Finite Element Modelling of Composite Materials and Structures

Part 1 Review of composite materials: Overview Fundamentals of composites. Part 2 Fundamentals of finite element analysis. Part 3 Finite elements applied to composite materials: Composites and finite element analysis Definition of composite materials in finite element analysis. Part 4 Analytical and numerical modelling: Interlaminar stresses and free edge stresses Fracture and fracture mechanics Delamination Joining Fatigue.

[1]  N. J. Pagano,et al.  Influence of the free edge upon the strength of angle-ply laminates , 1973 .

[2]  S. Tang,et al.  A variational approach to edge stresses of circular cutouts in composites , 1979 .

[3]  B. Harris,et al.  Fatigue and accumulation of damage in reinforced plastics , 1977 .

[4]  D. E. Cooper,et al.  The Effects of Pin Elasticity, Clearance, and Friction on the Stresses in a Pin-Loaded Orthotropic Plate , 1987 .

[5]  Norman A. Fleck,et al.  Static Compression Failure of Carbon Fibre T800/924C Composite Plate with a Single Hole , 1990 .

[6]  T. Adam,et al.  An empirical fatigue-life model for high-performance fibre composites with and without impact damage , 1999 .

[7]  Leif Asp,et al.  Delamination buckling and growth for delaminations at different depths in a slender composite panel , 2001 .

[8]  F. L. Matthews,et al.  The strength of bolted joints in glass fibre/epoxy laminates , 1985 .

[9]  R. Talreja,et al.  Fatigue of composite materials: damage mechanisms and fatigue-life diagrams , 1981, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[10]  Zvi Hashin,et al.  Analysis of cracked laminates: a variational approach , 1985 .

[11]  Chien-Chang Lin,et al.  Method for Calculating the Interlaminar Stresses in Symmetric Laminates Containing a Circular Hole , 1991 .

[12]  D. Purslow,et al.  Some fundamental aspects of composites fractography , 1981 .

[13]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[14]  Seng-Chuan Tan,et al.  Stress Concentrations in Laminated Composites , 1994 .

[15]  Chang-Seon Hong,et al.  PAPERS : Three - Dimensional Finite Element Analysis of Interlaminar Stresses in Thick Composite Laminates , 1990 .

[16]  F. L. Matthews,et al.  A review of the strength of joints in fibre-reinforced plastics. Part 2. Adhesively bonded joints , 1982 .

[17]  L. J. Hart-Smith,et al.  Mechanically-Fastened Joints for Advanced Composites — Phenomenological Considerations and Simple Analyses , 1980 .

[18]  K. Schulte.  DEVELOPMENT OF MICRODAMAGE IN COMPOSITE LAMINATES DURING FATIGUE LOADING , 1983 .

[19]  J. Eisenmann,et al.  Macroscopic Fracture Mechanics of Advanced Composite Materials , 1971 .

[20]  S. G. Lekhnit︠s︡kiĭ.  Theory of elasticity of an anisotropic body , 1981 .

[21]  K. J. Pascoe,et al.  The behaviour of single-lap bolted joints in CFRP laminates , 1986 .

[22]  S. Ogin,et al.  Application of the Paris Equation to the Fatigue Growth of Transverse Ply Cracks , 1989 .

[23]  S. Gali,et al.  Two-Dimensional Interlaminar Stress Distribution within the Adhesive Layer of a Symmetrical Doubler Model , 1977 .

[24]  Asd Wang,et al.  A Stochastic Model for the Growth of Matrix Cracks in Composite Laminates , 1984 .

[25]  Ozcan Konur,et al.  Effect of the properties of the constituents on the fatigue performance of composites: a review , 1989 .

[26]  P. Camanho,et al.  Application of numerical methods to the strength prediction of mechanically fastened joints in composite laminates , 1999 .

[27]  P. Beaumont,et al.  The failure of fibre composites: An overview , 1989 .

[28]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[29]  V. Murti,et al.  A universal optimum quarter point element , 1986 .

[30]  E. F. Rybicki,et al.  Effect of Stacking Sequence and Lay-Up Angle on Free Edge Stresses Around a Hole in a Laminated Plate Under Tension , 1978 .

[31]  F. L. Matthews,et al.  Predicting Progressive Delamination of Composite Material Specimens via Interface Elements , 1999 .

[32]  George A. Kardomateas,et al.  An introduction to fatigue in metals and composites , 1996 .

[33]  Costas Soutis,et al.  Analysis of multiple matrix cracking in [±θm/90n]s composite laminates. Part 1: In-plane stiffness properties , 1992 .

[34]  Pedro P. Camanho,et al.  Stress analysis and strength prediction of mechanically fastened joints in FRP: A review , 1997 .

[35]  M. M. Mikulas,et al.  Effects of Orthotropy and Width on the Compression Strength of Graphite-Epoxy Panels with Holes , 1984 .

[36]  Costas Soutis,et al.  Analysis of multiple matrix cracking in [±θm/90n]s composite laminates. Part 2: Development of transverse ply cracks , 1992 .

[37]  N. J. Pagano,et al.  On the Calculation of Interlaminar Normal Stress in Composite Laminate , 1974 .

[38]  Sam Tang,et al.  Interlaminar Stresses of Uniformly Loaded Rectangular Composite Plates , 1976 .

[39]  B. L. Agarwal.  Static Strength Prediction of Bolted Joint in Composite Material , 1980 .

[40]  N. J. Pagano,et al.  Influence of End Constraint in the Testing of Anisotropic Bodies , 1968 .

[41]  MINISTRY OF DEFENCE,et al.  The Strength of Bolted Joints in Multi-Directional CFRP Laminates , 1975 .

[42]  Costas Soutis,et al.  Strain energy release rate associated with local delamination in cracked composite laminates , 1994 .

[43]  K. Berg.  PROBLEMS IN THE DESIGN OF JOINTS AND ATTACHMENTS , 1970 .

[44]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[45]  F. L. Matthews,et al.  A Finite Element Analysis of Single and Two-Hole Bolted Joints in Fibre Reinforced Plastic , 1981 .

[46]  P T Curtis,et al.  The fatigue behaviour of fibrous composite materials , 1989 .

[47]  Fz Hu,et al.  A 3-D failure analysis of scarf patch repaired CFRP plates , 1998 .

[48]  Kenneth Reifsnider,et al.  Fracture of fatigue-loaded composite laminates , 1982 .

[49]  J. G. Williams,et al.  The mixed-mode delamination of fibre composite materials , 1993 .

[50]  H. A. Evensen,et al.  Interlaminar Shear in Laminated Composites Under Generalized Plane Stress , 1970 .

[51]  A.S.D. Wang,et al.  Some New Results on Edge Effect in Symmetric Composite Laminates , 1977 .

[52]  Ramesh Talreja,et al.  A continuum mechanics characterization of damage in composite materials , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[53]  Jacob Aboudi,et al.  Stiffness reduction of cracked solids , 1987 .

[54]  E. Dill,et al.  Theory of Elasticity of an Anisotropic Elastic Body , 1964 .

[55]  James M. Whitney,et al.  Free-Edge Delamination of Tensile Coupons , 1972 .

[56]  R. Nuismer,et al.  Constitutive Relations of a Cracked Composite Lamina , 1988 .

[57]  Charles E.S. Ueng,et al.  Stresses Around a Pin-loaded Hole in Orthotropic Plates , 1984 .

[58]  R. Jamison.  The role of microdamage in tensile failure of graphite/epoxy laminates☆ , 1985 .

[59]  P. T. Curtis,et al.  On the transverse cracking and longitudinal splitting behaviour of glass and carbon fibre reinforced epoxy cross ply laminates and the effect of Poisson and thermally generated strain , 1979, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[60]  J. Whitney,et al.  Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations , 1974 .

[61]  N. J. Pagano,et al.  The Influence of Stacking Sequence on Laminate Strength , 1971 .

[62]  A. W. Leissa,et al.  Analysis of Heterogeneous Anisotropic Plates , 1969 .

[63]  William M. Murray,et al.  Fatigue and fracture of metals , 1952 .

[64]  Kenneth Reifsnider,et al.  Characterization and Analysis of Damage Mechanisms in Tension-Tension Fatigue of Graphite/Epoxy Laminates , 1984 .

[65]  K. Reifsnider,et al.  Internal Load Distribution Effects During Fatigue Loading of Composite Laminates , 1986 .

[66]  T. K. Obrien,et al.  Analysis of local delaminations and their influence on composite laminate behavior , 1985 .

[67]  N. J. Pagano,et al.  Interlaminar Stresses in Composite Laminates—An Approximate Elasticity Solution , 1974 .

[68]  Norman A. Fleck,et al.  Failure Prediction Technique for Compression Loaded Carbon Fibre-Epoxy Laminate with Open Holes , 1991 .

[69]  J. Whitney,et al.  Free-Edge Effects in the Characterization of Composite Materials , 1973 .

[70]  O. L. Bowie.  Analysis of an Infinite Plate Containing Radial Cracks Originating at the Boundary of an Internal Circular Hole , 1956 .

[71]  N. Laws,et al.  Stiffness changes in unidirectional composites caused by crack systems , 1983 .

[72]  Constantinos Soutis,et al.  Interlaminar stresses in composite laminates with a circular hole , 1997 .

[73]  A. Levy,et al.  Finite-Element Analysis of Interlaminar Shear in Fibrous Composites , 1971 .

[74]  Charles E. Harris,et al.  A Cumulative Damage Model for Continuous Fiber Composite Laminates with Matrix Cracking and Interply Delaminations , 1988 .

[75]  R. Pipes,et al.  Moiré Analysis of the Interlaminar Shear Edge Effect in Laminated Composites , 1971 .

[76]  T. O'Brien.  Characterization of delamination onset and growth in a composite laminate , 1982 .

[77]  John H. Crews,et al.  Interlaminar stress singularities at a straight free edge in composite laminates , 1981 .

[78]  L. Ingvar Eriksson,et al.  Contact stresses in bolted joints of composite laminates , 1986 .

[79]  M. Ashby,et al.  The fatigue damage mechanics of a carbon fibre composite laminate: I—development of the model , 1986 .

[80]  A.S.D. Wang,et al.  The Dependence of Transverse Cracking and Delamination on Ply Thickness in Graphite/Epoxy Laminates , 1982 .

[81]  Ramesh Talreja,et al.  Fatigue of composite materials , 1987 .

[82]  R. J. Nuismer,et al.  A Theory for Progressive Matrix Cracking in Composite Laminates , 1989 .

[83]  N. J. Pagano,et al.  Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension , 1970 .

[84]  Ramesh Talreja,et al.  Damage development in composites: Mechanisms and modelling , 1989 .

[85]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[86]  Costas Soutis,et al.  Effects of matrix cracking and hygrothermal stresses on the strain energy release rate for edge delamination in composite laminates , 1994 .

[87]  Gretchen B. Murri,et al.  Characterization of Mode I and Mode II delamination growth and thresholds in AS4/PEEK composites , 1990 .

[88]  F. L. Matthews,et al.  Stress distribution around a single bolt in fibre-reinforced plastic , 1982 .

[89]  J. Tong,et al.  On matrix crack growth in quasi-isotropic laminates—I. Experimental investigation , 1997 .

[90]  F. Chang,et al.  A Progressive Damage Model for Laminated Composites Containing Stress Concentrations , 1987 .

[91]  Constantinos Soutis,et al.  Progressive Matrix Cracking in Composite Laminates Loaded in Tension , 1992 .

[92]  C. Kassapoglou,et al.  An Efficient Method for the Calculation of Interlaminar Stresses in Composite Materials , 1986 .

[93]  T. A. Collings,et al.  On the bearing strengths of cfrp laminates , 1982 .

[94]  T. Adam,et al.  A Power Law Fatigue Damage Model for Fibre-Reinforced Plastic Laminates , 1986 .

[95]  E. F. Rybicki,et al.  Approximate Three-Dimensional Solutions for Symmetric Laminates Under Inplane Loading * , 1971 .

[96]  Kenneth Reifsnider,et al.  Stiffness-reduction mechanisms in composite laminates , 1982 .