A typical commercial aircraft trajectory consists of a series of flight segments. An aircraft switches from one segment to another when certain specified variables reach their desired values. Trajectory synthesis for air traffic control automation must be consistent with practical pilot procedures. We examine capture conditions for merging trajectory segments to model commercial aircraft descent in trajectory synthesis. These conditions translate into bounds on measurements of atmospheric wind, pressure, and temperature. They also define ranges of thrust and drag feasible for a descent trajectory. Capture conditions are derived for the Center-TRACON Automation System developed at NASA Ames Research Center for automated air traffic control. Various uses of capture conditions are discussed. A Boeing 727-200 aircraft is used to provide numerical examples of capture conditions.
[1]
R. A. Slattery.
Terminal area trajectory synthesis for air traffic control automation
,
1995,
Proceedings of 1995 American Control Conference - ACC'95.
[2]
Heinz Erzberger,et al.
A time-based concept for terminal-area traffic management
,
1986
.
[3]
Heinz Erzberger,et al.
Design of Center-TRACON Automation System
,
1993
.
[4]
H. Erzberger.
Automation of On-Board Flightpath Management
,
1981
.
[5]
R. A. Slattery,et al.
En-route descent trajectory synthesis for air traffic control automation
,
1995,
Proceedings of 1995 American Control Conference - ACC'95.
[6]
Yiyuan Zhao,et al.
Trajectory Synthesis for Air Traffic Automation
,
1997
.