A Large-Signal and Dynamic Circuit Model of a $\hbox{H}_{2}/\hbox{O}_{2}$ PEM Fuel Cell: Description, Parameter Identification, and Exploitation

The authors propose a large-signal and dynamic circuit model for a proton exchange membrane fuel cell, which includes the following different main physical and chemical phenomena: activation, electrochemical double layer, gas diffusion through the gas diffusion and active layers, and ohmic losses. Be careful: this is not an impedance model. This model will be used in studying the interactions between fuel cells and power converters which are connected and, particularly, the fuel-cell behavior facing the perturbations created by the buck converter and the single-phase inverter.

[1]  Hui Li,et al.  A novel ZVS-ZCS bidirectional DC-DC converter for fuel cell and battery application , 2004 .

[2]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[3]  Phatiphat Thounthong,et al.  Control Strategy of Fuel Cell and Supercapacitors Association for a Distributed Generation System , 2007, IEEE Transactions on Industrial Electronics.

[4]  A. Bhat,et al.  A Comparison of Soft-Switched DC-DC Converters for Fuel Cell to Utility Interface Application , 2007 .

[5]  T. Meynard,et al.  Interactions Between Fuel Cells and Power Converters: Influence of Current Harmonics on a Fuel Cell Stack , 2007, IEEE Transactions on Power Electronics.

[6]  F.Z. Peng,et al.  Comparison of Traditional Inverters and $Z$ -Source Inverter for Fuel Cell Vehicles , 2004, IEEE Transactions on Power Electronics.

[7]  S. R. Shaw,et al.  A dynamic PEM fuel cell model , 2006, IEEE Transactions on Energy Conversion.

[8]  S. Yuvarajan,et al.  Electronic circuit model for proton exchange membrane fuel cells , 2005 .

[9]  Daniel Hissel,et al.  Power generation by fuel cells , 2007, IEEE Industrial Electronics Magazine.

[10]  Xu Qingshan,et al.  PEM Fuel Cell modeling and parameter influences of performance evaluation , 2008, 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.

[11]  D. Hissel,et al.  PEM fuel cell modeling with static-dynamic decomposition and voltage rebuilding , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[12]  G.L. Arsov,et al.  Improved parametric PSpice model of a PEM fuel cell , 2008, 2008 11th International Conference on Optimization of Electrical and Electronic Equipment.

[13]  Phatiphat Thounthong,et al.  Fuel Cell Current Ripple Mitigation by Interleaved Technique for High Power Applications , 2009, 2009 IEEE Industry Applications Society Annual Meeting.

[14]  Guillaume Fontes,et al.  Modélisation et caractérisation de la pile PEM pour l'étude des interactions avec les convertisseurs statiques , 2005 .

[15]  Raghunathan Rengaswamy,et al.  Solid Oxide Fuel Cell Modeling , 2009, IEEE Transactions on Industrial Electronics.

[16]  N.A. Rahim,et al.  Fuel Cell Model for Three-Phase Inverter , 2006, 2006 IEEE International Power and Energy Conference.

[17]  S. Rael,et al.  Modelling of the proton exchange membrane fuel cell in steady state , 2008, 2008 IEEE Power Electronics Specialists Conference.

[18]  M.H. Nehrir,et al.  Comparison and Identification of Static Electrical Terminal Fuel Cell Models , 2007, IEEE Transactions on Energy Conversion.

[19]  N.A. Rahim,et al.  Dynamic and control of fuel cell system , 2008, 2008 3rd IEEE Conference on Industrial Electronics and Applications.

[20]  F.Z. Peng,et al.  Low cost fuel cell converter system for residential power generation , 2004, IEEE Transactions on Power Electronics.

[21]  P.N. Enjeti,et al.  Development of a robust anti-islanding algorithm for utility interconnection of distributed fuel cell powered generation , 2004, IEEE Transactions on Power Electronics.

[22]  G. Capponi,et al.  Fuel cell modelling for power supply systems design , 2008, 2008 11th Workshop on Control and Modeling for Power Electronics.

[23]  P. Thounthong,et al.  Fuel cell high-power applications , 2009, IEEE Industrial Electronics Magazine.

[24]  Remi Saisset,et al.  Bond Graph model of a PEM fuel cell , 2006 .