Potential application of Rankine and He-Brayton cycles to sodium fast reactors

Abstract Traditionally all the demos and/or prototypes of the sodium fast reactor (SFR) technology with power output, have used a steam sub-critical Rankine cycle. Sustainability requirement of Gen. IV reactors recommends exploring alternate power cycle configurations capable of reaching high thermal efficiency. By adopting the anticipated working parameters of next SFRs, this paper investigates the potential of some Rankine and He-Brayton layouts to reach thermal efficiencies as high as feasible, so that they could become alternates for SFR reactor balance of plant. The assessment has encompassed from sub-critical to super-critical Rankine cycles and combined cycles based on He-Brayton gas cycles of different complexity coupled to Organic Rankine Cycles. The sub-critical Rankine configuration reached at thermal efficiency higher than 43%, which has been shown to be a superior performance than any of the He-Brayton configurations analyzed. By adopting a super-critical Rankine arrangement, thermal efficiency would increase less than 1.5%. In short, according to the present study a sub-critical layout seems to be the most promising configuration for all those upcoming prototypes to be operated in the short term (10–15 years). The potential of super-critical CO2-Brayton cycles should be explored for future SFRs to be deployed in a longer run.

[1]  G. H. Babcock,et al.  Steam / its generation and use , 1972 .

[2]  Per F. Peterson,et al.  Multiple reheat helium Brayton cycles for sodium cooled fast reactors , 2008 .

[3]  Wolfgang Wagner,et al.  International Equations for the Saturation Properties of Ordinary Water Substance , 1987 .

[4]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .

[5]  Haihua Zhao,et al.  Use of Multiple Reheat Helium Brayton Cycles to Eliminate the Intermediate Heat Transfer Loop for Advanced Loop Type SFRs , 2009 .

[6]  S. A. Klein.  Development and integration of an equation‐solving program for engineering thermodynamics courses , 1993 .

[7]  J. I. Linares,et al.  Power cycle assessment of nuclear high temperature gas-cooled reactors , 2009 .

[8]  J. I. Linares,et al.  Assessment of Regenerative Reheating in Direct Brayton Power Cycles for High-Temperature Gas-Cooled Reactors , 2007 .

[9]  Mohamed S. El-Genk,et al.  Noble gas binary mixtures for gas-cooled reactor power plants , 2008 .

[10]  Per F. Peterson,et al.  Multiple-Reheat Brayton Cycles for Nuclear Power Conversion with Molten Coolants , 2003 .

[11]  Chang H. Oh,et al.  Brayton Cycle for High-Temperature Gas-Cooled Reactors , 2005 .

[12]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[13]  H. Baehr,et al.  An International Standard Formulation for the Thermodynamic Properties of 1,1,1,2‐Tetrafluoroethane (HFC‐134a) for Temperatures from 170 K to 455 K and Pressures up to 70 MPa , 1994 .