Fiber Orientation Reconstruction from SEM Images of Fiber-Reinforced Composites

The orientation of fibers in composites reinforced with short fibers can provide insight into the microstructure of the material and considerably affect its macroscopic characteristics. However, the present standard techniques for detecting fiber orientation and length based on microscopic image processing have faults in practical applications, including high effort, low efficiency, and unreliable measurement results. In this study, a method for measuring fiber orientation based on 3D reconstructions of scanning electron microscope (SEM) images is provided. The geodesic active contour (GAC) model is applied to segment the fibers in the SEM images. Matching the fiber contours with the scale-invariant feature transformation (SIFT) algorithm successfully extracts 3D orientation information from the fiber contours. The unit vector of the fiber axis is fitted from the extracted point cloud using the ordinary least squares (OLS) method. With a maximum deviation of 3.83° and an average deviation of 1.50°, the measurement findings of this method are substantially comparable to those of the image-measuring instrument. This paper offers a quantitative approach to studying the microstructure of short fiber-reinforced composites, thereby furnishing objective evidence to support the development and research of such materials.

[1]  Ryota Watanabe,et al.  Insight into interfacial compatibilization of glass-fiber-reinforced polypropylene (PP) using maleic-anhydride modified PP employing infrared spectroscopic imaging , 2020 .

[2]  T. W. Clyne,et al.  An Introduction to Composite Materials , 2019 .

[3]  Kay André Weidenmann,et al.  Comparison and error estimation of 3D fibre orientation analysis of computed tomography image data for fibre reinforced composites , 2018 .

[4]  Abdul Nurunnabi,et al.  ROBUST CYLINDER FITTING IN THREE-DIMENSIONAL POINT CLOUD DATA , 2017 .

[5]  T. B. N. Thi,et al.  Measurement of fiber orientation distribution in injection-molded short-glass-fiber composites using X-ray computed tomography , 2015 .

[6]  P. Wapperom,et al.  Fiber orientation in the frontal region of a center-gated disk: Experiments and simulation , 2015 .

[7]  Claudio Feliciani,et al.  Measurement and numerical prediction of fiber-reinforced thermoplastics' thermal conductivity in injection molded parts , 2014 .

[8]  Francesca Cosmi,et al.  Analysis of fibre orientation distribution in short fibre reinforced polymers: A comparison between optical and tomographic methods , 2012 .

[9]  D. R. Paul,et al.  Morphology and mechanical properties of glass fiber reinforced Nylon 6 nanocomposites , 2011 .

[10]  Steven Nutt,et al.  Direct observation and measurement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging , 2004 .

[11]  Tae Jin Kang,et al.  Confocal microscopy measurement of the fiber orientation in short fiber reinforced plastics , 2001 .

[12]  Xiao Hu,et al.  Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites , 2000 .

[13]  C. Bernardo,et al.  A model to predict the strength of short fiber composites , 1999 .

[14]  R. Kimmel,et al.  Geodesic Active Contours , 1995, Proceedings of IEEE International Conference on Computer Vision.

[15]  Mahesh Gupta,et al.  Fiber orientation and mechanical properties of short‐fiber‐reinforced injection‐molded composites: Simulated and experimental results , 1993 .

[16]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[17]  George Pavlidis,et al.  Multi-image 3D reconstruction data evaluation , 2014 .

[18]  P. Wapperom,et al.  Unambiguous orientation in short fiber composites over small sampling area in a center-gated disk , 2012 .

[19]  C.R.F. Azevedo,et al.  Three-dimensional analysis of fracture, corrosion and wear surfaces , 2010 .

[20]  Anath Fischer,et al.  3D Reconstruction and Visualization of Microstructure Surfaces from 2D Images , 2007 .

[21]  Soon-Wook Kwon,et al.  Fitting range data to primitives for rapid local 3D modeling using sparse range point clouds , 2004 .

[22]  N. C. Davidson,et al.  A novel technique for determining the 3D spatial distribution of glass fibres in polymer composites , 1995 .