Free-standing graphene–carbon nanotube hybrid papers used as current collector and binder free anodes for lithium ion batteries

Abstract Free-standing hybrid papers were fabricated by the vacuum-assisted filtration of graphene nanosheets (GNS) and carbon nanotubes (CNTs) both suspended in water, an approach that is environmentally benign. The CNTs are randomly dispersed between the GNS and hence, the hybrid papers exhibit high mechanical strength and flexibility even after being annealed at 800 °C. Electrochemical properties of the hybrid papers are strongly dependent on the CNT/GN ratios. Highest lithium ion storage capacities were obtained in the paper with a CNT/GN ratio of 2:1. The initial reversible specific capacities are ∼375 mAh g −1 at 100 mA g −1 . The capacities remain above 330 mAh g −1 after 100 cycles, which are about 100 mAh g −1 higher than those of the graphene paper with nearly the same mass. The improved capacities were attributed to the contribution of the CNTs, which prevent restacking of the GNS, increase cross-plane electric conductivity of the paper and simultaneously, store Li ions. These results suggest that graphene–CNT hybrid paper has a high potential to be used as collector and binder free anodes for lithium ion batteries.

[1]  S. Dou,et al.  Growth and lithium storage properties of vertically aligned carbon nanotubes , 2006 .

[2]  Yong Wang,et al.  Carbon nanotubes grown in situ on graphene nanosheets as superior anodes for Li-ion batteries. , 2011, Nanoscale.

[3]  Zhixin Chen,et al.  Silicon/Single-Walled Carbon Nanotube Composite Paper as a Flexible Anode Material for Lithium Ion Batteries , 2010 .

[4]  Klaus Müllen,et al.  Towards free-standing graphene/carbon nanotube composite films via acetylene-assisted thermolysis of organocobalt functionalized graphene sheets. , 2010, Chemical communications.

[5]  SonBinh T. Nguyen,et al.  Non-annealed graphene paper as a binder-free anode for lithium-ion batteries , 2010 .

[6]  E. Yoo,et al.  Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. , 2008, Nano letters.

[7]  Wei Lv,et al.  Vertically Aligned Carbon Nanotubes Grown on Graphene Paper as Electrodes in Lithium‐Ion Batteries and Dye‐Sensitized Solar Cells , 2011 .

[8]  R. Li,et al.  Superior cycle stability of nitrogen-doped graphene nanosheets as anodes for lithium ion batteries , 2011 .

[9]  Fei Liu,et al.  Folded Structured Graphene Paper for High Performance Electrode Materials , 2012, Advanced materials.

[10]  C. M. Li,et al.  Assembly of graphene sheets into hierarchical structures for high-performance energy storage. , 2011, ACS nano.

[11]  R. Holze,et al.  Carbon anode materials for lithium ion batteries , 2003 .

[12]  Sundara Ramaprabhu,et al.  Synthesis of graphene-multiwalled carbon nanotubes hybrid nanostructure by strengthened electrostatic interaction and its lithium ion battery application , 2012 .

[13]  Guoxiu Wang,et al.  Chemical-free synthesis of graphene–carbon nanotube hybrid materials for reversible lithium storage in lithium-ion batteries , 2012 .

[14]  Ryne P. Raffaelle,et al.  Carbon nanotubes for lithium ion batteries , 2009 .

[15]  H. Dai,et al.  Mn3O4-graphene hybrid as a high-capacity anode material for lithium ion batteries. , 2010, Journal of the American Chemical Society.

[16]  S. Stankovich,et al.  Preparation and characterization of graphene oxide paper , 2007, Nature.

[17]  Dong-Hwa Seo,et al.  Flexible energy storage devices based on graphene paper , 2011 .

[18]  Klaus Müllen,et al.  Graphene-based nanosheets with a sandwich structure. , 2010, Angewandte Chemie.

[19]  Haihui Wang,et al.  Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries , 2010 .

[20]  Yang-Kook Sun,et al.  High capacity and excellent stability of lithium ion battery anode using interface-controlled binder-free multiwall carbon nanotubes grown on copper. , 2010, ACS nano.

[21]  Harold H. Kung,et al.  Silicon nanoparticles-graphene paper composites for Li ion battery anodes. , 2010, Chemical communications.

[22]  Satoru Suzuki,et al.  Characterization of doped single-wall carbon nanotubes by Raman spectroscopy , 2011 .

[23]  Guangmin Zhou,et al.  Graphene-Wrapped Fe(3)O(4) Anode Material with Improved Reversible Capacity and Cyclic Stability for Lithium Ion Batteries , 2010 .

[24]  B. Simon,et al.  Carbon materials for lithium-ion rechargeable batteries , 1999 .

[25]  G. Fey,et al.  Tin-filled carbon nanotubes as insertion anode materials for lithium-ion batteries , 2004 .

[26]  Xingcheng Xiao,et al.  Free-Standing Layer-By-Layer Hybrid Thin Film of Graphene-MnO2 Nanotube as Anode for Lithium Ion Batteries , 2011 .

[27]  G. Wallace,et al.  Electrochemical Properties of Graphene Paper Electrodes Used in Lithium Batteries , 2009 .

[28]  L. Kavan,et al.  Defects in individual semiconducting single wall carbon nanotubes: Raman spectroscopic and in situ Raman spectroelectrochemical study. , 2010, Nano letters.

[29]  Yi Cui,et al.  Light-weight free-standing carbon nanotube-silicon films for anodes of lithium ion batteries. , 2010, ACS nano.

[30]  Jun Chen,et al.  Single wall carbon nanotube paper as anode for lithium-ion battery , 2005 .

[31]  Yong‐Mook Kang,et al.  Nanostructured SnSb/Carbon Nanotube Composites Synthesized by Reductive Precipitation for Lithium-Ion Batteries , 2007 .

[32]  Xin Zhao,et al.  Flexible holey graphene paper electrodes with enhanced rate capability for energy storage applications. , 2011, ACS nano.