Experiment on trajectory tracking control of high precise positioning system based on iterative learning controller with wavelet filtering

Abstract For the objects with repeated motion characteristics such as Integrated Circuit(IC) packaging, Iterative Learning Control (ILC) offers a good scheme for achieving the control of high precise positioning and fast system response. However, in actual production, the performance is significantly deteriorated because of the unavoidable related disturbances when the learning data of a specific position are transferred to other positions, even in the same leading length motion condition. To improve the trajectory tracking performance of the same leading length operations in total workspace, this study proposes an iterative learning controller with wavelet filtering method to eliminate the dependence of iterative learning feed-forward on the special positions of different trajectory conditions. Through the wavelet analysis of the tracking errors with two different starting points, corresponding wavelet coefficients are obtained separately. Then by means of adjusting the wavelet coefficients, the non-consistent disturbance related to positions are removed, thus a universal feed-forward sequence unrelated to the special position is acquired which can be used for trajectory tracking of the same leading length operations in total workspace. Finally, the effectiveness of the proposed method has been demonstrated with the experimental results of a voice coil motor actuating positioning system.

[1]  Molengraft van de Mjg,et al.  Iterative learning control with wavelet filtering , 2008 .

[2]  R. T. Burton,et al.  Position control of high performance hydrostatic actuation system using a simple adaptive control (SAC) method , 2011 .

[3]  Sulaiman F. Alyaqout,et al.  Combined Robust Design and Robust Control of an Electric DC Motor , 2011 .

[4]  João M. Lemos,et al.  Survey of industrial optimized adaptive control , 2012 .

[5]  Daniel Y. Abramovitch,et al.  Analysis and comparison of three discrete-time feedforward model-inverse control techniques for nonminimum-phase systems☆ , 2012 .

[6]  Hamid D. Taghirad,et al.  Robust PID control of fully-constrained cable driven parallel robots , 2014 .

[7]  J. H. Wu,et al.  Reference adjustment for a high-acceleration and high-precision platform via A-type of iterative learning control , 2007 .

[8]  Fang Lin Luo,et al.  Robust and precision motion control system of linear-motor direct drive for high-speed X-Y table positioning mechanism , 2005, IEEE Transactions on Industrial Electronics.

[9]  N. Chayopitak,et al.  Adaptive Integral Sliding-Mode Position Control of a Coupled-Phase Linear Variable Reluctance Motor for High-Precision Applications , 2012, IEEE Transactions on Industry Applications.

[10]  Kevin L. Moore,et al.  Iterative Learning Control: Brief Survey and Categorization , 2007, IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews).

[11]  Jin Ming Yang,et al.  A Self-Tuning Regulator for the High-Precision Position Control of a Linear Switched Reluctance Motor , 2007, IEEE Transactions on Industrial Electronics.

[12]  Rong-Jong Wai,et al.  Adaptive enhanced fuzzy sliding-mode control for electrical servo drive , 2006, IEEE Trans. Ind. Electron..

[13]  Masayoshi Tomizuka,et al.  Zero Phase Error Tracking Algorithm for Digital Control , 1987 .

[14]  Ying Tan,et al.  Iterative Learning Control With Mixed Constraints for Point-to-Point Tracking , 2013, IEEE Transactions on Control Systems Technology.

[15]  Masayoshi Tomizuka,et al.  Performance enhancement of iterative learning control system using disturbance observer , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.