Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying

[1]  San Ping Jiang,et al.  Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: Advances and challenges , 2012 .

[2]  Tian Lihui,et al.  Microstructure and Electrochemical Behavior of La0.8Sr0.2MnO3 Deposited by Solution Precursor Plasma Spraying , 2011 .

[3]  Young Min Park,et al.  In situ sinterable cathode with nanocrystalline La0.6Sr0.4Co0.2Fe0.8O3−δ for solid oxide fuel cells , 2011 .

[4]  Chang-jiu Li,et al.  Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited by suspension plasma spraying , 2010 .

[5]  S. Chan,et al.  Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte , 2008 .

[6]  Lech Pawlowski,et al.  Finely grained nanometric and submicrometric coatings by thermal spraying: A review , 2008 .

[7]  O. Kesler,et al.  Air plasma spray processing and electrochemical characterization of SOFC composite cathodes , 2008 .

[8]  Hwan Moon,et al.  Development of IT-SOFC unit cells with anode-supported thin electrolytes via tape casting and co-firing , 2008 .

[9]  P. Fauchais,et al.  Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions , 2008 .

[10]  Yaohui Zhang,et al.  Performance evaluation of thin membranes solid oxide fuel cell prepared by pressure-assisted slurry-casting , 2008 .

[11]  Izaak C. Vinke,et al.  Manufacturing of high performance solid oxide fuel cells (SOFCs) with atmospheric plasma spraying (APS) , 2007 .

[12]  Zhenwei Wang,et al.  Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges , 2007 .

[13]  Rudolf Henne,et al.  Solid Oxide Fuel Cells: A Challenge for Plasma Deposition Processes , 2007 .

[14]  Thierry Chartier,et al.  Suspension and solution plasma spraying of finely structured layers: potential application to SOFCs , 2007 .

[15]  Robert Vaßen,et al.  Plasma_sprayed components for SOFC applications , 2006 .

[16]  Thierry Chartier,et al.  Preparation of LaMnO3 perovskite thin films by suspension plasma spraying for SOFC cathodes , 2006 .

[17]  Xiaohua Deng,et al.  Geometrical modeling of the triple-phase-boundary in solid oxide fuel cells , 2005 .

[18]  C. Berndt,et al.  Nanomaterial deposits formed by DC plasma spraying of liquid feedstocks , 2005 .

[19]  Meilin Liu,et al.  Functionally graded cathodes fabricated by sol-gel/slurry coating for honeycomb SOFCs , 2005 .

[20]  Y. Sakurai,et al.  A study of cathode materials for intermediate temperature SOFCs prepared by the sol-gel method , 2004 .

[21]  Zongping Shao,et al.  A high-performance cathode for the next generation of solid-oxide fuel cells , 2004, Nature.

[22]  S. Chan,et al.  Performance evaluation of anode-supported solid oxide fuel cells with thin film YSZ electrolyte , 2004 .

[23]  S. Jiang,et al.  Issues on development of (La,Sr)MnO3 cathode for solid oxide fuel cells , 2003 .

[24]  Akira Ohmori,et al.  Relationships between the microstructure and properties of thermally sprayed deposits , 2002 .

[25]  Meilin Liu,et al.  Sm0.5Sr0.5CoO3 cathodes for low-temperature SOFCs , 2002 .

[26]  E. P. Murray,et al.  (La,Sr)MnO3–(Ce,Gd)O2−x composite cathodes for solid oxide fuel cells , 2001 .

[27]  M. Mogensen,et al.  Effect of sintering temperature on microstructure and performance of LSM–YSZ composite cathodes , 2001 .

[28]  Ellen Ivers-Tiffée,et al.  Modelling and DC-polarisation of a three dimensional electrode/electrolyte interface , 2001 .

[29]  Mogens Bjerg Mogensen,et al.  Physical, chemical and electrochemical properties of pure and doped ceria , 2000 .

[30]  Nigel P. Brandon,et al.  SOFC technology development at Rolls-Royce , 2000 .

[31]  C. Berndt,et al.  Plasma spray synthesis of nanomaterial powders and deposits , 1997 .

[32]  Koichi Yamada,et al.  The relationship between overpotential and the three phase boundary length , 1996 .

[33]  Junichiro Mizusaki,et al.  Reaction Kinetics and Microstructure of the Solid Oxide Fuel Cells Air Electrode La0.6Ca0.4MnO3 / YSZ , 1991 .

[34]  Chang-jiu Li,et al.  Quantitative characterization of the structure of plasma-sprayed Al2O3 coating by using copper electroplating , 1991 .