth Reduction Using a Novel Variable Magnetomotive Force Flux-Intensified IPM Machine , 2014 .

[15]  Ali Emadi,et al.  Design and Comparison of Interior Permanent Magnet Motor Topologies for Traction Applications , 2017, IEEE Transactions on Transportation Electrification.

[16]  Robert D. Lorenz,et al.  Design and evaluation of a variable-flux flux-intensifying interior permanent magnet machine , 2012, ECCE 2012.

[17]  M.F. Rahman,et al.  Design and Analysis of an Interior Permanent Magnet (IPM) Machine With Very Wide Constant Power Operation Range , 2008, IEEE Transactions on Energy Conversion.

[18]  Pragasen Pillay,et al.  Design optimization of a new spoke type variable-flux motor using AlNiCo permanent-magnet , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[19]  V. Ostovic,et al.  Memory motors , 2003 .

[20]  Robert D. Lorenz,et al.  Analysis of Magnetizing Trajectories for Variable Flux PM Synchronous Machines Considering Voltage, High-Speed Capability, Torque Ripple, and Time Duration , 2016, IEEE Transactions on Industry Applications.

[21]  Robert D. Lorenz,et al.  Enabling Driving Cycle Loss Reduction in Variable Flux PMSMs Via Closed-Loop Magnetization State Control , 2018, IEEE Transactions on Industry Applications.

[22]  Pragasen Pillay,et al.  An analytical model for a spoke type variable flux permanent magnet motor in no-load condition , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

[23]  Jianguo Zhu,et al.  Techniques for Multilevel Design Optimization of Permanent Magnet Motors , 2015, IEEE Transactions on Energy Conversion.

[24]  Kyung-tae Kim,et al.  Design and Optimization of Neodymium-Free SPOKE-Type Motor With Segmented Wing-Shaped PM , 2014, IEEE Transactions on Magnetics.

[25]  Robert D. Lorenz,et al.  Magnetization state estimation in variable-flux PMSMs , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[26]  Zhi Yang,et al.  Comparative Study of Interior Permanent Magnet, Induction, and Switched Reluctance Motor Drives for EV and HEV Applications , 2015, IEEE Transactions on Transportation Electrification.

[27]  Robert D. Lorenz,et al.  Variable Flux Permanent Magnet Synchronous Machine (VF-PMSM) Design Methodologies to Meet Electric Vehicle Traction Requirements with Reduced Losses , 2017, IEEE Transactions on Industry Applications.

[28]  Pragasen Pillay,et al.  Design of high torque density variable flux permanent magnet machine using Alnico magnets , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).