Ultra-low Pt loading for proton exchange membrane fuel cells by catalyst coating technique with ultrasonic spray coating machine

[1]  Bruno G. Pollet,et al.  The effect of materials on proton exchange membrane fuel cell electrode performance , 2011 .

[2]  Bruno G. Pollet,et al.  A novel method for preparing proton exchange membrane fuel cell electrodes by the ultrasonic-spray technique , 2011 .

[3]  P. Brault,et al.  High Performance plasma sputtered PdPt fuel cell electrodes with ultra low loading , 2011 .

[4]  Rafael Nogueira Bonifácio,et al.  Catalyst layer optimization by surface tension control during ink formulation of membrane electrode , 2011 .

[5]  Jon G. Pharoah,et al.  Electrochemical Activity and Catalyst Utilization of Low Pt and Thickness Controlled Membrane Electrode Assemblies , 2011 .

[6]  Antonio J. Martín,et al.  Catalyst layers for proton exchange membrane fuel cells prepared by electrospray deposition on Nafion membrane , 2011 .

[7]  A. Manthiram,et al.  Fabrication of catalyst-coated membrane-electrode assemblies by doctor blade method and their performance in fuel cells , 2010 .

[8]  P. Garcia-Ybarra,et al.  High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying , 2010 .

[9]  Antonio J. Martín,et al.  Properties of Catalyst Layers for PEMFC Electrodes Prepared by Electrospray Deposition , 2010 .

[10]  P. Garcia-Ybarra,et al.  Electrospray deposition of catalyst layers with ultra-low Pt loadings for PEM fuel cells cathodes , 2010 .

[11]  Cheng Xu,et al.  Accelerated durability tests of catalyst layers with various pore volume for catalyst coated membranes applied in PEM fuel cells , 2010 .

[12]  B. Yi,et al.  A new hydrophobic thin film catalyst layer for PEMFC , 2010 .

[13]  S. Mukerjee,et al.  Enhanced activity and interfacial durability study of ultra low Pt based electrocatalysts prepared by ion beam assisted deposition (IBAD) method , 2009 .

[14]  K. Karan,et al.  Preparation of Ultra-Thin Catalyst Layers by Piezo-electric Printer for PEMFCs Applications , 2009, ECS Transactions.

[15]  Antonio J. Martín,et al.  PEMFC electrode preparation by electrospray: Optimization of catalyst load and ionomer content , 2009 .

[16]  P. Brault,et al.  Performance of plasma sputtered fuel cell electrodes with ultra-low Pt loadings , 2009 .

[17]  EunAe Cho,et al.  Effects of MEA fabrication method on durability of polymer electrolyte membrane fuel cells , 2008 .

[18]  Frano Barbir,et al.  Status and development of PEM fuel cell technology , 2008 .

[19]  André D. Taylor,et al.  Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells , 2007 .

[20]  A. M. Chaparro,et al.  Study of membrane electrode assemblies for PEMFC, with cathodes prepared by the electrospray method , 2007 .

[21]  Sanjeev Mukerjee,et al.  High performance polymer electrolyte fuel cells with ultra-low Pt loading electrodes prepared by dual ion-beam assisted deposition , 2006 .

[22]  S. Mukerjee,et al.  Toward Improving the Performance of PEM Fuel Cell by Using Mix Metal Electrodes Prepared by Dual IBAD , 2006 .

[23]  A. M. Chaparro,et al.  Electrochemical characterisation of Pt/C suspensions for the reduction of oxygen , 2005 .

[24]  J. Soler,et al.  Novel method for preparation of PEMFC electrodes by the electrospray technique , 2005 .

[25]  S. Mukerjee,et al.  Dual Ion-Beam-Assisted Deposition as a Method to Obtain Low Loading-High Performance Electrodes for PEMFCs , 2005 .

[26]  G. Sasikumar,et al.  Optimum Nafion content in PEM fuel cell electrodes , 2004 .

[27]  C. Wan,et al.  An innovative process for PEMFC electrodes using the expansion of Nafion film , 2003 .

[28]  Brian D. James,et al.  Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications. 2008 Update , 2010 .

[29]  D. Gall,et al.  Sputter-Deposited Pt/CrN Nanoparticle PEM Fuel Cell Cathodes: Limited Proton Conductivity Through Electrode Dewetting , 2010 .