From rheological to original three-dimensional mechanical modelling of semi-crystalline polymers: Application to a wide strain rate range and large deformation of Ultra-High Molecular Weight PolyEthylene

[1]  M. Fivel,et al.  1D strain rate-dependent constitutive model of UHMWPE: From crystalline network to fibrillar structure behavior , 2019, Mechanics of Materials.

[2]  S. Ahzi,et al.  A thermodynamic analysis of Argon's yield stress model: Extended influence of strain rate and temperature , 2019, Mechanics of Materials.

[3]  K. Ogawa,et al.  Three-dimensional constitutive model for the description of high molecular weight semicrystalline polymers over a large range of temperatures and strain rates: Application to Ultra High Molecular Weight PolyEthylene , 2018 .

[4]  Z. Bartczak.  Evaluation of effective density of the molecular network and concentration of the stress transmitters in amorphous layers of semicrystalline polyethylene , 2018, Polymer Testing.

[5]  O. Lame,et al.  Critical stress and thermal activation of crystal plasticity in polyethylene: Influence of crystal microstructure and chain topology , 2017 .

[6]  M. Jia,et al.  Crystal Structure Evolution of UHMWPE/HDPE Blend Fibers Prepared by Melt Spinning , 2017, Polymers.

[7]  M. Poluektov,et al.  Micromechanics of semicrystalline polymers: towards quantitative predictions , 2017 .

[8]  J. P. Torres,et al.  Deformation and failure of semicrystalline polymers under dynamic tensile and biaxial impact loading , 2016 .

[9]  J. P. Torres,et al.  Mechanics of polycarbonate in biaxial impact loading , 2016 .

[10]  C. Rochas,et al.  In situ SAXS/WAXS investigation of the structural evolution of poly(vinylidene fluoride) upon uniaxial stretching , 2016 .

[11]  K. Ogawa,et al.  Development of Ultra-High Molecular Weight Polyethylene (UHMWPE) Coating by Cold Spray Technique , 2015, Journal of Thermal Spray Technology.

[12]  Marc Fivel,et al.  Outstanding cavitation erosion resistance of Ultra High Molecular Weight Polyethylene (UHMWPE) coatings , 2015 .

[13]  M. Kaliske,et al.  Formulation and implementation of a constitutive model for semicrystalline polymers , 2014 .

[14]  A. Galeski,et al.  Cavitation during deformation of semicrystalline polymers , 2014 .

[15]  Y. Rémond,et al.  Structural mechanics of semicrystalline polymers prior to the yield point: a review , 2012, Journal of Materials Science.

[16]  O. Lame,et al.  A re-examination of the elastic modulus dependence on crystallinity in semi-crystalline polymers , 2011 .

[17]  F. Zaïri,et al.  Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling , 2011 .

[18]  G. G. Peters,et al.  Micromechanical modeling of the elastic properties of semicrystalline polymers: A three‐phase approach , 2010 .

[19]  A. Galeski,et al.  Plasticity of Semicrystalline Polymers , 2010 .

[20]  Moussa Nait-Abdelaziz,et al.  Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: Application to a high density polyethylene , 2010 .

[21]  L. Anand,et al.  A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation , 2009, International Journal of Plasticity.

[22]  Shawn A. Chester,et al.  A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications , 2009 .

[23]  S. Ahzi,et al.  Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers , 2008 .

[24]  Said Ahzi,et al.  Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates , 2007 .

[25]  Mary C. Boyce,et al.  Mechanics of the rate-dependent elastic¿plastic deformation of glassy polymers from low to high strain rates , 2006 .

[26]  Mary C. Boyce,et al.  Large deformation rate-dependent stress–strain behavior of polyurea and polyurethanes , 2006 .

[27]  K. Vecchio,et al.  A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates , 2005 .

[28]  S. Ahzi,et al.  A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures , 2005 .

[29]  R. Seguela.  Critical review of the molecular topology of semicrystalline polymers: The origin and assessment of intercrystalline tie molecules and chain entanglements , 2005 .

[30]  Mary C. Boyce,et al.  Finite strain behavior of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate)-glycol (PETG) , 2005 .

[31]  S. Ahzi,et al.  A two-phase self-consistent model for the deformation and phase transformation behavior of polymers above the glass transition temperature: application to PET , 2005 .

[32]  S. Ahzi,et al.  Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperature , 2003 .

[33]  Q. Yuan,et al.  The viscoelastic and viscoplastic behavior of low-density polyethylene , 2003 .

[34]  Fpt Frank Baaijens,et al.  Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers , 2003 .

[35]  S. Nikolov,et al.  Multi-scale constitutive modeling of the small deformations of semi-crystalline polymers , 2002 .

[36]  K. Reifsnider,et al.  Property modeling across transition temperatures in polymers: application to thermoplastic systems , 2002 .

[37]  Simona Socrate,et al.  Constitutive model for the finite deformation stress–strain behavior of poly(ethylene terephthalate) above the glass transition , 2000 .

[38]  A. Gent.  A New Constitutive Relation for Rubber , 1996 .

[39]  O. Yeoh.  Some Forms of the Strain Energy Function for Rubber , 1993 .

[40]  E. Giessen,et al.  On Improved Network Models for Rubber Elasticity and Their Applications to Orientation Hardening in Glassy Polymers , 1993 .

[41]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[42]  Y. Benveniste,et al.  A new approach to the application of Mori-Tanaka's theory in composite materials , 1987 .

[43]  Anton Peterlin,et al.  Plastic deformation of crystalline polymers , 1977 .

[44]  A. Peterlin.  Plastic deformation of polymers with fibrous structure , 1975 .

[45]  A. Argon.  A theory for the low-temperature plastic deformation of glassy polymers , 1973 .

[46]  C. Bauwens-Crowet,et al.  The compression yield behaviour of polymethyl methacrylate over a wide range of temperatures and strain-rates , 1973 .

[47]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[48]  J. Bauwens.  Relation between the compression yield stress and the mechanical loss peak of bisphenol-A-polycarbonate in the β transition range , 1972 .

[49]  P. Gennes,et al.  Reptation of a Polymer Chain in the Presence of Fixed Obstacles , 1971 .

[50]  A. Peterlin,et al.  Molecular model of drawing polyethylene and polypropylene , 1971 .

[51]  J. Bauwens,et al.  Tensile yield‐stress behavior of glassy polymers , 1969 .

[52]  Rodney Hill,et al.  Theory of mechanical properties of fibre-strengthened materials—III. self-consistent model , 1965 .

[53]  H. Eyring.  Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates , 1936 .

[54]  A. Arias,et al.  A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: Application to PEEK under dynamic loading conditions , 2017 .

[55]  O. Lame,et al.  On the strain-induced fibrillar microstructure of polyethylene: Influence of chemical structure, initial morphology and draw temperature , 2016 .

[56]  S. Ahzi,et al.  A new three-phase model to estimate the effective elastic properties of semi-crystalline polymers: Application to PET , 2010 .

[57]  Alan Muhr,et al.  Constitutive Models for Rubber , 1999 .

[58]  Mary C. Boyce,et al.  Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers , 1995 .

[59]  L. Mandelkern.  The Relation between Structure and Properties of Crystalline Polymers , 1985 .

[60]  S. Edwards,et al.  Dynamics of concentrated polymer systems. Part 3.—The constitutive equation , 1978 .