Mesoscale modeling of ballistic impact experiments on a single layer of plain weave composite

[1]  B. Haque,et al.  Bridging length scales from micro to mesoscale through rate-dependent traction-separation law predictions , 2021, Composites Part B: Engineering.

[2]  S. Mahadevan,et al.  Calibration and Validation of Multiscale Model for Ultimate Strength Prediction of Composite Laminates Under Uncertainty , 2021, ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg.

[3]  D. O'Brien,et al.  MICROMECHANICAL FINITE ELEMENT PREDICTION OF INTERLAMINAR TRACTION-SEPARATION LAWS USING J-INTEGRAL APPROACH , 2021, American Society for Composites 2021.

[4]  I. Goda,et al.  Numerical modeling and analysis of the ballistic impact response of ceramic/composite targets and the influence of cohesive material parameters , 2021, International Journal of Damage Mechanics.

[5]  Christopher S. Meyer,et al.  Probabilistic modeling of discrete structural response with application to composite plate penetration models. , 2020, 2011.11780.

[6]  J. Gillespie,et al.  Strain rate-dependent large deformation inelastic behavior of an epoxy resin , 2020, Journal of Composite Materials.

[7]  J. Gillespie,et al.  Rate dependent mode II traction separation law for S-2 glass/epoxy interface using a microdroplet test method , 2019, Composites Part A: Applied Science and Manufacturing.

[8]  S. Chocron,et al.  Impact on carbon fiber composite: Ballistic tests, material tests, and computer simulations , 2019, International Journal of Impact Engineering.

[9]  C. Alexander,et al.  Numerical and experimental evaluations of a glass-epoxy composite material under high velocity oblique impacts , 2019, International Journal of Impact Engineering.

[10]  J. Gillespie,et al.  Assessment and quantification of ballistic impact damage of a single-layer woven fabric composite , 2019 .

[11]  C. Anderson,et al.  Bridging the scales: Continuum-based material constitutive modeling of mechanical and ballistic test data from composites and fabrics , 2018, International Journal of Impact Engineering.

[12]  C. Key,et al.  Experimental Testing and Numerical Modeling of Ballistic Impact on S-2 Glass/SC15 Composites , 2018, Journal of Dynamic Behavior of Materials.

[13]  G. Nilakantan.  Experimentally validated predictive finite element modeling of the V0-V100 probabilistic penetration response of a Kevlar fabric against a spherical projectile , 2018, International Journal of Protective Structures.

[14]  Christopher S. Meyer,et al.  Mesoscale ballistic damage mechanisms of a single-layer woven glass/epoxy composite , 2018 .

[15]  J. Gillespie,et al.  Experimental Investigation of Strain Rate and Temperature Dependent Response of an Epoxy Resin Undergoing Large Deformation , 2018, Journal of Dynamic Behavior of Materials.

[16]  C. Anderson,et al.  Mesoscale modeling of S-2 glass/SC-15 epoxy composites: Plain-weave architecture , 2016 .

[17]  Ryan L. Karkkainen.  Dynamic micromechanical modeling of textile composite strength under impact and multi-axial loading , 2015 .

[18]  Tuan Ngo,et al.  Influences of weaving architectures on the impact resistance of multi-layer fabrics , 2015 .

[19]  Stephen R Hallett,et al.  Mechanical modelling of 3D woven composites considering realistic unit cell geometry , 2014 .

[20]  John W. Gillespie,et al.  Ballistic impact modeling of woven fabrics considering yarn strength, friction, projectile impact location, and fabric boundary condition effects , 2012 .

[21]  Chian-Fong Yen,et al.  A ballistic material model for continuous-fiber reinforced composites , 2012 .

[22]  J. Gillespie,et al.  Finite element modeling of impact, damage evolution and penetration of thick-section composites , 2011 .

[23]  M. Keefe,et al.  Global/Local Modeling of Ballistic Impact onto Woven Fabrics , 2009 .

[24]  Stephan Marzi,et al.  A Rate-Dependent Cohesive Zone Model for Adhesively Bonded Joints Loaded in Mode I , 2009 .

[25]  Bryan Cheeseman,et al.  Modeling the role of friction during ballistic impact of a high-strength plain-weave fabric , 2005 .

[26]  Paolo Lonetti,et al.  Finite element continuum damage modeling of plain weave reinforced composites , 2005 .

[27]  T. Bogetti,et al.  Ballistic impact into fabric and compliant composite laminates , 2003 .

[28]  Tsu-Wei Chou,et al.  An Analytical and Experimental Study of Strength and Failure Behavior of Plain Weave Composites , 1998 .

[29]  C. Sun,et al.  A simple model to predict residual velocities of thick composite laminates subjected to high velocity impact , 1996 .