Experimental evaluation of optimal conically-shaped Dielectric Elastomer linear actuators

A conically shaped Dielectric Elastomer (DE) linear actuator is presented which is obtained by coupling a DE film with a compliant mechanism. The compliant mechanism is designed, by means of a pseudo-rigid-body model, to suitably modify the force generated by the elastomer film. The resulting actuator provides a nearly constant force along the entire actuator stroke when the DE film is activated and returns to an initial rest position when the DE film is deactivated. Experimental activity fully validates the proposed concept. Possible applications of this kind of actuator are Braille cells, light weight robots and haptic devices.

[1]  R. Toupin.  The Elastic Dielectric , 1956 .

[2]  Helmut F. Schlaak,et al.  Novel multilayer electrostatic solid state actuators with elastic dielectric (Invited Paper) , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Huaming Wang,et al.  Implementation and simulation of a cone dielectric elastomer actuator , 2008, International Symposium on Optomechatronic Technologies.

[4]  Gabriele Vassura,et al.  A Compound-Structure Frame for Improving the Performance of a Dielectric Elastomer Actuator , 2008 .

[5]  Steven Dubowsky,et al.  The Calibration of a Parallel Manipulator with Binary Actuation , 2008 .

[6]  S. Tadokoro,et al.  Electroactive Polymers for Robotic Applications: Artificial Muscles and Sensors , 2007 .

[7]  Brent L. Weight.  Development and Design of Constant-Force Mechanisms , 2002 .

[8]  S. Tadokoro,et al.  Electroactive Polymers for Robotic Applications , 2007 .

[9]  Larry L. Howell,et al.  Dimensional Synthesis of Compliant Constant-Force Slider Mechanisms , 1994 .

[10]  John Vogan.  Development of dielectric elastomer actuators for MRI devices , 2004 .

[11]  Steven Dubowsky,et al.  Polymer-based actuators for virtual reality devices , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Larry L. Howell,et al.  Bistable Configurations of Compliant Mechanisms Modeled Using Four Links and Translational Joints , 2004 .

[13]  G. Vassura,et al.  Design of a Single-Acting Constant-Force Actuator Based on Dielectric Elastomers , 2008 .

[14]  Yoseph Bar-Cohen,et al.  Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, Second Edition , 2004 .