Dynamic axial crush analysis and design optimization of a square multi-cell thin-walled tube with lateral variable thickness

[1]  Qing Li,et al.  Bending characteristics of top-hat structures through tailor rolled blank (TRB) process , 2018 .

[2]  Jianguang Fang,et al.  Configurational optimization of multi-cell topologies for multiple oblique loads , 2018 .

[3]  Xiaodong Huang,et al.  Topological configuration analysis and design for foam filled multi-cell tubes , 2018 .

[4]  Guangyong Sun,et al.  Energy absorption mechanics for variable thickness thin-walled structures , 2017 .

[5]  Guowei Liu,et al.  Experimental and numerical investigations of a new U-shaped thin plate energy absorber subjected to bending and friction , 2017 .

[6]  Jianguang Fang,et al.  Multi-objective and multi-case reliability-based design optimization for tailor rolled blank (TRB) structures , 2017 .

[7]  Qing Li,et al.  An experimental and numerical study on quasi-static and dynamic crashing behaviors for tailor rolled blank (TRB) structures , 2017 .

[8]  Ning Wang,et al.  Crashworthiness analysis of multi-cell square tubes under axial loads , 2017 .

[9]  Ning Wang,et al.  Impact characteristics and crashworthiness of multi-cell, square, thin-walled, structures under axial loads , 2017 .

[10]  Xueguan Song,et al.  Reliability Based Design Optimization for High-Strength Steel Tailor Welded Thin-Walled Structures under Crashworthiness , 2015 .

[11]  M. Alitavoli,et al.  Experimental and numerical investigation of dynamic plastic behavior of tube with different thickness distribution under axial impact , 2016 .

[12]  Qing Li,et al.  Theoretical, numerical, and experimental study on laterally variable thickness (LVT) multi-cell tubes for crashworthiness , 2016 .

[13]  Qing Li,et al.  On design of multi-cell thin-wall structures for crashworthiness , 2016 .

[14]  Jian Li,et al.  Crashworthiness optimisation of the front-end structure of the lead car of a high-speed train , 2016 .

[15]  Fengxiang Xu.  Enhancing material efficiency of energy absorbers through graded thickness structures , 2015 .

[16]  Xiong Zhang,et al.  Some problems on the axial crushing of multi-cells , 2015 .

[17]  Jianguang Fang,et al.  Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness , 2015 .

[18]  Jianguang Fang,et al.  Crashworthiness design for foam-filled thin-walled structures with functionally lateral graded thickness sheets , 2015 .

[19]  Guangyao Li,et al.  Discrete robust optimization algorithm based on Taguchi method for structural crashworthiness design , 2015, Expert Syst. Appl..

[20]  Xiong Zhang,et al.  Axial crushing and optimal design of square tubes with graded thickness , 2014 .

[21]  Shujuan Hou,et al.  Crashworthiness optimization of new thin-walled cellular configurations , 2014 .

[22]  Qing Li,et al.  Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness , 2014 .

[23]  A. Alavi Nia,et al.  An investigation on the energy absorption characteristics of multi-cell square tubes , 2013 .

[24]  Guangyao Li,et al.  Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models , 2013 .

[25]  Zhiliang Tang,et al.  Energy absorption properties of non-convex multi-corner thin-walled columns , 2012 .

[26]  R. Brereton,et al.  Support vector machines for classification and regression. , 2010, The Analyst.

[27]  Wei Li,et al.  Crashworthiness design for foam filled thin-wall structures , 2009 .

[28]  Alessandro Rizzo,et al.  Kriging metamodel management in the design optimization of a CNG injection system , 2009, Math. Comput. Simul..

[29]  Saeed Ziaei-Rad,et al.  Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings , 2008 .

[30]  P. Pothuraju,et al.  Multidisciplinary design optimization on vehicle tailor rolled blank design , 2008 .

[31]  Masoud Rais-Rohani,et al.  Influence of Cross-Sectional Geometry on Crush Characteristics of Multi-cell Prismatic Columns , 2008 .

[32]  Yan Fu,et al.  Application of Tailor Rolled Blank in Vehicle Front End for Frontal Impact , 2007 .

[33]  Qing Li,et al.  Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria , 2007 .

[34]  G. Gary Wang,et al.  Review of Metamodeling Techniques in Support of Engineering Design Optimization , 2007, DAC 2006.

[35]  G. Cheng,et al.  Theoretical prediction and numerical simulation of multi-cell square thin-walled structures , 2006 .

[36]  Larsgunnar Nilsson,et al.  Evaluation of response surface methodologies used in crashworthiness optimization , 2006 .

[37]  T. Simpson,et al.  Analysis of support vector regression for approximation of complex engineering analyses , 2005, DAC 2003.

[38]  O. Hopperstad,et al.  Experimental investigations on the behaviour of short to long square aluminium tubes subjected to axial loading , 2004 .

[39]  Ronald Gronsky,et al.  Quasi-static axial crush response of a thin-wall, stainless steel box component , 2004 .

[40]  Norman Jones,et al.  Dynamic buckling of elastic–plastic square tubes under axial impact—II: structural response , 2004 .

[41]  W. Abramowicz,et al.  Thin-walled structures as impact energy absorbers , 2003 .

[42]  Hasan Kurtaran,et al.  Crashworthiness design optimization using successive response surface approximations , 2002 .

[43]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[44]  T. Wierzbicki,et al.  Experimental and numerical studies of foam-filled sections , 2000 .

[45]  Odd Sture Hopperstad,et al.  Crash behaviour of thin-walled aluminium members , 1998 .

[46]  A. Otubushin,et al.  Detailed validation of a non-linear finite element code using dynamic axial crushing of a square tube , 1998 .

[47]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[48]  T. Wierzbicki,et al.  Axial Crushing of Multicorner Sheet Metal Columns , 1989 .

[49]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[50]  R. L. Hardy.  Multiquadric equations of topography and other irregular surfaces , 1971 .

[51]  Tongxi Yu,et al.  Dynamic crushing of the circular-celled honeycombs under out-of-plane impact , 2015 .

[52]  Zonghua Zhang,et al.  Analysis of energy absorption characteristics of cylindrical multi-cell columns , 2013 .

[53]  Julian Happian-Smith,et al.  An Introduction to Modern Vehicle Design , 2002 .

[54]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[55]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .