Influences of the Thomson Effect on the Performance of a Thermoelectric Generator-Driven Thermoelectric Heat Pump Combined Device

A thermodynamic model of a thermoelectric generator-driven thermoelectric heat pump (TEG-TEH) combined device is established considering the Thomson effect and the temperature dependence of the thermoelectric properties based on non-equilibrium thermodynamics. Energy analysis and exergy analysis are performed. New expressions for heating load, maximum working temperature difference, coefficient of performance (COP), and exergy efficiency are obtained. The performance is analyzed and optimized using numerical calculations. The general performance, optimal performance, optimum variables, optimal performance ranges, and optimum variable ranges are obtained. The results show that the Thomson effect decreases the general performance and optimal performance, and narrows the optimal operating ranges and optimum variable ranges. Considering the Thomson effect, more thermoelectric elements should be allocated to the thermoelectric generator when designing the devices. The optimum design variables for the maximum exergy efficiency are different from those for the maximum COP. The results can provide more scientific guidelines for designing TEG-TEH devices.

[1]  Zijun Yan,et al.  The influence of Thomson effect on the maximum power output and maximum efficiency of a thermoelectric generator , 1996 .

[2]  Osamu Yamashita,et al.  Effect of linear and non-linear components in the temperature dependences of thermoelectric properties on the energy conversion efficiency , 2009 .

[3]  Selahatti̇n Göktun,et al.  Design considerations for a thermoelectric refrigerator , 1995 .

[4]  Fengrui Sun,et al.  Thermodynamic Analysis of TEG-TEC Device Including Influence of Thomson Effect , 2018 .

[5]  S. C. Kaushik,et al.  Performance Optimization of Two-Stage Exoreversible Thermoelectric Converter in Electrically Series and Parallel Configuration , 2015, Journal of Electronic Materials.

[6]  Fengrui Sun,et al.  Thermodynamic analyses and optimization for thermoelectric devices: The state of the arts , 2016 .

[7]  Mortaza Yari,et al.  Development of an exergoeconomic model for analysis and multi-objective optimization of a thermoelectric heat pump , 2016 .

[8]  Tom Gaertner,et al.  Advanced Engineering Thermodynamics , 2016 .

[9]  Fengrui Sun,et al.  Thermodynamic analysis and optimisation of a new-type thermoelectric heat pump driven by a thermoelectric generator , 2009 .

[10]  O. Beeri,et al.  Morphological effects on the thermoelectric properties of Ti0.3Zr0.35Hf0.35Ni1+δSn alloys following phase separation , 2015 .

[11]  Lingen Chen,et al.  Effects of thermocouples’ physical size on the performance of the TEG–TEH system , 2016 .

[12]  Jincan Chen,et al.  Optimum design on the performance parameters of a two-stage combined semiconductor thermoelectric heat pump , 2004 .

[13]  G. Vineyard,et al.  Semiconductor Thermoelements and Thermoelectric Cooling , 1957 .

[14]  Saffa Riffat,et al.  Performance simulation and experimental testing of a novel thermoelectric heat pump system , 2006 .

[15]  William Thomson,et al.  4. On a Mechanical Theory of Thermo-Electric Currents , 1857 .

[16]  Gerard F. Jones,et al.  A review of data center cooling technology, operating conditions and the corresponding low-grade waste heat recovery opportunities , 2014 .

[17]  Miguel Angel Olivares-Robles,et al.  Analysis of a Hybrid Thermoelectric Microcooler: Thomson Heat and Geometric Optimization , 2017, Entropy.

[18]  M. J. Moran,et al.  Exergy Analysis: Principles and Practice , 1994 .

[19]  Fengrui Sun,et al.  Effects of temperature dependence of thermoelectric properties on the power and efficiency of a multielement thermoelectric generator , 2012 .

[20]  S. C. Kaushik,et al.  Performance optimisation of two-stage exoreversible thermoelectric heat pump in electrically series, parallel and isolated configurations , 2016 .

[21]  William Thomson,et al.  I. Account of researches in thermo-electricity , 1856, Proceedings of the Royal Society of London.

[22]  Bourhan Tashtoush,et al.  Modeling and simulation of thermoelectric device working as a heat pump and an electric generator under Mediterranean climate , 2015 .

[23]  Hasbi Yavuz,et al.  The Effect of Joule Losses on The Total Efficiency of A Thermoelectric Power Cycle , 1995 .

[24]  Moshe P. Dariel,et al.  Structural Evolution Following Spinodal Decomposition of the Pseudoternary Compound (Pb0.3Sn0.1Ge0.6)Te , 2010 .

[25]  Lingen Chen,et al.  Exergy analyses of an endoreversible closed regenerative Brayton cycle CCHP plant , 2014 .

[26]  J. Honig,et al.  Thermoelectric and Thermomagnetic Effects and Applications , 1967 .

[27]  Bekir Sami Yilbas,et al.  Configuration of segmented leg for the enhanced performance of segmented thermoelectric generator , 2017 .

[28]  José Carlos Romero,et al.  Exergy as a global energy sustainability indicator. A review of the state of the art , 2014 .

[29]  H. Auracher.  Thermal design and optimization , 1996 .

[30]  Yu Li Lin,et al.  Performance of a thermoelectric generator intensified by temperature oscillation , 2017 .

[31]  W. Yan,et al.  Enhanced Peltier cooling of two-stage thermoelectric cooler via pulse currents , 2017 .

[32]  Fengrui Sun,et al.  Exergy optimisation of irreversible closed Brayton cycle combined cooling, heating and power plant , 2013 .

[33]  Fengrui Sun,et al.  Extreme working temperature differences for thermoelectric refrigerating and heat pumping devices driven by thermoelectric generator , 2010 .

[34]  J. Szargut.  Exergy Method: Technical and Ecological Applications , 2005 .

[35]  Jianlin Yu,et al.  Analysis of optimum configuration of two-stage thermoelectric modules , 2007 .

[36]  L. B. Harris,et al.  A solar thermoelectric refrigerator , 1976 .

[37]  A. J. Mortlock,et al.  Experiments with a Thermoelectric Heat Pump , 1965 .

[38]  D. Astrain,et al.  Thermoelectric generators for waste heat harvesting: A computational and experimental approach , 2017 .

[39]  S. C. Kaushik,et al.  Energy and exergy analysis of an annular thermoelectric cooler , 2015 .

[40]  Fengrui Sun,et al.  Second-law analysis and optimisation for combined Brayton and inverse Brayton cycles , 2007 .

[41]  Christophe Goupil,et al.  Comparison of different modeling approaches for thermoelectric elements , 2013 .

[42]  S. C. Kaushik,et al.  Energy and exergy analysis of thermoelectric heat pump system , 2015 .

[43]  Yaniv Gelbstein,et al.  Functional Graded Germanium–Lead Chalcogenide‐Based Thermoelectric Module for Renewable Energy Applications , 2015 .

[44]  Jincan Chen,et al.  Nonequilibrium thermodynamic analysis of a thermoelectric device , 1997 .

[45]  Sudhanshu Sharma,et al.  Exergy analysis of single‐stage and multi stage thermoelectric cooler , 2014 .

[46]  Kim Choon Ng,et al.  Optimization of two-stage thermoelectric coolers with two design configurations , 2002 .

[47]  Ibrahim Dincer,et al.  Energetic and exergetic performance analyses of a solar energy-based integrated system for multigeneration including thermoelectric generators , 2015 .

[48]  Jianlin Yu,et al.  Optimization of a trapezoid-type two-stage Peltier couples for thermoelectric cooling applications , 2016 .

[49]  S. C. Kaushik,et al.  Thermodynamic analysis of thermoelectric generator including influence of Thomson effect and leg geometry configuration , 2017 .