Responses of organic and inorganic materials to intense EUV radiation from laser-produced plasmas

We have investigated responses of polymers to EUV radiation from laser-produced plasmas beyond ablation thresholds and micromachining. We concentrated on fabricate precise 3D micro-structures of PDMS, PMMA, acrylic block copolymers (BCP), and silica. The micromachining technique can be applied to three-dimensional micro-fluidic and bio-medical devices. The EUV processing is a promising to realize a practical micromachining technique. In the present work, we used two EUV radiation sources; (a) Wide band EUV light in a range of 10{300 eV was generated by irradiation of Ta targets with Nd:YAG laser light at 500 mJ/pulse. (b) Narrow band EUV light at 11 and 13 nm was generated by irradiation of solid Xe and Sn targets, respectively, with pulsed TEA CO2 laser light. The generated EUV light was condensed onto the materials at high power density beyond the ablation thresholds, using ellipsoidal mirrors. We found that through-holes with a diameter of one micrometer an be fabricated in PMMA and PDMS sheets with thicknesses of 4-10 micrometers, at 250 and 230 nm/shot, respectively. The effective ablation of PMMA sheets can be applied to a LIGA-like process for fabricating micro-structures of metals for micro- and nano-molds. PDMS sheets are ablated if it is irradiated with EUV light beyond a distinct threshold power density, while PDMS surfaces were modified at lower power densities. Furthermore, BCP sheets were ablated to have 1-micrometer structures. Thus, we have developed a practical technique for micromachining of PMMA, PDMS and BCP sheets in a micrometer scale.

[1]  Koji Sugioka,et al.  Multiwavelength excitation by vacuum‐ultraviolet beams coupled with fourth harmonics of a Q‐switched Nd:YAG laser for high‐quality ablation of fused quartz , 1995 .

[2]  K. Sugioka,et al.  High-speed machining of glass materials by laser-induced plasma-assisted ablation using a 532-nm laser , 1998 .

[3]  Tsuneo Urisu,et al.  Scanning tunneling microscopy study of Si(111) surface morphology after removal of SiO2 by synchrotron radiation illumination , 2000 .

[4]  S. Puschmann,et al.  Fabrication of submicron gratings in fused silica by F2-laser ablation , 2003 .

[5]  Hiroyuki Niino,et al.  Silica nanomachining using laser plasma soft x rays , 2006 .

[6]  Tsuneo Urisu,et al.  Oxygen addition effects in synchrotron radiation excited etching using SF6 , 1991 .

[7]  Robin S. Marjoribanks,et al.  Laser shaping of photonic materials: deep-ultraviolet and ultrafast lasers , 2000 .

[8]  Takashi Goto,et al.  New microfabrication technique by synchrotron radiation‐excited etching: Use of noncontact mask on a submicrometer scale , 1994 .

[9]  J Zhang,et al.  Direct fabrication of microgratings in fused quartz by laser-induced plasma-assisted ablation with a KrF excimer laser. , 1998, Optics letters.

[10]  Y. Utsumi,et al.  Photostimulated evaporation of SiO2 and Si3N4 films by synchrotron radiation and its application for low‐temperature cleaning of Si surfaces , 1991 .

[11]  Peter R. Herman,et al.  X-ray emission spectroscopic studies of silicon precipitation in surface layer of SiO2 induced by argon excimer laser irradiation , 1998 .

[12]  Nobuo Hayasaka,et al.  Synchrotron radiation‐excited etching of SiO2 with SF6 at 143 and 251 Å using undulator radiation , 1990 .

[13]  K Tsuchida,et al.  High-power argon excimer laser at 126 nm pumped by an electron beam. , 1984, Optics letters.

[14]  Koji Sugioka,et al.  Ablation of Fused Quartz by Ultraviolet, Visible or Infrared Laser Coupled with VUV Laser , 1996 .

[15]  K. Sugioka,et al.  Laser-induced plasma-assisted ablation of fused quartz using the fourth harmonic of a Nd+:YAG laser , 1998 .

[16]  Koji Sugioka,et al.  Multiwavelength irradiation effect in fused quartz ablation using vacuum-ultraviolet Raman laser , 1996 .

[17]  Tsuneo Urisu,et al.  Photostimulated evaporation of SiO2 films by synchrotron radiation , 1990 .

[18]  Tsuneo Urisu,et al.  Direct observation of synchrotron-radiation-stimulated desorption of thin SiO2 films on Si(111) by scanning tunneling microscopy , 1999 .

[19]  C. Cerjan,et al.  Conversion efficiencies from laser-produced plasmas in the extreme ultraviolet regime , 1996 .

[20]  Koji Sugioka,et al.  Influence of laser fluence and irradiation timing of F2 laser on ablation properties of fused silica in F2-KrF excimer laser multi-wavelength excitation process , 2001 .

[21]  Tsuneo Urisu,et al.  Synchrotron radiation‐excited chemical‐vapor deposition and etching , 1987 .

[22]  Yoshihide Inoue,et al.  Vacuum Ultraviolet Laser-Induced Surface Alteration of SiO2 , 1991 .

[23]  Hiroyuki Niino,et al.  Direct micromachining of quartz glass plates using pulsed laser plasma soft x-rays , 2005 .

[24]  Vesselin N. Paunov,et al.  157-nm laser micromachining of N-BK7 glass and replication for microcontact printing , 2003 .

[25]  Koji Sugioka,et al.  Dual-beam ablation of fused silica by multiwavelength excitation process using KrF excimer and F2 lasers , 2000 .

[26]  Kiminori Kondo,et al.  Quartz micromachining using laser plasma soft x rays and ultraviolet laser light , 2004 .

[27]  J Gautier,et al.  Non-thermal desorption/ablation of molecular solids induced by ultra-short soft x-ray pulses. , 2009, Optics express.

[28]  Tsuneo Urisu,et al.  SR-stimulated etching and OMVPE growth for semiconductor nanostructure fabrication , 2000 .

[29]  T. Urisu,et al.  Synchrotron Radiation Stimulated Etching of SiO2 Thin Films with a Co Contact Mask for the Area-Selective Deposition of Self-Assembled Monolayer , 2002, 2002 International Microprocesses and Nanotechnology Conference, 2002. Digest of Papers..

[30]  Akazawa.  Synchrotron-radiation-stimulated evaporation and defect formation in a-SiO2. , 1994, Physical review. B, Condensed matter.

[31]  B. L. Henke,et al.  X-Ray Interactions: Photoabsorption, Scattering, Transmission, and Reflection at E = 50-30,000 eV, Z = 1-92 , 1993 .

[32]  Koji Sugioka,et al.  Micropatterning of Quartz Substrates by Multi-WavelengthVacuum-Ultraviolet Laser Ablation , 1993 .