Management of parallel-manipulator singularities using joint-coupling

Joint-coupling (JC) is introduced in the design and control of parallel manipulators for managing manipulator singularities. The underlying idea consists of coupling the motions of several manipulator joints by driving the joints with a single actuator. This can be done by mechanical or electronic means, while preserving the mobility of the manipulator. Such JC is intended to alter the direct singularity condition of parallel manipulators upon changing the coupling coefficients. Both 2- and 3-d.o.f. planar parallel manipulator examples are provided to illustrate the concept of JC and singularity management. The prototype of a JC device and its associated 2-d.o.f. parallel manipulator intended for a feasibility study is introduced.

[1]  I-Ming Chen,et al.  Rapid response manufacturing through a rapidly recon"gurable robotic workcell , 2001 .

[2]  Curtis L. Collins,et al.  The singularity analysis of an in-parallel hand controller for force-reflected teleoperation , 1995, IEEE Trans. Robotics Autom..

[3]  John T. Wen,et al.  Kinematic control of parallel robots in the presence of unstable singularities , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[4]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[5]  Clément Gosselin,et al.  Singularity loci of planar parallel manipulators with revolute actuators , 1997, Robotics Auton. Syst..

[6]  Ilian A. Bonev.  Singularity loci of planar parallel manipulators with revolute joints , 2001 .

[7]  Jorge Angeles,et al.  On Twist and Wrench Generators and Annihilators , 1994 .

[8]  F. Park,et al.  Singularity Analysis of Closed Kinematic Chains , 1999 .

[9]  Bernard Roth,et al.  In-Parallel Manipulators: A Framework on How to Model Actuation Schemes and a Study of their Effects on Singular Postures , 1999 .

[10]  Manuel S. Pereira,et al.  Computer-Aided Analysis of Rigid and Flexible Mechanical Systems , 1994 .

[11]  Jean-Pierre Merlet.  Singular Configurations of Parallel Manipulators and Grassmann Geometry , 1989, Int. J. Robotics Res..

[12]  H. Lipkin,et al.  Characteristic tetrahedron of wrench singularities for parallel manipulators with three legs , 2002 .

[13]  J. Michael McCarthy,et al.  Conditions for line‐based singularities in spatial platform manipulators , 1998 .

[14]  Guilin Yang,et al.  Kinematic Design of Modular Reconfigurable In-Parallel Robots , 2001, Auton. Robots.

[15]  Leila Notash.  Uncertainty configurations of parallel manipulators , 1998 .

[16]  Zexiang Li,et al.  Singularities of parallel manipulators: a geometric treatment , 2003, IEEE Trans. Robotics Autom..

[17]  Vincent Hayward.  Design of a Hydraulic Robot Shoulder Based on a Combinatorial Mechanism , 1993, ISER.