A review on effect of phase change material encapsulation on the thermal performance of a system

[1]  D. Biswas,et al.  Thermal energy storage using sodium sulfate decahydrate and water , 1977 .

[2]  H. P. Garg,et al.  A solar water heater with a built-in latent heat storage , 1985 .

[3]  R. Werner.  Compatibility of organic latent heat storage materials and plastic container materials , 1987 .

[4]  P. Majumdar,et al.  A heat transfer model for phase-change thermal energy storage , 1990 .

[5]  Shigenori Tsuda,et al.  A study of the physical strength of fenitrothion microcapsules , 1991 .

[6]  Subrata Sengupta,et al.  An evaluation of phase change microcapsules for use in enhanced heat transfer fluids , 1991 .

[7]  P. Charunyakorn,et al.  Forced convection heat transfer in microencapsulated phase change material slurries: flow in circular ducts , 1991 .

[8]  M. Sokolov,et al.  Performance indicators for solar pipes with phase change storage , 1991 .

[9]  Byung Chul Shin,et al.  Prevention of supercooling and stabilization of inorganic salt hydrates as latent heat storage materials , 1992 .

[10]  An effective capacity approach to stefan problems using simple isoparametric elements , 1994 .

[11]  Young I. Cho,et al.  Forced convection heat transfer with phase-change-material slurries : turbulent flow in a circular tube , 1994 .

[12]  Jun-ichiro Yagi,et al.  Storage of thermal energy for effective use of waste heat from industries , 1995 .

[13]  Hassan E.S. Fath,et al.  Technical assessment of solar thermal energy storage technologies , 1998 .

[14]  A. Oliva,et al.  Numerical simulation of a latent heat thermal energy storage system with enhanced heat conduction , 1998 .

[15]  Mehmet Esen,et al.  Geometric design of solar-aided latent heat store depending on various parameters and phase change materials , 1998 .

[16]  R. Velraj,et al.  Heat transfer enhancement in a latent heat storage system , 1999 .

[17]  Laurent Royon,et al.  Forced convection heat transfer in a slurry of phase change material in an agitated tank , 2000 .

[18]  Tian Jian Lu,et al.  Thermal management of high power electronics with phase change cooling , 2000 .

[19]  S. H. Choi,et al.  Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes , 2000 .

[20]  Kamal Abdel Radi Ismail,et al.  Solidification of pcm inside a spherical capsule , 2000 .

[21]  B. Zivkovic,et al.  An analysis of isothermal phase change of phase change material within rectangular and cylindrical containers , 2001 .

[22]  D. Hittle.  Phase Change Materials in Floor Tiles for Thermal Energy Storage , 2002 .

[23]  Xianxu Hu,et al.  Novel insight and numerical analysis of convective heat transfer enhancement with microencapsulated phase change material slurries: laminar flow in a circular tube with constant heat flux , 2002 .

[24]  G. Sun,et al.  Mechanical strength of microcapsules made of different wall materials. , 2002, International journal of pharmaceutics.

[25]  Kamal Abdel Radi Ismail,et al.  Numerical and experimental study of spherical capsules packed bed latent heat storage system , 2002 .

[26]  Rui Yang,et al.  Preparation, physical property and thermal physical property of phase change microcapsule slurry and phase change emulsion☆ , 2003 .

[27]  L. Cabeza,et al.  PCM-module to improve hot water heat stores with stratification , 2003 .

[28]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[29]  I. Alatiqi,et al.  Heat transfer enhancement by metal screens and metal spheres in phase change energy storage systems , 2004 .

[30]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[31]  Hisham Ettouney,et al.  Heat Transfer Characteristics during Melting and Solidification of Phase Change Energy Storage Process , 2004 .

[32]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[33]  Ahmet Sarı,et al.  Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .

[34]  F. L. Tan,et al.  Cooling of mobile electronic devices using phase change materials , 2004 .

[35]  U. Stritih.  An experimental study of enhanced heat transfer in rectangular PCM thermal storage , 2004 .

[36]  Kit-Lun Yick,et al.  Structure and thermal stability of microencapsulated phase-change materials , 2004 .

[37]  X. X. Zhang,et al.  Super-cooling prevention of microencapsulated phase change material , 2004 .

[38]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[39]  Peter Schossig,et al.  Micro-encapsulated paraffin in phase-change slurries , 2005 .

[40]  Gleb B. Sukhorukov,et al.  Intelligent micro- and nanocapsules , 2005 .

[41]  Jinjia Wei,et al.  Study on a PCM heat storage system for rapid heat supply , 2005 .

[42]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[43]  S. Medved,et al.  Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres , 2005 .

[44]  K Darkwa,et al.  Thermal Analysis of Composite Phase Change Drywall Systems , 2005 .

[45]  J. Su,et al.  Preparation and mechanical properties of thermal energy storage microcapsules , 2005 .

[46]  Philip C. Eames,et al.  Thermal behaviour of integrated solar collector/storage unit with 65 °C phase change material , 2006 .

[47]  Luisa F. Cabeza,et al.  Modelization of a water tank including a PCM module , 2006 .

[48]  E. Mettawee,et al.  Experimental study of a compact PCM solar collector , 2006 .

[49]  I. Alatiqi,et al.  Heat transfer enhancement in energy storage in spherical capsules filled with paraffin wax and metal beads , 2006 .

[50]  L. Cabeza,et al.  Experimentation with a water tank including a PCM module , 2006 .

[51]  Yi Li,et al.  Thermal stability of composite phase change material microcapsules incorporated with silver nano-particles , 2007 .

[52]  Miroslaw Zukowski,et al.  Experimental study of short term thermal energy storage unit based on enclosed phase change material in polyethylene film bag , 2007 .

[53]  Stéphane Citherlet,et al.  Numerical model and experimental validation of heat storage with phase change materials , 2007 .

[54]  Binjiao Chen,et al.  Flow and heat transfer behaviors of phase change material slurries in a horizontal circular tube , 2007 .

[55]  R. Velraj,et al.  Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources , 2007 .

[56]  Cecilia Castellón,et al.  Use of Microencapsulated Phase Change Materials in Building Applications , 2007 .

[57]  Arun S. Mujumdar,et al.  Application of phase change materials in thermal management of electronics , 2007 .

[58]  T. Newell,et al.  Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux , 2007 .

[59]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[60]  Miroslaw Zukowski,et al.  Mathematical modeling and numerical simulation of a short term thermal energy storage system using phase change material for heating applications , 2007 .

[61]  K. Kaygusuz,et al.  Experimental study on melting/solidification characteristics of a paraffin as PCM , 2007 .

[62]  Xingxiang Zhang,et al.  Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content , 2007 .

[63]  E. Onder,et al.  The manufacture of microencapsulated phase change materials suitable for the design of thermally enhanced fabrics , 2007 .

[64]  Subrata Mondal,et al.  Phase change materials for smart textiles – An overview , 2008 .

[65]  S. Iniyan,et al.  Experimental and analytical investigation of solidification and melting characteristics of PCMs inside cylindrical encapsulation , 2008 .

[66]  Zhengguo Zhang,et al.  Preparation and characterization of novel nanoencapsulated phase change materials , 2008 .

[67]  A. Sari,et al.  Preparation, characterization and thermal properties of styrene maleic anhydride copolymer (SMA)/fatty acid composites as form stable phase change materials , 2008 .

[68]  R. Velraj,et al.  Phase change material-based building architecture for thermal management in residential and commercial establishments , 2008 .

[69]  Long Jian-you,et al.  Numerical and experimental investigation for heat transfer in triplex concentric tube with phase change material for thermal energy storage , 2008 .

[70]  A. Kribus,et al.  PCM storage for solar DHW: An unfulfilled promise? , 2008 .

[71]  S. C. Solanki,et al.  Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .

[72]  Zhenzhong Yang,et al.  Synthesis and properties of paraffin capsules as phase change materials , 2008 .

[73]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[74]  Binjiao Chen,et al.  An experimental study of convective heat transfer with microencapsulated phase change material suspension: Laminar flow in a circular tube under constant heat flux , 2008 .

[75]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[76]  A. Sari,et al.  Microencapsulated n-octacosane as phase change material for thermal energy storage , 2009 .

[77]  Hamid El Qarnia,et al.  Numerical analysis of a coupled solar collector latent heat storage unit using various phase change materials for heating the water , 2009 .

[78]  Xiaodong Wang,et al.  Synthesis and properties of microencapsulated n-octadecane with polyurea shells containing different soft segments for heat energy storage and thermal regulation , 2009 .

[79]  Jianlei Niu,et al.  Heat transfer characteristics of microencapsulated phase change material slurry in laminar flow under constant heat flux , 2009 .

[80]  Hui Li,et al.  Preparation and characterization of nano-encapsulated n-tetradecane as phase change material for thermal energy storage , 2009 .

[81]  P. Xi,et al.  Preparation and characterization of a novel polymeric based solid–solid phase change heat storage material , 2009 .

[82]  Liwu Fan,et al.  Experimental and computational study of constrained melting of phase change materials (PCM) inside a spherical capsule , 2009 .

[83]  M. Rady.  Granular phase change materials for thermal energy storage: experiments and numerical simulations , 2009 .

[84]  S. D. Pohekar,et al.  Performance enhancement in latent heat thermal storage system: A review , 2009 .

[85]  A. Sari,et al.  Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage , 2009 .

[86]  S. Iniyan,et al.  Phase change characteristic study of spherical PCMs in solar energy storage , 2009 .

[87]  Kamal Abdel Radi Ismail,et al.  A numerical and experimental investigation of different containers and PCM options for cold storage modular units for domestic applications , 2009 .

[88]  R. L. Sawhney,et al.  Solar water heaters with phase change material thermal energy storage medium: A review , 2009 .

[89]  Na Zhu,et al.  Dynamic characteristics and energy performance of buildings using phase change materials: A review , 2009 .

[90]  S. C. Solanki,et al.  An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation , 2009 .

[91]  Said Al-Hallaj,et al.  Micro-channel heat sink with slurry of water with micro-encapsulated phase change material : 3D-numerical study , 2009 .

[92]  P. Xue,et al.  Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage , 2009 .

[93]  Takahiro Nomura,et al.  Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant , 2010 .

[94]  T. Kousksou,et al.  Encapsulated phase change material under cyclic pulsed heat load , 2010 .

[95]  G. Song,et al.  Preparation and characterization of flame retardant form-stable phase change materials composed by EPDM, paraffin and nano magnesium hydroxide , 2010 .

[96]  Viktoria Martin,et al.  Direct contact PCM-water cold storage , 2010 .

[97]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[98]  Jianlei Niu,et al.  Experimental investigation of effects of supercooling on microencapsulated phase-change material (MPCM) slurry thermal storage capacities , 2010 .

[99]  Ruzhu Wang,et al.  Preparation and thermal characterization of expanded graphite/paraffin composite phase change material , 2010 .

[100]  G. Fang,et al.  Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material , 2010 .

[101]  G. Fang,et al.  Synthesis and properties of microencapsulated paraffin composites with SiO2 shell as thermal energy storage materials , 2010 .

[102]  M. Kenisarin.  High-temperature phase change materials for thermal energy storage , 2010 .

[103]  L. Ventolà,et al.  Phase Change Materials (PCM) microcapsules with different shell compositions: Preparation, characterization and thermal stability , 2010 .

[104]  Huanzhi Zhang,et al.  Silica encapsulation of n-octadecane via sol-gel process: a novel microencapsulated phase-change material with enhanced thermal conductivity and performance. , 2010, Journal of colloid and interface science.

[105]  Ruzhu Wang,et al.  An overview of phase change material slurries: MPCS and CHS , 2010 .

[106]  R. Velraj,et al.  Review on free cooling of buildings using phase change materials , 2010 .

[107]  Wei Li,et al.  UV irradiation-initiated MMA polymerization to prepare microcapsules containing phase change paraffin , 2010 .

[108]  Mohammed M. Farid,et al.  The use of PCM panels to improve storage condition of frozen food. , 2010 .

[109]  Armando C. Oliveira,et al.  Experimental study of natural convection heat transfer in a microencapsulated phase change material slurry , 2010, Energy.

[110]  M. E. Navarro,et al.  Effect of microencapsulated phase change material in sandwich panels , 2010 .

[111]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[112]  Yvan Dutil,et al.  A review on phase-change materials: Mathematical modeling and simulations , 2011 .

[113]  Liwu Fan,et al.  Thermal conductivity enhancement of phase change materials for thermal energy storage: A review , 2011 .

[114]  Zhonghao Rao,et al.  Experiment on heat storage characteristic of microencapsulated phase change material slurry , 2011 .

[115]  Changying Zhao,et al.  Review on microencapsulated phase change materials (MEPCMs): Fabrication, characterization and applications , 2011 .

[116]  Guiyin Fang,et al.  Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change material , 2011 .

[117]  S. C. Kaushik,et al.  DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .

[118]  G. Guiffant,et al.  Investigation on heat transfer properties of slurry of stabilized paraffin during a melting process , 2011 .

[119]  Guiyin Fang,et al.  Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review , 2011 .

[120]  Zhonghao Rao,et al.  Experimental evaluation on natural convection heat transfer of microencapsulated phase change materials slurry in a rectangular heat storage tank , 2012 .

[121]  Murat Kenisarin,et al.  Form-stable phase change materials for thermal energy storage , 2012 .

[122]  Jo Darkwa,et al.  Thermal simulation of composite high conductivity laminated microencapsulated phase change material (MEPCM) board , 2012 .